Ipv4 Address; Ipv4 Subnet Mask - Bosch B9512G Program Entry Manual
Security system
Hide thumbs
Also See for B9512G:
- Owner's manual (228 pages) ,
- Installation and system reference manual (186 pages) ,
- Installation manual (47 pages)
Table of Contents
Advertisement
Control Panel
Selections:
–
–
DHCP enables a computer to be automatically configured which eliminates the need for
interaction by a network administrator. DHCP also provides a central database that tracks
computers that connect to the network, which prevents two computers from accidentally
being configured with the same IP address.
AutoIP enables dynamic IP addresses to be assigned to a device when the device is started up.
DHCP requires a DHCP server.
When this parameter is set to Yes, the IPv4 address, IPv4 Subnet Mask, and IPv4 Default
Gateway are grayed out. You cannot change them.
When this parameter is set to No, set the IPv6 Mode parameter to No. When the IPv6 Mode
parameter is set to Yes, this parameter is not available (grayed out).
The parameter has no effect on B450 Plug-in Communicator Interface operation.
RPS Menu Location
SDI2 > B42x IP Communicator > IPv4 DHCP/AutoIP Enable
14.4.4
IPv4 Address
Default: 0.0.0.0
Selections: 0.0.0.0 to 255.255.255.255
This parameter sets the IPv4 address.
If the IPv4 DHCP/Auto IP Enable parameter is set to Yes, this parameter is grayed out (you do
not have access to it).
If the IPv4 DHCP/Auto IP Enable parameter is set to No, enter the IPv4 address here.
Further Information
IP Address and Domain Name formats, page 282
This parameter has no effect on B450 Plug-in Communicator Interface operation.
RPS Menu Location
SDI2 > B42x IP Communicator > IPv4 address
14.4.5
IPv4 Subnet Mask
Default: 255.255.255.0
Selections: 0.0.0.0 to 255.255.255.255
This parameter sets the address for the IPv4 Subnet Mask.
If the IPv4 DHCP/Auto IP Enable parameter is set to Yes, this parameter is grayed out (you do
not have access to it).
If the IPv4 DHCP/Auto IP Enable parameter is set to No, enter the IPv4 sub-network mask
here.
Subnetting breaks the network into more efficient subnets to prevent the excessive rates of
packet collision in a large network. A significant feature of subnets is the subnet mask.
Applying a subnet mask to an IP address allows control panels to more efficiently identify the
network and node parts of the address.
Further information
IP Address and Domain Name formats, page 282
The parameter has no effect on B450 Plug-in Communicator Interface operation.
RPS Menu Location
SDI2 > B42x IP Communicator > IPv4 Subnet Mask
Bosch Security Systems, Inc.
Yes - enable DHCP to automatically configure the IP Address, IP Default Gateway, and IP
DNS Server Address.
No - manually configure the IP Address, IP Default Gateway, and IP DNS Server Address.
Use this setting if there is no DHCP service.
Program Entry Guide
SDI2 modules | en 241
2017.03 | 09 | F.01U.303.998
- Quick Links:
- User Command
- Remote Programming Software
Hide quick links:
Advertisement
Table of Contents
