Page 1 Control Panels B9512G/B8512G/B6512/B5512/B4512/B3512 PREV HELP NEXT HH:MM DD/MM/YYYY PQRS WXYZ PREV ENTER NEXT PQRS WXYZ PQRS WXYZ Operation Manual National Security Systems (800)457-1999...
Page 2 National Security Systems (800)457-1999...
Page 3: Table Of Contents
How the system reports events Alarm events Priority of events Fire alarms Gas alarms User and burglary alarms Trouble events Fire trouble events Gas trouble events User and burglary trouble events System trouble events Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 4 15.1 View Area Status 15.2 View Point Status 15.3 Send Status Report B94x/B93x Actions menu 16.1 Reset 16.2 Outputs 16.3 Test 16.4 16.5 Go to area 16.6 Firmware 16.7 Service bypass 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 5: Control Panels Table Of Contents | En
B91x Keypad operation overview 22.1 Keys overview 22.2 Display overview 22.3 Status indicators overview B92x/B91x menu tree B92x/B91x On/Off menu 24.1 All On menu 24.2 Part On menu 24.3 Off menu 24.4 Extend Closing Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 6 B92x/B91x Settings menu 28.1 Watch Mode 28.2 Date/Time 28.3 Schedule (SKEDs) 28.4 Keypad B92x/B91x Shortcuts menu B92x/B91x Events menu 30.1 View Event Memory 30.2 Clear Event Memory 30.3 View Log D1260/D1255 keypads 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 7: Control Panels Table Of Contents | En
D1255 Series keypad overview 31.3 Operation overview Options 32.1 Two-man Rule 32.2 Early Ambush 32.3 Security system limitations 32.4 Cross points 32.5 Fire safety and evacuation 32.6 Multiple area systems Glossary Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 8: Introduction
The functions described in this manual are programmed by your security company. Your system might not include all of the functions described. Some functions require you to enter your personal passcode. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 9 – Sections 21 through 30. Covers how to use B92x/B91x keypads. – Section 31. Covers how to use D1260x/D1255x keypads (B9512G/ B8512G control panels only). – Section 32. Explains optional features and security system recommendations and limitations. Bosch Security Systems B.V.
Page 10 Text that appears in this manual in brackets [ ] instructs you to press the corresponding icon/key on your keypad. Copyright This document is the intellectual property of Bosch Security Systems, Inc. and is protected by copyright. All rights reserved. Trademarks All hardware and software product names used in this document are likely to be registered trademarks and must be treated accordingly.
Page 11: Keypads Overview
A1 Lobby A1 Lobby Ready to turn on Ready to turn on PREV ENTER NEXT PQRS WXYZ D1260x D1255x INSTANT DELAY RESET WATCH SPECIAL PARTIAL POLICE BYPASS COMMAND MENU PREV NEXT Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 12: Keypad Cleaning
Use a soft cloth and non-abrasive cleaning solution to clean your keypad (for example, microfiber cloth and eyeglass cleaner). Spray the cleaner onto the cloth. Do not spray directly onto the keypad. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 13: Points
These points often include interior forms of burglary detection devices, such as motion sensors or interior doors. When you turn your system All On, you turn on (arm) both part points and interior points. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 14: 24-Hour Points
Non-fire 24-hour points are always on (armed) and you cannot turn them off (disarm). Panic buttons, hold up buttons, low temperature sensors, and water sensors are examples of devices that are typically monitored by non-fire 24-hour points. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 15: Areas
With each section being its own area in your security system, you can turn them on (arm) and off (disarm) individually, in groups (office and laboratory, for example), or all together. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 16: Warning Displays And Tones
Failure to turn off your security system before the entry delay time expires might sound the burglary tone and could result in an alarm report being sent to your security company. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 17: Exit Delay Tone And Display
Invalid entry (error tone) The invalid entry tone follows the keypress tone when the keypress completes an invalid entry. Some entries require one keypress. Other entries require a series of two or more keypresses. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 18: How The System Reports Events
Consult with your installer to determine if your security system is configured with a cancel feature. If you silence a non-fire alarm before the alarm sound timer expires, your security systems sends a cancel report to your security company. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 19 A system that is configured for call waiting cannot report alarms correctly when call waiting is disabled. If you disable call waiting after your system has been configured for it, be sure to notify your security company. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 20: Alarm Events
The display shows the point text of the first point that went into fire alarm. Press /NEXT to manually show additional points (if any) that went into alarm. Events scroll from the oldest to the newest. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 21 Some fire points need to be reset. You cannot clear fire troubles from the display. When fire points return to normal, the security system automatically clears the fire troubles from the display. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 22: Gas Alarms
The Alarm Silenced message continues to scroll as a reminder that you can still view the text of the points in alarm by using the View Event Memory menu option. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 23: User And Burglary Alarms
To silence user and burglary alarms before the time expires, simply enter your personal passcode and press ENTER. Notice! For silent alarms, such as hold up alarms, no audible alarm sounds. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 24: Trouble Events
User and burglary trouble events The security company can program a keypad to emit the trouble tone (three tones followed by a pause repeated), when a user or burglary trouble event occurs. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 25: System Trouble Events
Service Battery Low. These displays appear on all keypads in the system. All system trouble displays begin with SERV or Service. The Service text clears only after the faulted condition is corrected. Press ENTER to silence the trouble tone. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 26: Cleared Events Are Not Lost
(armed). Turning the system on (arming) clears event memory. – Select the View Log menu to view all events in your system’s event log. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 27: View Faulted Or Bypassed Points
