hit counter script
Bosch Starlight 7000 HD Operation Manual
  1. Manuals
  2. Brands
  3. Bosch Manuals
  4. Security Camera
  5. DINION IP starlight 7000 HD
  6. Operation manual

Bosch Starlight 7000 HD Operation Manual

Mic ip starlight 7000 hd / mic ip dynamic 7000 hd series
Hide thumbs Also See for Starlight 7000 HD:
Table of Contents

Advertisement

Quick Links

See also: User Manual , Installation Manual
MIC IP starlight 7000 HD, MIC IP dynamic
7000 HD
MIC-71xx, MIC-72xx
en
Operation Manual

Advertisement

Table of Contents
loading

Related Manuals for Bosch Starlight 7000 HD

Summary of Contents for Bosch Starlight 7000 HD

  • Page 1 MIC IP starlight 7000 HD, MIC IP dynamic 7000 HD MIC-71xx, MIC-72xx Operation Manual...

  • Page 3: Table Of Contents

    MIC IP starlight 7000 HD, MIC IP Table of Contents | en dynamic 7000 HD Table of contents Safety About this Manual Legal Information Safety Precautions Important Safety Instructions Important Notices Important Notices - Illumination Safety Customer Support and Service...
  • Page 4 MIC IP starlight 7000 HD, MIC IP en | Table of Contents dynamic 7000 HD Configuration via IP, Advanced Mode 15.1 Advanced Mode: General 15.2 Identification 15.3 Password 15.4 Date/Time 15.5 Display Stamping 15.6 Advanced Mode: Web Interface 15.7 Appearance 15.8...
  • Page 5 MIC IP starlight 7000 HD, MIC IP Table of Contents | en dynamic 7000 HD 15.49 IPv4 Filter 15.50 Encryption 15.51 Advanced Mode: Service 15.52 Maintenance 15.53 Licenses 15.54 Diagnostics 15.55 System Overview Operation 16.1 LIVE Page 16.1.1 View Control 16.1.2...

  • Page 6: Safety

    Legal Information Copyright This manual is the intellectual property of Bosch Security Systems, Inc. and is protected by copyright. All rights reserved. Trademarks All hardware and software product names used in this document are likely to be registered trademarks and must be treated accordingly.
  • Page 7 Use common-sense safety precautions, especially in situations where there could be risk of injury if any part of the assembly becomes detached and falls. Bosch recommends using the hinged DCA, which allows installers to “hang” the MIC camera temporarily on the DCA to make electrical connections, before bolting the camera to the DCA.

  • Page 8: Important Notices

    Camera signal - Protect the cable with a primary protector if the camera signal is beyond 140 feet, in accordance with NEC800 (CEC Section 60). Environmental statement - Bosch has a strong commitment towards the environment. This unit has been designed to respect the environment as much as possible.
  • Page 9 MIC IP starlight 7000 HD, MIC IP Safety | en dynamic 7000 HD Permanently connected equipment - Incorporate a readily accessible disconnect device in the building installation wiring. Power lines - Do not locate the camera near overhead power lines, power circuits, or electrical lights, nor where it may contact such power lines, circuits, or lights.
  • Page 10 MIC IP starlight 7000 HD, MIC IP en | Safety dynamic 7000 HD Informations FCC et ICES (modèles utilisés aux États-Unis et au Canada uniquement) Ce produit est conforme aux normes FCC partie 15. la mise en service est soumises aux deux conditions suivantes : –...

  • Page 11: Important Notices - Illumination Safety

    MIC IP starlight 7000 HD, MIC IP Safety | en dynamic 7000 HD Important Notices - Illumination Safety The text in this section applies only to cameras which have the optional illuminator accessory. Notice! This product has been tested according to standard IEC62471:2006 “Photobiological safety of lamps and lamp systems”.

  • Page 12: Customer Support And Service

    MIC IP starlight 7000 HD, MIC IP en | Safety dynamic 7000 HD Customer Support and Service If this unit needs service, contact the nearest Bosch Security Systems Service Center for authorization to return and shipping instructions. Service Centers Telephone: 800-366-2283 or 585-340-4162 Fax: 800-366-1329 Email: cctv.repair@us.bosch.com...

  • Page 13: Unpacking

    Verify that all the parts listed in the Parts List below are included. If any items are missing, notify your Bosch Security Systems Sales or Customer Service Representative. – Do not use this product if any component appears to be damaged. Please contact Bosch Security Systems in the event of damaged goods. –...

