Table of Contents
Advertisement
11-10
Commissioning
Initial Start with DriveTop Commissioning Tool
DriveTop
Brief Description
After complete and correct assembly and wiring of the drive or the drives
it makes sense to establish the operatability. The easiest way to do this by
means of initial start in velocity-controlled operation.
For commissioning IndraDrive drives Bosch Rexroth makes available a
PC program with the product name "DriveTop".
By means of the DriveTop commissioning tool communication with the
drive can be established via
• SERCANS box (SYSDA02.2) and SERCOS interface
- or -
• serial interface RS232/RS485.
DriveTop offers the following possibilities and advantages:
• The functions and features made available by the drive are structurally
visualized, the respective parameter values are displayed in their
functional context.
• Parameter values can be directly changed and thereby adjusted to the
respective requirements.
• The parameter values available in the drive can be saved drive-
externally as a group (parameter set), e.g. on the PC hard disk, and
can be reloaded from the hard disk.
• Diagnostic messages and operating status messages are displayed in
clearly arranged form.
• The drive can be commissioned and moved via DriveTop.
• For commissioning purposes, it is possible to start commands via
DriveTop.
MPH-02, MPB-02, MPD-02
DOK-INDRV*-MP*-02VRS**-FK01-EN-P
Advertisement
Table of Contents