The keypad offers two ways of displaying faulted and bypassed point information. The first causes the faulted or bypassed point information to scroll automatically through the display. The second allows you to manually scroll through each individual point description. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 28 | View faulted or bypassed points Control Panels ￚNotesￚ 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 29: B94X Keypad Operation Overview
Control Panels B94x Keypad operation overview | en B94x Keypad operation overview Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 30: Main Display Area
My shortcuts are: ___________________________ ___________________________ ___________________________ ___________________________ 11.1 Main display area The keypad main display area has several screens that show based on the task performed at the keypad. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 31 (arm). Press the icon to turn on (arm) the security system. Not ready to arm. Indicates that the system is not ready to turn on (arm). Press the desired icon to resolve the faults. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 32 For example, the View faulted icon allows you to look at the list of faulted points. 11.1.2 Keypad screen The keypad screen shows when the keypad prompts you to enter your passcode or you press . 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 33 Backspace. Press to backspace to remove alphanumeric characters. 11.1.3 QWERTY keyboard screen The QWERTY keyboard screen shows when you can use alphanumeric characters, such as when entering the name for a new user. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 34 Extended Language keyboard. Press to show the non-English characters keyboard. Number/special character keyboard. Press to show the numbers and special characters keyboard. ABC keyboard. Press to show the English alphabet keyboard. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 35: Ribbon Bar Overview
Your security company programs these shortcuts for you. Menu. Press to open the Main Menu. Keypad. Press to replace the main display area with the keypad screen. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 36: Status Indicators Overview
(armed). – ON Steady. All areas are on with no alarms. – Flashing. All areas are armed, and there is an active alarm. – OFF. One or more areas are off. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 37: Feature Key
– OFF. There is no power to the control panel. 11.4 Feature key The Feature key performs a specific function programmed by your security company. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 38: B93X Keypad Operation Overview
Menu> PREV HELP NEXT PQRS WXYZ PQRS WXYZ Callout Description Number Alphanumeric display (refer to Display overview, page HELP key Softkeys PREV and NEXT keys CMD key (Command) ESC key (Escape) 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 39 The keypad has a Shortcuts menu to quickly access functions you use most. Your security company programmed these Shortcuts for you. To access Shortcuts using a B93x, press Shortcuts. My shortcuts are: ___________________________ ___________________________ ___________________________ ___________________________ Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 40: Keys Overview
Use the CMD (Command) key in combination with one or two number keys to perform functions. PREV and NEXT Use the PREV and NEXT keys to scroll through menus or menu selections. HELP 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 41 The HELP key has two uses. First, use the key to open the keypad’s on- display Help. (Press ESC to exit Help when finished.) Also, press and hold the HELP key for 2 seconds to change to the security system’s second language. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 42: Display Overview
The keypad has a bright two-line by 20-character liquid crystal display (LCD). When names are more than 18 characters, the text scrolls horizontally, similar to the way a stock ticker scrolls. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 43: Status Indicators Overview
Trouble. The yellow caution lights when a trouble condition exists. – ON Steady. There is a system, device, or point trouble. – OFF. There are no system, device, or point troubles. GAS. The blue GAS indicates a gas alarm. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 44 – Flashing. AC (mains) power to the control panel is not present and the control panel is operating from the battery. – OFF. There is no power to the control panel. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 45: B94X/B93X Menu Tree And Commands
You can type the number for the desired menu, if you know it. The menu tree figure on the next page shows the Menu structure and the numbers associated for each menu (B93x only). Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 46 Network Originate Turn Off Select Area Call Via Phone Go to Area Extend Close Bypass Firmware Points Bypass Unbypass Points Cycle Door Srv Bypass Unlock Door Access Lock Door Secure Door 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 47 Events Users View Event Set Date Memory Watch Clear Event Set Time Memory Date/Time Show Time View Log Set Date/ Time Format Schedule Brightness Volume Keypad Keypress Dflt Text Nightlight Presence Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 48 After you press CMD, you can use /PREV or /NEXT to move through the list of commands, and press ENTER when viewing the desired command. Review the available commands in the following table. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 49 Change Date and Time CMD 4 6* Door Control Menu CMD 4 7 Reset Sensors CMD 4 9* Change Display CMD 5 0 Go to Area CMD 5 1 Extend Close Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 50 CMD 6 Watch Mode CMD 7*~ Special Alert ___________________ CMD 8 Open Main menu CMD 9*~ Special Alert ___________________ *Requires firmware v3.0x or higher. B9512G/B8512G only. ~As configured by your security company. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 51: B94X/B93X On/Off Menu
Leave before the exit delay time expires. Leaving after exit delay expires causes entry delay to start. It may also cause an alarm on an interior device. Enter your passcode to turn off the system. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 52 6. Exit the area or enter your passcode again to stop the system from turning on. If you turn your system All On and don't exit, the system automatically switches to Part On. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 53 4. Press to All On Instant open the menu. 5. Enter your passcode and press ENTER. The keypad shows All On. 6. To turn off the security system, enter your passcode and press ENTER. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 54 4. Press All On Select Area to open the menu. 5. Enter your passcode and press ENTER . 6. Press either On Delay or On Instant. The keypad responds based upon your selection. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 55: Part On Menu