  • Page 14: Product Description

    720p50/60 or 1080p25/30 HD resolution in environments with ambient light extremes. Both camera variants--MIC IP starlight 7000 HD (MIC71xx) and MIC IP dynamic 7000 HD (MIC72xx)--have a 30x optical zoom (12x digital) and flexible, field-selectable mounting orientations (upright, inverted, or canted) to achieve the perfect field of view.

  • Page 15: Overview Of Installation Steps

    MIC IP starlight 7000 HD, MIC IP Overview of Installation Steps | en dynamic 7000 HD Overview of Installation Steps The following figure identifies the steps to install a MIC7000 camera. To install your MIC camera, follow these steps in sequence.

  • Page 16: Configuration Programming In The Shipping Box

    MIC IP starlight 7000 HD, MIC IP en | Configuration Programming in the Shipping Box dynamic 7000 HD Configuration Programming in the Shipping Box Caution! Take extra care lifting or moving MIC7000 cameras because of their weight (6.7 kg (14.7 lb)).

  • Page 17: Configuration Programming On A Temporary Table-Top Stand

    MIC IP starlight 7000 HD, MIC IP Configuration Programming on a Temporary Table-top Stand | en dynamic 7000 HD Configuration Programming on a Temporary Table-top Stand The camera (still in the foam) can stand temporarily on a flat, horizontal surface such as a desk or a table during initial network connection and configuration.

  • Page 18: Mounting Location And Mounting Orientation

    If the camera is installed in a highly exposed location where lightning strikes may occur, then Bosch recommends installing a separate lightning conductor within 0.5 m (1.6 ft) of the camera and at least 1.5 m (4.9 ft) higher than the camera. A good earth bonding connection to the camera housing itself will provide protection against damage from secondary strikes.

  • Page 19: Select The Mounting Orientation

    MIC IP starlight 7000 HD, MIC IP Mounting Location and Mounting Orientation | en dynamic 7000 HD Avoid installation practices that may bring the camera’s metal mountings in contact with materials such as stainless steel. Such contacts can result in galvanic corrosion and degrade the cosmetic appearance of the camera.
  • Page 20 MIC IP starlight 7000 HD, MIC IP en | Mounting Location and Mounting Orientation dynamic 7000 HD Figure 7.1: Top view of canted MIC7000 illustrating distance of pan clearance The figure below illustrates the tilt range of the camera in upright orientation.

  • Page 21: Overview Of Mounting Options

    Overview of Mounting Options | en dynamic 7000 HD Overview of Mounting Options Bosch sells a complete series of mounting brackets that support multiple mounting configurations. The most common type of mounting location is the top of a pole suitable to support CCTV equipment and that provides a robust mounting platform to minimize camera motion and typically has a large base cabinet for mounting ancillary equipment such as power supplies.
  • Page 22 MIC IP starlight 7000 HD, MIC IP en | Overview of Mounting Options dynamic 7000 HD Figure 8.2: Typical Pole mount configuration Other locations for mounting the camera include the top of a building, the side (wall) of a building, the corner of a building, and under the eave of a building.
  • Page 23 MIC IP starlight 7000 HD, MIC IP Overview of Mounting Options | en dynamic 7000 HD Figure 8.5: Direct surface mount – camera upright (MIC + base gasket) Figure 8.6: Direct surface mount – camera inverted (MIC + base gasket + IP67 Weatherization/Connector...

  • Page 24: Install The Camera

    Electrical Code (NEC)), Canadian Electrical Code, Part I (also called CE Code or CSA C22.1), ® and all applicable local codes. Bosch Security Systems, Inc. accepts no liability for any damages or losses caused by incorrect or improper installation. Caution!

  • Page 25: Make Connections - Power And Control

    The camera can be powered by a network compliant to High Power-over-Ethernet (Bosch’s version of High PoE) using a Bosch model of High PoE Midspans (sold separately). With this configuration, only a single (Cat5e/Cat6) cable connection is required to view, to power, and to control the camera.

  • Page 26: Ethernet Connections

    Use the 95 W midspan sold by Bosch. with illuminators) High PoE (60W only for models Use the 60 W midspan sold by Bosch, or a midspan that is compliant to the without illuminators) IEEE 802.3at, class 4 standard. Terminal Connector RJ45, Male 2014.09 | 1.3 | F.01U.291.520...

