Related Manuals for Bosch MIC-7230-PB4
Summary of Contents for Bosch MIC-7230-PB4
- Page 1 MIC IP starlight 7000 HD, MIC IP dynamic 7000 HD MIC71xx, MIC72xx Operation Manual...
-
Page 3: Table Of Contents
Basic Mode: Device Access 14.2 Basic Mode: Date/Time 14.3 Basic Mode: Network 14.4 Basic Mode: Encoder 14.5 Basic Mode: Audio 14.6 Basic Mode: Recording 14.7 Basic Mode: System Overview Bosch Security Systems, Inc. Operation Manual 2014.05 | 1.0 | F.01U.291.520... - Page 4 Advanced Mode: Interfaces 15.39 Alarm Inputs 15.40 Alarm Outputs 15.41 Advanced Mode: Network 15.42 Network Access 15.43 DynDNS 15.44 Advanced 15.45 Network Management 15.46 Multicast 15.47 Image Posting 15.48 Accounts 2014.05 | 1.0 | F.01U.291.520 Operation Manual Bosch Security Systems, Inc.
- Page 5 Saving snapshots 16.1.8 Recording 16.1.9 Playback 16.2 Using Intelligent Tracking 16.3 Recommended Use of Your MIC Camera Troubleshooting Maintenance Decommissioning 19.1 Transfer 19.2 Disposal Technical data Keyboard Commands By Number Bosch Security Systems, Inc. Operation Manual 2014.05 | 1.0 | F.01U.291.520...
-
Page 6: Safety
Legal Information Copyright This manual is the intellectual property of Bosch Security Systems, Inc. and is protected by copyright. All rights reserved. Trademarks All hardware and software product names used in this document are likely to be registered trademarks and must be treated accordingly. - Page 7 Use common-sense safety precautions, especially in situations where there could be risk of injury if any part of the assembly becomes detached and falls. Bosch recommends using the hinged DCA, which allows installers to “hang” the MIC camera temporarily on the DCA to make electrical connections, before bolting the camera to the DCA.
-
Page 8: Important Notices
Camera signal - Protect the cable with a primary protector if the camera signal is beyond 140 feet, in accordance with NEC800 (CEC Section 60). Environmental statement - Bosch has a strong commitment towards the environment. This unit has been designed to respect the environment as much as possible. - Page 9 The user may find the following booklet, prepared by the Federal Communications Commission, helpful: How to Identify and Resolve Radio-TV Interference Problems. This booklet is available from the U.S. Government Printing Office, Washington, DC 20402, Stock No. 004-000-00345-4. Bosch Security Systems, Inc. Operation Manual 2014.05 | 1.0 | F.01U.291.520...
- Page 10 60950-1 . UL Certification does not cover the performance or reliability of the security or signaling aspects of this product. UL MAKES NO REPRESENTATIONS, WARRANTIES, OR CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING-RELATED FUNCTIONS OF THIS PRODUCT. 2014.05 | 1.0 | F.01U.291.520 Operation Manual Bosch Security Systems, Inc.