2. Press On/Off to open the menu. 3. Press Part On to open the menu. 4. Press Part On Delay to open the menu. 5. Enter your passcode and press ENTER. The keypad shows Part On Delay. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 56 2. Press On/Off to open the menu. 3. Press Part On to open the menu. 4. Press Part On Instant to open the menu. 5. Enter your passcode and press ENTER. The keypad shows Part On Instant. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 57 4. Press Part On Select Area to open the menu. 5. Enter your passcode and press ENTER. 6. Press either On Delay or On Instant. The keypad responds based upon your selection. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 58: Off Menu
Turning off the security system (disarm) with your passcode: 1. Enter your personal passcode. 2. Press ENTER within 8 sec of entering your passcode. The display returns to idle text. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 59 2. Press On/Off to open the menu. 3. Press Off to open the menu. 4. Press Turn Off to turn off. 5. Enter your passcode and press ENTER. The display returns to idle text. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 60 2. Press On/Off to open the menu. 3. Press [Off] to open the menu. 4. Press Turn Off Select Area to open the menu. 5. Enter your passcode and press ENTER. The display returns to idle text. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 61: Extend Closing
This time is the new beginning of the closing window. When you hear the warning, you can: Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 62 3. Press Extend Close to open the menu. 4. Enter your passcode and press ENTER. Notice! You cannot extend the window across the midnight boundary. The system cannot arm if points are off-normal. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 63: Bypass
2. Press On/Off to open the menu. 3. Press Bypass to open the menu. 4. Press Bypass Points to open the menu. 5. Select a point to bypass. 6. Escape from the menu. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 64 2. Press On/Off Menu to open the menu. 3. Press Bypass to open the menu. 4. Press Unbypass Points to open the menu. 5. Select a point to unbypass. 6. Escape from the menu. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 65: B94X/B93X Status Menu
3. Press View Area Status to open the menu. 4. Enter your passcode and press ENTER. The display shows the status of each area. For example A-1: Off. 5. Escape from the menu. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 66: View Point Status
5. The display shows the number of points in the system. Use PREV or /NEXT to scroll through the list of points and each point’s status. 6. Escape from the menu. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 67: Send Status Report
2. Press Status to open the menu. 3. Press Send Status Report to open the menu. 4. Enter your passcode and press ENTER. The control panel sends a report to your security company. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 68: B94X/B93X Actions Menu
Check to be certain that there is no smoke, fire, or other danger present. If you cannot reset the detector or sensor, contact your security company. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 69: Outputs
4. Enter your passcode and press ENTER. 5. Use /NEXT to select the desired output value, or use the number keys to enter the value. 6. Press Turn On or Turn Off. 7. Escape from the menu. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 70: Test
Keypads within the area’s scope from which you did not initiate the walk test show Walk test in progress during the testing. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 71 8. Escape from the menu. Automatic termination The Walk Test automatically ends after 20 minutes of no test activity. The keypad sounds during the last 5 minutes of the test. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 72 2. Press Actions to open the menu. 3. Press Test to open the menu. 4. Press Test Report to open the menu. 5. Press Custom Test. 6. Select the route group you want to test. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 73 B94x/B93x Actions menu | en 7. Select the destination you want to test. 8. Enter your passcode and press ENTER. The system sends a custom test report. 9. Escape from the menu. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 74 3. Press Test to open the menu. 4. Press Revisions to open the menu. 5. Enter your passcode and press ENTER. The current revision information shows on the display. 6. Escape from the menu. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 75: Rps
Using the Answer menu option to answer an incoming call from RPS: 1. Open the Main Menu. 2. Press Actions to open the menu. 3. Press RPS to open the menu. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 76 | B94x/B93x Actions menu Control Panels 4. Press Answer to open the menu. 5. Enter your passcode and press ENTER. The keypad shows RPS is connecting…. and then returns to idle text. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 77 5. To use the programmed port number, press Configured Port. The connection progress begins. 6. If you wish to change the port number before connecting, press Change Port. Press ENTER. The connection progress begins. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 78 2. Press Actions to open the menu. 3. Press RPS to open the menu. 4. Press Call Via Phone to open the menu. 5. Enter your passcode, press ENTER. The connection progress begins. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 79: Go To Area
3. Press Go to Area to open the menu. 4. Enter your passcode and press ENTER. 5. Use /NEXT to go to the area you wish to enter, and then press Go to Area. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 80: Firmware
Local authorization is required for UL listed systems. Authorizing a firmware update: 1. Open the Main Menu. 2. Press Actions to open the menu. 3. Press Firmware to open the menu. 4. Enter your passcode and press ENTER. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 81: Service Bypass
Viewing points in Service Bypass: 1. Open the Main Menu. 2. Press Actions to open the menu. 3. Press Srv Bypass to open the menu. The keypad shows any points in service bypass. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 82: Access Menu