  • Page 27: Camera Connections

    Note: If the MIC camera will be installed directly to a mounting surface, instead of onto a MIC DCA or a MIC wall mount bracket, Bosch recommends using the optional IP67 Weatherization/ Connector Kit (MICIP67-5pk, sold separately) to protect the connections against moisture and dust particles.

  • Page 28: Connect The Camera To The Network

    MIC IP starlight 7000 HD, MIC IP en | Make Connections - Power and Control dynamic 7000 HD 10.5 Connect the Camera to the Network Note: Refer to the following figure for an illustration of both options. Option A: 1. Connect an Ethernet cable (Cat5e/Cat6) from the RJ45 connector of the camera to a network switch attached to the Local Area Network (LAN).

  • Page 29: Cant The Camera

    DCA, with the DCA base upright! It is unstable and might fall and cause bodily injury and/or damage to the camera. Bosch strongly recommends canting the camera after attaching it to a DCA and mounting it in the desired location.
  • Page 30 MIC IP starlight 7000 HD, MIC IP en | Cant the Camera dynamic 7000 HD Notice! If your MIC camera will be canted, install the sunshield first. If your MIC camera will have both illuminator and sunshield accessories, install the illuminator first.
  • Page 31 MIC IP starlight 7000 HD, MIC IP Cant the Camera | en dynamic 7000 HD T27 Torx Figure 11.3: Remove screws from yoke arms Notice! Risk of damage to the device. Carefully support the head of the camera while completing the next three (3) steps.
  • Page 32 MIC IP starlight 7000 HD, MIC IP en | Cant the Camera dynamic 7000 HD Figure 11.4: Canting the camera head 5. Reinsert two (2) Torx screws into each yoke arm. Tighten the screws. T27 Torx 4.3 N m (≈ 38 in. lb) Figure 11.5: Tighten yoke arm screws...
  • Page 33 MIC IP starlight 7000 HD, MIC IP Cant the Camera | en dynamic 7000 HD 1/4” 1.4 N m (≈ 12 in. lb) Figure 11.6: Attach yoke caps 7. Canting is complete. Bosch Security Systems Operation Manual 2014.09 | 1.3 | F.01U.291.520...

  • Page 34: Typical System Configurations

    MIC IP starlight 7000 HD, MIC IP en | Typical System Configurations dynamic 7000 HD Typical System Configurations 12.1 Typical IP Configuration with 95 W midspan (no I/O connections) Figure 12.1: Typical IP configuration with 95 W midspan (no I/O connections)

  • Page 35: Typical Configuration With Mic-Alm-Was-24

    MIC IP starlight 7000 HD, MIC IP Typical System Configurations | en dynamic 7000 HD 12.2 Typical Configuration with MIC-ALM-WAS-24 Figure 12.2: Typical configuration with MIC-ALM-WAS-24 1 MIC7000 camera 6 24 VAC Power pack, 1A, 50/60 Hz (user-supplied) 2 MIC Hinged DCA (MIC-DCA-Hx)

  • Page 36: Typical Ip Configuration With Vjc-7000-90

    MIC IP starlight 7000 HD, MIC IP en | Typical System Configurations dynamic 7000 HD 12.3 Typical IP Configuration with VJC-7000-90 Figure 12.3: Typical IP configuration with VJC-7000-90 1 MIC7000 camera 6 Audio input / output interface cables (user-supplied) 2 MIC Hinged DCA (MIC-DCA-Hx)

  • Page 37: Configuration

    You can find notes on using Microsoft Internet Explorer in the online Help in Internet Explorer. If you choose to use a computer running Microsoft Internet Explorer or any of the Bosch software, the computer must conform to the following minimum requirements: –...

  • Page 38: Configuring The Camera

    13.2.1 Using the Configuration Manager Configuration Manager is an optional network utility provided on the Bosch Security Systems Web site. Use the Configuration Manager Manual to make any configuration changes. Note: Depending on the PC network security settings, the user may need to add the new IP address to the browser’s trusted sites list for the controls to operate.
  • Page 39 MIC IP starlight 7000 HD, MIC IP Configuration | en dynamic 7000 HD 7. Configure the settings on this page based on the addresses provided by your local network administrator. Note that the text on the Set button changes to Set and Reboot.

  • Page 40: About The Settings Page

    MIC IP starlight 7000 HD, MIC IP en | Configuration dynamic 7000 HD Notice! Click the Help on this page? link if you need more information. NOTE: Screenshots of configuration settings in this manual are from a MIC 7130 model.

