Camera; Installer Menu; Positioning - Bosch MIC-7130-PB4 Operation Manual
Hide thumbs
Also See for MIC-7130-PB4:
- Quick installation manual (45 pages) ,
- Operation manual (112 pages)
Table of Contents
Advertisement
50
en | Camera
16
Camera
16.1
Installer Menu
Application Variant
–
–
–
Base frame rate
This option allows you to set the frame rate that the camera uses to transmit video. Select
either 50 fps or 60 fps. If you select 50 fps, the camera will stream video at 25 or 50 fps. If you
select 60 fps, the camera will stream video at 30 or 60 fps, depending on the option selected
in the field Max. frame rate in the menu Encoder Streams.
Notice!
Changing the field Base frame rate
A change to the parameter in the field Base frame rate requires approximately 10-20 seconds
to complete. During this time, no changes can be made. The cameo image freezes.
The orientation of the camera. Options: Normal, Inverted, Canted.
SC settings
Click the Default button to restore all camera settings to their original defaults.
Reboot device
Click the Reboot button to reboot the camera. There is a ten (10) second pause before the
camera starts its homing phase. During the homing phase, the camera will complete finding
the upper and lower tilt limits.
Factory defaults
Click the Defaults button to restore the configuration settings defined in the camera's web
server to their default values. A confirmation screen appears. Allow 5 seconds for the camera
to optimize the picture after a mode reset.
16.1.1
Positioning
Coordinate system
Select the appropriation option. Enter the appropriate additional values in the additional input
fields that appear depending on the options selected. Refer to the following table.
Option
Not set
Cartesian
WGS 84
2016.07 | 5.0 | F.01U.291.520
If you are connecting to MIC-ALM-WAS-24, select "[camera name] - IO" to allow the
camera to recognize additional inputs and outputs from this device.
If you are connecting to VJC-7000-90, select "[camera name] – VJC-7000" to allow the
camera to recognize additional inputs and outputs from this device.
Otherwise, select "[camera name]."
Additional Input field
X [m]
Y [m]
Z [m]
Azimuth [°]
Latitude
Longitude
Ground level [m]
Azimuth [°]
Operation Manual
MIC IP starlight 7000 HD
Bosch Security Systems
- Quick Links:
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