The door is in a failed state. Call your security company. Locked The door is locked (door can be opened by presenting a valid credential). This feature is: available on my system. unavailable on my system. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 83 5. Enter your passcode and press ENTER. 6. Use PREV or NEXT to scroll to the desired door. The keypad shows the door status. 7. Press ENTER. The door cycles. 8. Escape from the menu. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 84 5. Enter your passcode and press ENTER . 6. Use PREV or NEXT to scroll to the desired door. The keypad shows the door status. 7. Press ENTER. The door unlocks. 8. Escape from the menu. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 85 5. Enter your passcode and press ENTER. 6. Use PREV or NEXT to scroll to the desired door. The keypad shows the door status. 7. Press ENTER. The door locks. 8. Escape from the menu. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 86 5. Enter your passcode and press the ENTER. 6. Use PREV or NEXT to scroll to the desired door. The keypad shows the door status. 7. Press ENTER. The door secures. 8. Escape from the menu. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 87: B94X/B93X Users Menu
2 of an existing passcode. For example, if 1234 is an existing code, your security system does not let you change your code to 1232, 1233, 1234, 1235, or 1236. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 88 2. Press Users. Press Change Passcode to open the menu. 3. Enter your current passcode and press ENTER. 4. Enter your new passcode and press ENTER. 5. Enter your new passcode again and press ENTER. 6. Escape from the menu. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 89: Add User
The area number identifies which parts of your security system the passcode can access. Contact your security company if you don’t know what user numbers, authority levels, or areas are available. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 90 1232, 1233, 1235, or 1236. – Choose an authority level for each area. Leaving the authority level for an area blank by pressing ENTER without making an entry, denies the passcode access to that area. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 91 CMD before you enter the letter. For caps lock, press CMDCMD. To remove caps lock, press CMDCMDCMD. 3. Press ENTER to save the name. The keypad returns to the previous menu. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 92 ENTER. The keypad shows Level configured and returns to the previous menu. 5. If your security system has more than one area, use NEXT and the previous two steps to set the levels for the additional areas. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 93 Replace and then Replace, and follow the previous step. 10. You can remove the added keyfob or transmitter by pressing Remove. 11. Escape from the menu. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 94 Enabling and disabling for mobile app connectivity for the user: 1. Press [Mobile App] to enable or disable mobile app access. 2. Press ENTER to continue. The current state (enabled/disabled) shows. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 95 Control Panels B94x/B93x Users menu | en 3. Press [Enable] or [Disable] to change the setting. The keypad indicates the new configuration and then returns to the previous menu. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 96: Edit User
2. Press ENTER to continue. 3. Enter the user’s passcode and press ENTER. 4. Enter the passcode again and press ENTER. The keypad shows Passcode changed and then returns to the previous menu. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 97 ENTER. The keypad shows Level configured and returns to the previous menu. 5. If your security system has more than one area, use NEXT and the previous two steps to set the levels for the additional areas. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 98 4. If the reader identifies the card correctly, the keypad shows Card configured. 5. Escape from the menu. Selecting a keypad display language for the user: 1. Press Language to select the user’s language. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 99 2. Press ENTER to continue. The current state (enabled/disabled) shows. 3. Press [Enable] or [Disable] to change the setting. The keypad indicates the new configuration and then returns to the previous menu. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 100: Delete User
6. Press Continue. 7. Press Yes to confirm you wish to delete the selected user. The keypad shows User ## deleted, and then returns to the previous menu. 8. Escape from the menu. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 101: B94X/B93X Settings Menu
Use this function in residential systems to monitor entries or exits in your home. In commercial systems it can serve as a door chime to alert you when a customer or delivery person enters your business. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 102 3. Press Watch to open the menu. 4. Enter your passcode and press ENTER. 5. Press Turn On or Turn Off. The keypad indicates that you enabled or disabled Watch Mode successfully. 6. Escape from the menu. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 103: Date/Time
11. For B93x keypads in 12 hour format, press AM or PM. 12. Press Save/ENTER to save the change. The keypad shows Time change complete and then returns to the previous menu. 13. Escape from the menu. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 104: Schedule (Skeds)
/NEXT to scroll through the list of SKEDs. The keypad indicates whether a SKED is enabled, disabled, or not yet programmed. 6. Continue to Enabling a disabled SKED or Disabling a enabled SKED. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 105 1. With the SKED you wish to disable showing, press Disable the sked. 2. Press ENTER to disable the SKED. The keypad display indicates that the SKED is disabled. 3. Escape from the menu. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 106: Keypad
3. Press Keypad to open the menu. 4. Press Brightness to open the menu. 5. Use /PREV or /NEXT to adjust the brightness level. The changes apply immediately. 6. Escape from the menu. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 107 3. Press Keypad to open the menu . 4. Press Volume to open the menu. 5. Use /PREV or /NEXT to adjust the volume level. The changes apply immediately. 6. Escape from the menu. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 108 2. Press Settings to open the menu. 3. Press Keypad to open the menu. 4. Press Keypress to open the menu. 5. Press Turn On or Turn Off. 6. Escape from the menu. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 109 2. Press Settings to open the menu. 3. Press Keypad to open the menu. 4. Press Nightlight to open the menu. 5. Press Turn On or Turn Off. 6. Escape from the menu. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 110 2. Press Settings to open the menu. 3. Press Keypad to open the menu. 4. Press Presence to open the menu. 5. Press Turn On or Turn Off. 6. Escape from the menu. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 111: B94X/B93X Shortcuts Menu
Shortcuts while viewing idle text. 2. Press the softkey for the desired Shortcut. If more than four Shortcuts are available, the NEXT key lights, and you can use the key to view additional Shortcuts. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 112: B94X/B93X Events Menu