  • Page 41: Configuring Audio (Optional)

    MIC IP starlight 7000 HD, MIC IP Configuration | en dynamic 7000 HD Some changes only take effect after the unit is rebooted. In this case, the Set button changes to Set and Reboot. Make the desired changes. Click the Set and Reboot button. The camera reboots and the changed settings are activated.

  • Page 42: Configuration Via Ip, Basic Mode

    MIC IP starlight 7000 HD, MIC IP en | Configuration via IP, Basic Mode dynamic 7000 HD Configuration via IP, Basic Mode 14.1 Basic Mode: Device Access Camera name You can give the camera a name to make it easier to identify. The name makes the task of administering multiple units in larger video monitoring systems easier, for example using the Bosch Video Management Systems programs.

  • Page 43: Basic Mode: Network

    If a DHCP server is employed in the network for the dynamic assignment of IP addresses, you can activate acceptance of IP addresses automatically assigned to the camera. Certain applications (VIDOS, Bosch Video Management Systems, Archive Player, Configuration Manager) use the IP address for the unique assignment of the unit. If you use these...

  • Page 44: Basic Mode: Audio

    MIC IP starlight 7000 HD, MIC IP en | Configuration via IP, Basic Mode dynamic 7000 HD Pre-programmed profiles are available, each giving priority to different perspectives. When selecting a profile, details are displayed in the list field. Default Profile name...

  • Page 45: Basic Mode: System Overview

    MIC IP starlight 7000 HD, MIC IP Configuration via IP, Basic Mode | en dynamic 7000 HD Storage medium Select the required storage medium from the list. Click the Start button to start the recording immediately. 14.7 Basic Mode: System Overview The data on this page are for information purposes only and cannot be changed.

  • Page 46: Configuration Via Ip, Advanced Mode

    BVC or Bosch Video Management Systems Programs. Enter a unique, unambiguous name for the camera in this field. You can use both lines for this.

  • Page 47: Date/Time

    MIC IP starlight 7000 HD, MIC IP Configuration via IP, Advanced Mode | en dynamic 7000 HD With the user authorization level, you can operate the unit and also control cameras, for example, but you cannot change the configuration. The lowest authorization level is live. It can only be used to view the live video image and switch between the different live image displays.

  • Page 48: Display Stamping

    MIC IP starlight 7000 HD, MIC IP en | Configuration via IP, Advanced Mode dynamic 7000 HD Select the region or the city that is closest to the system's location from the list field below the table. Click the Generate button to generate data from the database in the unit and enter it into the table.

  • Page 49: Advanced Mode: Web Interface

    MIC IP starlight 7000 HD, MIC IP Configuration via IP, Advanced Mode | en dynamic 7000 HD Alarm mode stamping Select On to display a text message overlay in the image in the event of an alarm. It can be displayed at a position of your choice that you can then specify using the Custom option.

  • Page 50: Live Functions

    MIC IP starlight 7000 HD, MIC IP en | Configuration via IP, Advanced Mode dynamic 7000 HD Notice! You can use either GIF or JPEG images. The file paths must correspond to the access mode (for example C:\Images\Logo.gif for access to local files, or http://www.mycompany.com/ images/logo.gif for access via the Internet/Intranet).

  • Page 51: Logging

    MIC IP starlight 7000 HD, MIC IP Configuration via IP, Advanced Mode | en dynamic 7000 HD Transmit audio You can only select this option if audio transmission is actually switched on (see Audio, page 64).The audio signals are sent in a separate data stream parallel to the video data, and so increase the network load.

  • Page 52: Advanced Mode: Camera

    MIC IP starlight 7000 HD, MIC IP en | Configuration via IP, Advanced Mode dynamic 7000 HD File for event log Enter the path for saving the event log here. If necessary, click Browse to find a suitable directory. Save system log Check this option to save system messages in a text file on your local computer.

  • Page 53: Encoder Profile

    MIC IP starlight 7000 HD, MIC IP Configuration via IP, Advanced Mode | en dynamic 7000 HD This section also displays a graphic that shows the relative image size difference between an image encoded at 1280 x 720 and at 1920 x 1080.
  • Page 54 MIC IP starlight 7000 HD, MIC IP en | Configuration via IP, Advanced Mode dynamic 7000 HD Default Profile name Description SD Bit Rate Optimized For an SD image, the video bit rate and frame quality are adjusted to ensure that the bit rate is the priority.

