Ipv4 Default Gateway; Ipv4 Dns Server Ip Address; Ipv6 Dns Server Ip Address; Upnp (Universal Plug And Play) Enable - Bosch B9512G Program Entry Manual
Security system
Hide thumbs
Also See for B9512G:
- Owner's manual (228 pages) ,
- Installation and system reference manual (186 pages) ,
- Installation manual (47 pages)
Table of Contents
Advertisement
242 en | SDI2 modules
14.4.6
IPv4 Default Gateway
Default: 0.0.0.0
Selections: 0.0.0.0 to 255.255.255.255
This parameter sets the address for the local network gateway to the internet or intranet.
If the IPv4 DHCP/Auto IP Enable parameter is set to Yes, this parameter is grayed out (you do
not have access to it).
If the IPv4 DHCP/Auto IP Enable parameter is set to No, enter the Default Gateway address
here.
A gateway is an address on a TCP/IP network that serves as an entrance to another network. A
host uses a default gateway when an IP packet's destination is outside the local subnet. The
default gateway address is usually an interface belonging to a LAN's border router.
Further information
IP Address and Domain Name formats, page 282
The parameter has no effect on B450 Plug-in Communicator Interface operation.
RPS Menu Location
SDI2 > B42x IP Communicator > IPv4 default gateway
14.4.7
IPv4 DNS Server IP Address
Default: 0.0.0.0
Selections: 0.0.0.0 to 255.255.255.255
This parameter sets the IPv4 DNS server address in Static IP mode.
A Domain Name Server (DNS) converts internet domain names or hostnames to their
corresponding IP addresses. In DHCP mode, the DHCP server's default DNS is used. To use a
custom DNS server in DHCP mode, change this parameter to the custom DNS server's IP
address.
Further information
IP Address and Domain Name formats, page 282
RPS Menu Location
SDI2 > B42x IP Communicator > IPv4 DNS server IP address
14.4.8
IPv6 DNS Server IP Address
Default: ::
Selections: 0000:0000:0000:0000:0000:0000:0000:0000 to
FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF
This parameter configures the IPv6 DNS server address in Static IP mode.
A Domain Name Server (DNS) converts internet domain names or hostnames to their
corresponding IP addresses. In DHCP mode, the DHCP server's default DNS is used. To use a
custom DNS server in DHCP mode, change the parameter to the custom DNS server's IP
address.
When this address is set by the DHCP service, do not change it.
This IPv6 DNS server address is the only IPv6 address entered as numbers.
Further information
IP Address and Domain Name formats, page 282
RPS Menu Location
SDI2 > B42x IP Communicator > IPv6 DNS server IP address
14.4.9
UPnP (Universal Plug and Play) Enable
Default: Yes
Selections:
2017.03 | 09 | F.01U.303.998
Program Entry Guide
Control Panel
Bosch Security Systems, Inc.
- Quick Links:
- User Command
- Remote Programming Software
Hide quick links:
Advertisement
Table of Contents