Each time you turn the security system on, the event memory is erased. Viewing event memory: 1. Open the Main Menu. 2. Press Events to open the menu. 3. Press View Event Memory to open the menu. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 113: Clear Event Memory
Clearing event memory: 1. Open the Main Menu. 2. Press Events to open the menu. 3. Press Clear event memory to open the menu. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 114: View Log
To view the entire log from the newest event, press Go to last event without entering a start date. The date and time of the newest event shows. Use /PREV or /NEXT to move through the events. 4. Escape from the menu. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 115 Control Panels B94x/B93x Events menu | en -Notes- Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 116: B92X Keypad Operation Overview
Ready to turn on Callout Description Number Alphanumeric display (refer to Display overview, page 120) PREV and NEXT keys ENTER key ALL, PART, and BYPASS keys MENU key CMD key (Command) 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 117 The keypad has a Shortcuts menu to quickly access functions you use most. Your security company programmed these Shortcuts for you. To access Shortcuts, press MENU, and then press [6]. My shortcuts are: ___________________________ ___________________________ ___________________________ ___________________________ Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 118: Keys Overview
Part On. Use the BYPASS key to access the menu to bypass points. ENTER Use the BYPASS key to complete the entry of your passcode other numbers, or to answer Yes to a keypad request. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 119 Use the CMD (Command) key in combination with one or two number keys to perform functions. PREV and NEXT Use the PREV and NEXT keys to scroll through menus or menu selections. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 120: Display Overview
The keypad uses words, numbers, and symbols to show the status of the security system. When several events occur, the keypad shows each event in order of priority. The keypad has a bright two-line liquid crystal display (LCD). 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 121: Status Indicators Overview
Trouble. The yellow caution lights when a trouble condition exists. – ON Steady. There is a system, device, or point trouble. – OFF. There are no system, device, or point troubles. GAS. The blue GAS indicates a gas alarm. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 122 – Flashing. AC (mains) power to the control panel is not present and the control panel is operating from the battery. – OFF. There is no power to the control panel. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 123: B91X Keypad Operation Overview
Control Panels B91x Keypad operation overview | en B91x Keypad operation overview A1 Lobby Ready to turn on PREV ( ) ENTER (▬) NEXT ( ) ESC ( ) CMD (#) Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 124 To access the main menu, press CMD[8]. Press PREV or NEXT to scroll through the list of functions programmed by your security company. To initiate the function shown on the display, press ENTER or press the 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 125: Keys Overview
Also, use the key as a backspace when you enter names and numbers. Use the CMD (Command) key in combination with one or two number keys to perform functions. PREV and NEXT Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 126: Display Overview
The keypad has a bright two-line liquid crystal display (LCD). 22.3 Status indicators overview The Status indicators on keypads provide a quick visual reference for you to see how your system is operating. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 127 ON Steady. There is a system, device, or point trouble. – OFF. There are no system, device, or point troubles. All On status. – Green. Ready to turn All On. – Red. All On (all armed). Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 128: B92X/B91X Menu Tree
ENTER when you see the desired menu option. The menu tree figure on the next page shows the menu structure and the numbers associated for each menu option. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 129 Close Time 6: Update Firmware 1: Bypass Points 5: Bypass 1: Cycle Door 7: View Serv 2: Unbypass Bypassed Points 2: Unlock Door 8: Access 3: Lock Door 4: Secure Door Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 130 2: Adjust 4: Config Volume Keypad 3: Silence Keytone 5: Default 4: Set Text Nightlight Commands You can initiate functions with the CMD key plus the one or two digit command. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 131 After you press CMD, you can use /PREV or /NEXT to move through the list of commands, and press ENTER when viewing the desired command. Review the available commands in the following table. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 132 Change Date and Time CMD 4 6* Door Control Menu CMD 4 7 Reset Sensors CMD 4 9* Change Display CMD 5 0 Go to Area CMD 5 1 Extend Close 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 133 CMD 6 Watch Mode CMD 7*~ Special Alert ___________________ CMD 8 Open Main menu CMD 9*~ Special Alert ___________________ *Requires firmware v3.0x or higher. B9512G/B8512G only. ~As configured by your security company. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 134: B92X/B91X On/Off Menu
Use the All On menu to turn areas All On. Turning an area All On means to turn on (arm) all the points in that area, for example, all doors and all windows and all motion sensors. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 135 6. Exit the area or enter your passcode to stop the system from turning on. If you turn your system All On and don't exit, the system automatically switches to Part On. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 136 4. Use NEXT to go to the All On Instant option, and press ENTER, or simply press [2]. The keypad shows All On. 5. To turn off the security system, enter your passcode and press ENTER. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 137 4. Use NEXT to go to the All On Select menu, and press ENTER, or simply press [3]. 5. Use NEXT and ENTER to select either the On Instant or On Delay option. The keypad responds based upon your selection. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 138: Part On Menu
When the area is Part On Instant, faulting a Part On point (opening a door for example) creates an alarm event immediately. Turning the system Part On without delay: 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 139 4. Use NEXT to go to the Part On Instant option, and press ENTER, or press [2]. 5. Enter your passcode and press ENTER. The keypad shows Part On Inst. 6. To turn off the system, enter your passcode and press ENTER. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 140 4. Use NEXT to go to the menu Part On Select menu, and press ENTER, or press [3]. 5. Use NEXT and ENTER to select either the On Instant or On Delay option. The keypad responds based upon your selection. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 141: Off Menu