  • Page 55: Encoder Streams

    MIC IP starlight 7000 HD, MIC IP Configuration via IP, Advanced Mode | en dynamic 7000 HD compression and thus the image quality for every frame. The lower the quantization of the P- frame (QP value), the higher the encoding quality (and thus the best image quality) and the lower the frame refresh rate depending on the settings for the maximum data rate under network settings.
  • Page 56 MIC IP starlight 7000 HD, MIC IP en | Configuration via IP, Advanced Mode dynamic 7000 HD Stream 2 (recording) Options vary depending on Stream 1 selection. Options with “H.264 MP 1080p25/30 Fixed” selected for Stream 1: - Copy Stream 1;...

  • Page 57: Privacy Masks

    MIC IP starlight 7000 HD, MIC IP Configuration via IP, Advanced Mode | en dynamic 7000 HD – Max. frame rate: Select one of the following frame rates to be the maximum: 5, 10, 15, 20, 25, or 30 ips.
  • Page 58 MIC IP starlight 7000 HD, MIC IP en | Configuration via IP, Advanced Mode dynamic 7000 HD – General – Default mode. Suitable for most applications. – Low light – Optimized performance for scenes with low light level. – Motion – Optimized to minimize motion artifacts, such as when monitoring traffic or fast- moving objects.
  • Page 59 MIC IP starlight 7000 HD, MIC IP Configuration via IP, Advanced Mode | en dynamic 7000 HD AE-response speed Select the speed of the response of auto exposure. Options are Super slow, Slow, Medium (default), Fast. Sharpness Adjusts the sharpness of the picture. To set the sharpness, use the slider to select a number.

  • Page 60: Lens Settings

    MIC IP starlight 7000 HD, MIC IP en | Configuration via IP, Advanced Mode dynamic 7000 HD – Auto (default): The camera switches out of Night Mode after the ambient light level reaches a pre-defined threshold. Night mode threshold Adjusts the level of light at which the camera automatically switches out of night mode (B/W) operation.

  • Page 61: Ptz Settings

    MIC IP starlight 7000 HD, MIC IP Configuration via IP, Advanced Mode | en dynamic 7000 HD Zoom polarity Capability to reverse the operation of the zoom button on the controller. – Normal (default): zoom controls operate normally. – Reverse: zoom controls are reversed.

  • Page 62: Illumination/Wiper

    MIC IP starlight 7000 HD, MIC IP en | Configuration via IP, Advanced Mode dynamic 7000 HD Auto pan right limit Sets the right Auto Pan limit of the camera. Use the preview window to move the camera to the right pan limit and click the button. The camera will not move past this limit when in Auto Pan Between Limits mode (AUX 2 ON).

  • Page 63: Scenes And Tours

    MIC IP starlight 7000 HD, MIC IP Configuration via IP, Advanced Mode | en dynamic 7000 HD Controls the wiper of the MIC cameras. Options are: – Off: Turns off the wiper. – On: Wiper wipes continuously until deactivated manually, or until it has been on for five minutes (after which the camera will stop the wiper automatically).

  • Page 64: Sectors

    MIC IP starlight 7000 HD, MIC IP en | Configuration via IP, Advanced Mode dynamic 7000 HD Return to the LIVE page. Click the Aux Control tab. Type 8 in the input box and click the Aux On button. To stop the tour, type 8 and click the Aux Off button.

  • Page 65: Pixel Counter

    It is also possible to let the VRM Video Recording Manager control all recording with accessing an iSCSI system. This is an external program for configuring recording tasks for video servers. For further information please contact your local customer service at Bosch Security Systems Inc.
  • Page 66 MIC IP starlight 7000 HD, MIC IP en | Configuration via IP, Advanced Mode dynamic 7000 HD Local Media The supported local recording media are displayed in the Storage overview field. Activating and Configuring Storage Media The storage overview displays the available storage media. You can select individual media or iSCSI drives and transfer these to the Managed storage media list.

  • Page 67: Recording Profiles

    MIC IP starlight 7000 HD, MIC IP Configuration via IP, Advanced Mode | en dynamic 7000 HD Click the Remove button below the list. The storage medium is deactivated and removed from the list. 15.26 Recording Profiles You can define up to ten different recording profiles. You will then use these recording profiles in the recording scheduler, where they are linked with the individual days and times (see Recording Scheduler, page 68).

