Table of Contents
Advertisement
8-48
Drive Functions
8.5
Compensation Functions/Corrections
Friction Torque Compensation
Expansion package servo function (order code SRV) with closed-loop characteristic
Brief Description
The behavior of a machine axis is negatively affected by static friction
when starting or when reversing the direction. The drive-internal friction
torque compensation allows compensating the static friction by adding,
depending on the direction of movement, a torque/force command value.
M
frict
static
friction
Fig. 8-28:
Friction torque curve with static friction
Note:
Friction torque compensation is mainly intended to be used in
precision machine tools and to reduce the path errors caused
by static friction. This applies particularly to circular errors at
the quadrant transitions.
Pertinent Parameters
• S-0-0092, Bipolar torque/force limit value
• S-0-0124, Standstill window
• S-0-0155, Friction compensation
Operating Principle
The principle of friction torque compensation is that the known friction
component is pre-controlled (compensated) via an added torque/force
command value and does not have to be compensated by the controller.
This allows, especially when reversing the direction of movement,
improving the control behavior (little lag error). Precision of drive control is
thereby increased.
MPH-02, MPB-02, MPD-02
v
DK0017v1.fh7
DOK-INDRV*-MP*-02VRS**-FK01-EN-P
Advertisement
Table of Contents