You can use the Turn Off menu to turn off all areas in which you have authority. Turning off areas: 1. Open the Main Menu. 2. Press [1] or ENTER to open the On/Off menu. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 142 4. Use NEXT to go to the menu Turn Off Select menu, and press ENTER, or simply press [2]. 5. Use NEXT and ENTER to select an area. 6. Press ENTER to turn off your selected area. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 143: Extend Closing
This time is the new beginning of the closing window. When you hear the warning, you can: Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 144 3. Use NEXT to go to the Extend Closing menu, and press ENTER, or simply press [4]. 4. Enter your passcode and press ENTER. Notice! You cannot extend the window across the midnight boundary. The system cannot arm if points are off-normal. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 145: Bypass Menu
3. Use NEXT to go to the Bypass menu, and press ENTER, or simply press [5]. 4. Press [1] or ENTER to open the Bypass Points menu. 5. Select a point to bypass. 6. Press ESC to exit the menu. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 146 4. Use NEXT to go to the Unbypass menu, and press ENTER, or simply press [2]. 5. Enter your passcode and press ENTER. 6. Select a point to bypass. 7. Press ESC to exit the menu. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 147: B92X/B91X Status Menu
3. Press [1] or ENTER to open the View Area Status menu. 4. Enter your passcode and press ENTER. The display shows the status of each area. For example A1: Off. 5. Press ESC to exit the menu. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 148: View Point Status
4. The display shows the number of points in the system. Use PREV or NEXT to scroll through the list of points and each point’s status. 5. Press ESC to exit the menu. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 149: Send Status Report
3. Use NEXT to go to the Send Status Report menu option, and press ENTER, or simply press [3]. 4. Enter your passcode and press ENTER. The control panel sends a status report to your security company. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 150: B92X/B91X Actions Menu
Check to be certain that there is no smoke, fire, or other danger present. If you cannot reset the detector or sensor, contact your security company. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 151: Outputs
6. Press ENTER The current state of the output shows. 7. Use ENTER to toggle between Off and On. 8. Press ESC to exit the menu. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 152: Test
Keypads within the area’s scope from which you did not initiate the walk test show Walk test in progress during the testing. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 153 9. Press ESC to exit the menu. Automatic termination The Walk Test automatically ends after 20 minutes of no test activity. The keypad sounds during the last 5 minutes of the test. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 154 7. Press ESC to exit the menu Sending a custom test report: 1. Open the Main Menu. 2. Use NEXT to go to the Actions menu option, and press ENTER, or press [3]. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 155 7. Select the destination you want to test or select all destinations. 8. Enter your passcode and press ENTER. The system sends a custom test report. 9. Press ESC to exit the menu Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 156 4. Use NEXT to go to the Revisions menu option, and press ENTER, or simply press [3]. The current control panel revision information shows on the display. 5. Press ESC to exit the menu. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 157 ENTER, or simply press [4]. The keypad shows the first destination. 5. Use NEXT to go to the desired destination, and then press ENTER. The control panel sends a test notification, and then returns to idle text. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 158: Rps
4. Press [1] or ENTER to reset the sensors with the Answer option. 5. Enter your passcode and press ENTER. The keypad shows RPS is connecting…. and then returns to idle text. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 159 NEXT and then ENTER, or simply press [2]. The ESC key acts as a backspace key. Press ESC to delete the characters, and then enter the new characters. Press ENTER. The connection process begins. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 160 [4]. 4. Use NEXT to go to the Call Via Phone menu option, and press ENTER, or simply press [3]. 5. Enter your passcode and press ENTER. The connection process begins. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 161: Go To Area
3. Use NEXT to go to the Go to Area menu option, and press ENTER, or simply press [5]. 4. Enter your passcode and press ENTER. 5. Use NEXT to go to the area you wish to enter, and then press ENTER. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 162: Firmware
2. Use NEXT to go to the Actions menu option, and press ENTER, or simply press [3]. 3. Use NEXT to go to the Firmware menu option, and ENTER, or simply press [6]. 4. Enter your passcode and press ENTER. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 163: Service Bypass
3. Use NEXT to go to the Service Bypass menu option, and press ENTER, or simply press [6]. 4. Enter your passcode and press ENTER. The keypad shows any points in service bypass. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 164: Access Menu
The door is in a failed state. Call your security company. Locked The door is locked (door can be opened by presenting a valid credential). This feature is: available on my system. unavailable on my system. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 165 6. Use PREV or NEXT to scroll to the desired door. The keypad shows the door status. 7. To cycle the door, press ENTER. The door cycles. 8. Escape from the menu. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 166 5. Enter your passcode and press ENTER. 6. Use PREV or NEXT to scroll to the desired door. The keypad shows the door status. 7. Press ENTER. The door unlocks. 8. Escape from the menu. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 167 5. Enter your passcode and press ENTER. 6. Use PREV or NEXT to scroll to the desired door. The keypad shows the door status. 7. Press ENTER. The door locks. 8. Escape from the menu. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 168 5. Enter your passcode and press ENTER. 6. Use PREV or NEXT to scroll to the desired door. The keypad shows the door status. 7. Press ENTER. The door secures. 8. Escape from the menu.. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 169: B92X/B91X Users Menu