  • Page 68: Maximum Retention Time

    MIC IP starlight 7000 HD, MIC IP en | Configuration via IP, Advanced Mode dynamic 7000 HD Virtual alarm Here you can select the virtual alarm sensors that are to trigger a recording, via RCP+ commands or alarm scripts, for example.

  • Page 69: Recording Status

    MIC IP starlight 7000 HD, MIC IP Configuration via IP, Advanced Mode | en dynamic 7000 HD Click the Holidays tab. Any days that have already been selected will be shown in the table. Click the Add button. A new window will open.

  • Page 70: Alarm Connections

    VIDOS or Bosch Video Management System, you can store a general password here. The camera can use this general password to connect to all remote stations protected with the same password.
  • Page 71 MIC IP starlight 7000 HD, MIC IP Configuration via IP, Advanced Mode | en dynamic 7000 HD Stream Select the number of the stream from the drop-down list. Remote port Depending on the network configuration, select a browser port here. The ports for HTTPS connections will be available only if the On option is selected in the SSL encryption parameter.

  • Page 72: Vca

    MIC IP starlight 7000 HD, MIC IP en | Configuration via IP, Advanced Mode dynamic 7000 HD 15.32 The camera has integrated video content analysis (VCA), which can detect and analyze changes in the signal on the basis of image processing. Such changes can be due to movements in the camera's field of view.
  • Page 73 MIC IP starlight 7000 HD, MIC IP Configuration via IP, Advanced Mode | en dynamic 7000 HD Aggregation times Use the slider (from 0 (zero) to 20 (0 is the default) to select the aggregation times. Analysis type Select the required analysis algorithm. By default, only MOTION+ is available – this offers a motion detector and essential recognition of tampering.
  • Page 74 MIC IP starlight 7000 HD, MIC IP en | Configuration via IP, Advanced Mode dynamic 7000 HD Select Area (MOTION+ only) The areas of the image to be monitored by the motion detector can be selected. The video image is subdivided into 858 square fields. Each of these fields can be activated or deactivated individually.
  • Page 75 MIC IP starlight 7000 HD, MIC IP Configuration via IP, Advanced Mode | en dynamic 7000 HD Global change Activate this function if the global change, as set with the Global change slide control, should trigger an alarm. Scene too bright Activate this function if tampering associated with exposure to extreme light (for instance, shining a flashlight directly on the lens) should trigger an alarm.

  • Page 76: Virtual Masks

    Select On if you want the device to generate audio alarms. Name The name makes it easier to identify the alarm in extensive video monitoring systems, for example with the VIDOS and Bosch Video Management System programs. Enter a unique and clear name here. Caution! Do not use any special characters, for example &, in the name.

  • Page 77: Alarm E-Mail

    MIC IP starlight 7000 HD, MIC IP Configuration via IP, Advanced Mode | en dynamic 7000 HD Threshold Set up the threshold on the basis of the signal visible in the graphic. You can set the threshold using the slide control or, alternately, you can move the white line directly in the graphic using the mouse.

  • Page 78: Alarm Task Editor

    MIC IP starlight 7000 HD, MIC IP en | Configuration via IP, Advanced Mode dynamic 7000 HD 15.36 Alarm Task Editor Caution! Editing scripts on this page overwrites all settings and entries on the other alarm pages. This procedure cannot be reversed.

  • Page 79: Alarm Inputs

    If a DHCP server is employed in the network for the dynamic assignment of IP addresses, you can activate acceptance of IP addresses automatically assigned to the camera. Certain applications (Bosch Video Management System, Archive Player, Configuration Manager) use the IP address for the unique assignment of the unit. If you use these...
  • Page 80 MIC IP starlight 7000 HD, MIC IP en | Configuration via IP, Advanced Mode dynamic 7000 HD IPv4 Fill in the 3 fields in this section of the screen. IP address Enter the desired IP address for the camera in this field. The IP address must be valid for the network.

  • Page 81: Dyndns

    MIC IP starlight 7000 HD, MIC IP Configuration via IP, Advanced Mode | en dynamic 7000 HD The camera uses the TLS 1.0 encryption protocol. You may have to activate this protocol via your browser configuration. You must also activate the protocol for the Java applications (via the Java control panel in the Windows control panel).

  • Page 82: Advanced

    MIC IP starlight 7000 HD, MIC IP en | Configuration via IP, Advanced Mode dynamic 7000 HD User name Enter the user name you registered at DynDNS.org here. Password Enter the password you registered at DynDNS.org here. Force registration now You can force the registration by transferring the IP address to the DynDNS server.