2 of an existing passcode. For example, if 1234 is an existing code, your security system does not let you change your code to 1232, 1233, 1234, 1235, or 1236. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 170 5. Enter your new passcode and press ENTER. 6. Enter your new passcode again and press ENTER. The keypad shows Passcode changed and then returns to the Change Passcode option. 7. Press ESC to exit the menu. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 171: Add User
The area number identifies which parts of your security system the passcode can access. Contact your security company if you don’t know what user numbers, authority levels, or areas are available. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 172 1232, 1233, 1235, or 1236. – Choose an authority level for each area. Leaving the authority level for an area blank by pressing ENTER without making an entry, denies the passcode access to that area. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 173 2. Press ENTER to configure the user’s passcode. 3. Enter the user’s passcode and press ENTER. 4. Enter the passcode again and press ENTER. The keypad shows Passcode changed and then returns to the previous menu. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 174 ENTER. The keypad shows Level configured and returns to the previous menu. 4. If your security system has more than one area, use NEXT and the previous two steps to set the levels for the additional areas. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 175 Configuring a card for a user: 1. Use NEXT to go to the Configure Card option, and press ENTER, or simply press [5]. 2. Press ENTER to continue. The keypad shows Present card. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 176 ENTER, or simply press [7]. 2. Press ENTER to continue. The current state (enabled/disabled) shows. 3. Press ENTER to change the setting. The keypad indicates the new configuration, and then returns to the previous menu. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 177: Edit User
3. The ESC key acts as a backspace key. Press ESC to delete the characters. Press a number key repeatedly to scroll through the number and letters shown on the key. To enter a space, press [0] Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 178 ENTER. The keypad shows Level configured and returns to the previous menu. 4. If your security system has more than one area, use NEXT and the previous two steps to set the levels for the additional areas. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 179 Adding or replacing a card for the user: 1. Use NEXT to go to the Configure Card option, and press ENTER, or simply press [5]. 2. Press ENTER to continue. The keypad shows Present card. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 180 ENTER, or simply press [7]. 2. Press ENTER to continue. The current state (enabled/disabled) shows. 3. Press ENTER to change the setting. The keypad indicates the new configuration, and then returns to the previous menu. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 181: Delete User
7. Press ENTER to confirm you wish to delete the selected user. The keypad shows User ## deleted, and then returns to the previous menu. 8. Press ESC to exit the menu. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 182: B92X/B91X Settings Menu
Use this function in residential systems to monitor entries or exits in your home. In commercial systems it can serve as a door chime to alert you when a customer or delivery person enters your business. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 183 5. Press ENTER to turn Watch Mode on if it is off, or off if it is on. The keypad display indicates that you enabled or disabled Watch Mode successfully. 6. Press ESC to exit the menu. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 184: Date/Time
9. Enter the new time in the selected format. If you make a mistake, the ESC key acts as a backspace key. Press ESC to delete the characters and then enter the new numbers. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 185 For 12 hour format systems, the keypad shows the AM or PM selection option. Follow the prompts to select a format and return to the previous menu. 11. Press ESC to exit the menu. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 186: Schedule (Skeds)
SKED is enabled, disabled, or not yet programmed. 6. With the SKED you wish to enable showing, press ENTER. 7. Continue to Enabling a disabled SKED or Disabling a enabled SKED. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 187: Press Esc To Exit The Menu
1. With the SKED you wish to enable showing, press ENTER. 2. Press ENTER.to continue disable it. The keypad display indicates that the SKED is disabled. 3. Press ESC to exit the menu. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 188: Keypad
[4]. 4. Press [1] or ENTER to adjust the brightness. 5. Press PREV or NEXT to adjust the brightness level. The changes apply immediately. 6. Press ESC to exit the menu. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 189 4. Use NEXT to go to the Volume menu option, and press ENTER, or simply press [2]. 5. Press PREV or NEXT to adjust the volume level. The changes apply immediately. 6. Press ESC to exit the menu. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 190 4. Use NEXT to go to the Press 4 to Set Nightlight option, or simply press [4]. 5. Use PREV or NEXT to toggle between the Yes and No options. 6. Press ENTER while viewing the desired option to save the programming. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 191 Control Panels B92x/B91x Settings menu | en 7. Press ESC to exit the menu. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 192: B92X/B91X Shortcuts Menu
2. Use NEXT to go to the Shortcuts menu option, and press ENTER, or simply press [6]. 3. Use PREV or NEXT to go to the Shortcut you wish to run, and then press ENTER. The shortcut runs. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 193: B92X/B91X Events Menu
1. Open the Main Menu. 2. Use NEXT to go to the Events menu option, and press ENTER, or simply press [7]. 3. Press [1] or ENTER to open the view event memory. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 194: Clear Event Memory
2. Use NEXT to go to the Events menu option, and press ENTER, or simply press [7]. 3. Use NEXT to go to the Clear Event Memory menu option, and press ENTER, or simply press [2]. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 195: View Log
Use PREV or NEXT to move through the events. If an event description is longer than the display, the event description scrolls horizontally. 4. Press ESC to exit the menu. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 196: D1260/D1255 Keypads
| D1260/D1255 keypads Control Panels D1260/D1255 keypads Only the B9512G/B8512G control panels support the D1260 and D1255 Series keypads. 31.1 D1260 Series keypad overview Area 1 A1 Lobby Ready to turn on <Shortcuts Menu> Callout Description Number Alphanumeric display Softkeys 2019.06 | 07 | F.01U.307.371...
Page 197: D1255 Series Keypad Overview
Control Panels D1260/D1255 keypads | en Callout Description Number ENTER CMD key (Command) 31.2 D1255 Series keypad overview INSTANT DELAY RESET WATCH SPECIAL PARTIAL POLICE BYPASS COMMAND MENU PREV NEXT Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 198: Operation Overview
The listed sections explain the steps leading up to and including opening the menu you open by using the command. Follow the instructions as they apply to the commands. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 199 Delete User, page Delete User, page CMD 5 5 Change Change Passcode, Change Passcode, Passcode page 87 page 169 CMD 5 6 Add User Add User, page 89 Add User, page 171 Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 200 Watch Mode, page Mode Notice! On these models of keypad, CMD 5 6 only adds the user and passcode; it does not support configuring user name, authority level, keyfob, and tokens, and cards. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 201: Options
1. Enter the first passcode and press ENTER. The keypad shows a request for the second passcode. 2. Enter a second passcode and press ENTER. The second passcode must be different from the first passcode. The area turns off. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 202: Early Ambush
You can enter the passcodes at the same keypad, or at different keypads (if keypads are assigned to the same area). Early Ambush is: enabled on my system. disabled on my system. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 203 3. Enter a second passcode and press ENTER. The keypad shows Code 2 Validated to confirm that the security system accepted the second passcode and stopped the Early Ambush time countdown. The system does not create a duress event. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 204: Security System Limitations
Inadequate maintenance and failure to test are the most common causes of alarm failure. Testing the system once a week is strongly recommended to ensure all system components are working properly. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 205 Although having a security system might make you eligible for reduced insurance premiums, the security system is no substitute for insurance. Warning devices cannot compensate you for loss of life or property. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 206: Cross Points
A second alarm on the first point does not create an alarm event, but rather an unverified event. Cross points are: enabled on my system. disabled on my system. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 207: Fire Safety And Evacuation
– Practice using different ways out. – Teach children how to escape on their own in case you can’t help them. – Close doors behind you as you leave. Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 208 – If you have to escape through smoke, get low and go under the smoke to your way out. – Call the fire department from outside your home. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 209: Multiple Area Systems
Example Your security system protects a business configured for three areas (the office, the warehouse, and shipping), and three users (1, 2, and 3). Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 210 What does this mean for the three users in the example? Specifically, which areas turn on when the user turns the system All On from each keypad? 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 211 Result of turning the system All On? No area turns on. User 1 at the shipping keypad Action Area affected Reason Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 212 User’s authority is limited to protected the office area, which is not functions? within the warehouse or shipping keypad’s scope Result of turning the system All On? No area turns on. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 213 Result of turning the system All On? Only the warehouse area turns on. User 2 at the shipping keypad Action Area affected Reason Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 214 User’s authority level and the protected shipping keypad’s scope include both functions? the warehouse and shipping Result of turning the system All On? Only the warehouse and shipping areas turn on. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 215 Result of turning the system All On? Only the warehouse area turns on. User 3 at the shipping keypad Action Area affected Reason View status? Warehouse and Keypad’s scope includes both shipping the warehouse and shipping areas Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 216 User’s authority level and the protected shipping keypad’s scope include both functions? the warehouse and shipping Result of turning the system All On? Only the warehouse and shipping areas turn on. 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 217: Glossary
A programmed delay of A point that is not normal system alarm response (a door or window is allowing an individual to open). enter an armed area through the correct point Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 218 A detection device connected to the security system. Points show on the keypad individually and with custom text. The text might describe a single door, motion sensor, smoke detector, 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 219 Control Panels Glossary | Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371...
Page 220 | Glossary Control Panels 2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Page 224 Bosch Security Systems B.V. Torenallee 49 5617 BA Eindhoven Netherlands www.boschsecurity.com © Bosch Security Systems B.V., 2019...

This manual is also suitable for:

B9512g B6512 B5512 B4512 B3512

Bosch B8512G Operation Manual

Quick Links

Related Manuals for Bosch B8512G

Summary of Contents for Bosch B8512G

This manual is also suitable for:

Table of Contents