  • Page 83: Network Management

    MIC IP starlight 7000 HD, MIC IP Configuration via IP, Advanced Mode | en dynamic 7000 HD Sender IP address Enter the IP address of the TCP metadata sender here. 15.45 Network Management SNMP The camera supports the SNMP V1 (Simple Network Management Protocol) for managing and monitoring network components, and can send SNMP messages (traps) to IP addresses.

  • Page 84: Image Posting

    MIC IP starlight 7000 HD, MIC IP en | Configuration via IP, Advanced Mode dynamic 7000 HD Notice! Multicast operation requires a multicast-enabled network that uses the UDP and the Internet Group Management IGMP protocols. Other group management protocols are not supported.

  • Page 85: Accounts

    MIC IP starlight 7000 HD, MIC IP Configuration via IP, Advanced Mode | en dynamic 7000 HD Image size Select the size of the images that you want to save: – Small – Medium – Large – 720p – 1080p File name You can select how file names will be created for the individual images that are transmitted.

  • Page 86: Ipv4 Filter

    MIC IP starlight 7000 HD, MIC IP en | Configuration via IP, Advanced Mode dynamic 7000 HD Path Enter the exact path on which you wish to post the images on the server. To browse for the correct path, click the Browse button to the right.

  • Page 87: Licenses

    MIC IP starlight 7000 HD, MIC IP Configuration via IP, Advanced Mode | en dynamic 7000 HD Caution! Before launching the firmware upload make sure that you have selected the correct upload file. Uploading the wrong files can result in the unit no longer being addressable, in which case you must replace the unit.

  • Page 88: Diagnostics

    Some devices ship with labels that identify the unique MAC address of each network device. The number on these labels matches the number in the MAC address field of the System Overview for each device. Bosch recommends that you keep the MAC address labels in a safe place for future reference.

  • Page 89: Operation

    If you do not connect, the unit may have reached its maximum number of connections. Depending on the unit and network configuration, each camera can have up to 50 Web browser connections or up to 100 connections via the Bosch Video Management System (BVMS).

  • Page 90: View Control

    MIC IP starlight 7000 HD, MIC IP en | Operation dynamic 7000 HD You can obtain additional information to help when you troubleshoot or fine-tune the unit. The values indicate the proportions of the individual functions on the encoder load, shown as percentages.

  • Page 91: Aux Control

    MIC IP starlight 7000 HD, MIC IP Operation | en dynamic 7000 HD ¹ This function is also accessible by using the mouse scroll wheel while in the Live video frame. ² This button is also used as the “Enter” button to select menu items from the AUX tab.
  • Page 92 MIC IP starlight 7000 HD, MIC IP en | Operation dynamic 7000 HD Command number field Keypad (numbers 0-9) Show a preset scene Set a preset scene Initiates a command Deletes a number in the Command Number field Used to select a menu item...

  • Page 93: Special Functions

    MIC IP starlight 7000 HD, MIC IP Operation | en dynamic 7000 HD 16.1.3 Special Functions LIVE page Special Functions The camera offers special command buttons on the LIVE page. Scan 360° Click this button to start a continuous 360° pan. To stop the continuous pan, click a directional control in the View Control tab.

  • Page 94: System Log/Event Log

    MIC IP starlight 7000 HD, MIC IP en | Operation dynamic 7000 HD 16.1.5 System Log/Event Log System Log The System Log field contains information about the operating status of the camera and the connection. You can save these messages automatically in a file (see the online help).

  • Page 95: Recording

    MIC IP starlight 7000 HD, MIC IP Operation | en dynamic 7000 HD 16.1.8 Recording Recording Video Sequences You can save sections of the video sequence currently shown on the LIVE page on your computer's hard drive. The icon for recording video sequences is only visible if the unit is configured to enable this process.
  • Page 96 MIC IP starlight 7000 HD, MIC IP en | Operation dynamic 7000 HD Start/Pause playback Jump to start of active sequence or to previous sequence Jump to start of the next video sequence in the list Continuously select playback speed by means of the speed regulator (slide control): Bookmarks In addition, set markers in the sequences, so-called bookmarks, and jump directly to these.

  • Page 97: Using Intelligent Tracking

    MIC IP starlight 7000 HD, MIC IP Operation | en dynamic 7000 HD 16.2 Using Intelligent Tracking Configuring Intelligent Tracking The camera utilizes the built-in Intelligent Video Analytics (IVA) to continuously follow an individual or object even if it passes behind a Privacy Mask or a stationary object. The camera uses objects detected by IVA in a stationary preset position to activate the Intelligent Tracking feature.
  • Page 98 MIC IP starlight 7000 HD, MIC IP en | Operation dynamic 7000 HD Guidelines for Implementing Intelligent Tracking Factors such as the viewing angle and unwanted motion (from trees, for example) may interfere with Intelligent Tracking operation. Use the following recommendations to ensure smooth Intelligent Tracking operation: –...
  • Page 99 MIC IP starlight 7000 HD, MIC IP Operation | en dynamic 7000 HD – Auto: In this mode, the camera actively analyzes the video to detect any moving object. If it detects movement, the camera begins to track the moving object. This mode is most useful for scenarios where no motion is expected in the scene.

  • Page 100: Recommended Use Of Your Mic Camera

    The tour should also include at least 10° of tilt movement. Preset Tours For scenarios that require the camera to be in continuous motion for most of the day, Bosch recommends that you set the camera in Preset Tour mode, moving between a desired set of presets.

  • Page 101: Troubleshooting

    MIC IP starlight 7000 HD, MIC IP Troubleshooting | en dynamic 7000 HD Troubleshooting Table of Troubleshooting Issues The table below identifies issues that could occur with the camera, and how to resolve them. Problem Questions to Ask/Actions to Resolve the Problem No camera control.
  • Page 102 MIC IP starlight 7000 HD, MIC IP en | Troubleshooting dynamic 7000 HD The image on the screen is distorted. Is the power frequency set properly in sync? If the power frequency is not set correctly, the line lock synchronization mode cannot be used. Set the synchronization mode to INT.

  • Page 103: Maintenance

    No User-serviceable Parts Except for the external wiper blade, the device contains no user-serviceable parts. Contact your local Bosch service center for device maintenance and repair. In the event of failure, the device should be removed from site for repair.

  • Page 104: Decommissioning

    MIC IP starlight 7000 HD, MIC IP en | Decommissioning dynamic 7000 HD Decommissioning 19.1 Transfer The unit should only be passed on together with this installation guide. 19.2 Disposal Old electrical and electronic appliances Electrical or electronic devices that are no longer serviceable must be collected separately and sent for environmentally compatible recycling (in accordance with the European Waste Electrical and Electronic Equipment Directive).

  • Page 105: Technical Data

    MIC IP starlight 7000 HD, MIC IP Technical data | en dynamic 7000 HD Technical data For product specifications, see the datasheet for your camera, available on the appropriate product pages of the Online Product Catalog at www.boschsecurity.com. Bosch Security Systems Operation Manual 2014.09 | 1.3 | F.01U.291.520...

  • Page 106: Keyboard Commands By Number

    MIC IP starlight 7000 HD, MIC IP en | Keyboard Commands By Number dynamic 7000 HD Keyboard Commands By Number Note: * denotes a Locked command. Function Command Command Description On/Off Scan 360° / Auto Pan Activates /deactivates Autopan without limits.
  • Page 107 MIC IP starlight 7000 HD, MIC IP Keyboard Commands By Number | en dynamic 7000 HD Function Command Command Description On/Off Playback B, single Activates /deactivates single Playback B. On/Off IR Illuminator Controls IR Illuminators (On/Off). On/Off/ Night Mode Menu...
  • Page 108 MIC IP starlight 7000 HD, MIC IP en | Keyboard Commands By Number dynamic 7000 HD Function Command Command Description On/Off Digital Zoom Lock Turns digital zoom on and off. On/Off Alarm Output 1 On–Activates output. Open Collector Off–Deactivates output.
  • Page 109 MIC IP starlight 7000 HD, MIC IP Keyboard Commands By Number | en dynamic 7000 HD Function Command Command Description Wiper wipe Intermittent; wipes twice, then turns off after 15 seconds. Wiper wipe On shot; wipes five times, then turns off.
  • Page 112 Bosch Security Systems, Inc. Bosch Sicherheitssysteme GmbH 850 Greenfield Road Robert-Bosch-Ring 5 Lancaster, PA, 17601 85630 Grasbrunn Germany www.boschsecurity.com © Bosch Security Systems, Inc., 2014...

This manual is also suitable for:

Mic-71Mic-72Mic-7130-pb4pbMic-7130-pw4pbMic-7230-pb4pbMic-7230-pw4pb

Table of Contents