-
Page 11: Important Notices - Illumination Safety
2.19 100 s 200 mm 0.386 Infrared Hazard Hazard 279 mm Distance Retinal Blue Light 10,000 s 200 mm 22.9 100s 200 mm 0.266 Hazard Hazard 2675 mm Distance Bosch Security Systems, Inc. Operation Manual 2014.05 | 1.0 | F.01U.291.520... -
Page 12: Customer Support And Service
MIC IP starlight 7000 HD, MIC IP en | Safety dynamic 7000 HD Customer Support and Service If this unit needs service, contact the nearest Bosch Security Systems Service Center for authorization to return and shipping instructions. Service Centers Telephone: 800-366-2283 or 585-340-4162 Fax: 800-366-1329 Email: cctv.repair@us.bosch.com... -
Page 13: Unpacking
Verify that all the parts listed in the Parts List below are included. If any items are missing, notify your Bosch Security Systems Sales or Customer Service Representative. – Do not use this product if any component appears to be damaged. Please contact Bosch Security Systems in the event of damaged goods. –... -
Page 14: Product Description
VG4-A-PSU1 24 VAC (96 W) power supply NPD-9501A 95 W midspan VG4-A-PSU2 MIC-ALM-WAS-24 Alarm and washer interface MIC-67SUNSHLD Sunshield (white only) accessory unit 2014.05 | 1.0 | F.01U.291.520 Operation Manual Bosch Security Systems, Inc. -
Page 15: Overview Of Installation Steps
Install a Install sunshield? sunshield. Will Cant the camera. camera be canted? (Refer to Section 11.) Configure settings. (Refer to Section 13.) Operate the camera. (Refer to Section 16.) Bosch Security Systems, Inc. Operation Manual 2014.05 | 1.0 | F.01U.291.520... -
Page 16: Configuration Programming In The Shipping Box
“Inverted,” remove the camera from the box and configure it by following the steps in Configuration Programming on a Temporary Table-top Stand, page 17. 4. Disconnect the wires/cables from the connectors in the base of the camera. 2014.05 | 1.0 | F.01U.291.520 Operation Manual Bosch Security Systems, Inc. -
Page 17: Configuration Programming On A Temporary Table-Top Stand
(180°). Note that the visor will be near the top of the body of the camera. 6. Disconnect the wires/cables from the connectors in the base of the camera. Bosch Security Systems, Inc. Operation Manual 2014.05 | 1.0 | F.01U.291.520... -
Page 18: Mounting Location And Mounting Orientation
If the camera is installed in a highly exposed location where lightning strikes may occur, then Bosch recommends installing a separate lightning conductor within 0.5 m (1.6 ft) of the camera and at least 1.5 m (4.9 ft) higher than the camera. A good earth bonding connection to the camera housing itself will provide protection against damage from secondary strikes. -
Page 19: Select The Mounting Orientation
(the body of the MIC), instead of at the bottom of the inverted camera. Note: For canted cameras, ensure that your mounting location provides the necessary clearance (370 mm (14.6 in.)) for the camera head to pan. Bosch Security Systems, Inc. Operation Manual 2014.05 | 1.0 | F.01U.291.520... - Page 20 The figure below illustrates the tilt range of the camera in upright orientation. 90° 90° 55° 55° Figure 7.2: MIC7000 Tilt Range: 145° each direction; 290° if AutoPivot enabled 2014.05 | 1.0 | F.01U.291.520 Operation Manual Bosch Security Systems, Inc.
-
Page 21: Overview Of Mounting Options
Overview of Mounting Options | en dynamic 7000 HD Overview of Mounting Options Bosch sells a complete series of mounting brackets that support multiple mounting configurations. The most common type of mounting location is the top of a pole suitable to support CCTV equipment and that provides a robust mounting platform to minimize camera motion and typically has a large base cabinet for mounting ancillary equipment such as power supplies. - Page 22 Other locations for mounting the camera include the top of a building, the side (wall) of a building, the corner of a building, and under the eave of a building. Figure 8.3: Typical Wall mount configuration Figure 8.4: Typical Corner mount configuration 2014.05 | 1.0 | F.01U.291.520 Operation Manual Bosch Security Systems, Inc.
- Page 23 Figure 8.6: Direct surface mount – camera inverted (MIC + base gasket + IP67 Weatherization/Connector Kit) Notice! Observe all appropriate safety precautions and local building regulations. Refer to the MIC Series Mounting Brackets Installation Guide for installation instructions. Bosch Security Systems, Inc. Operation Manual 2014.05 | 1.0 | F.01U.291.520...
-
Page 24: Install The Camera
Electrical Code (NEC)), Canadian Electrical Code, Part I (also called CE Code or CSA C22.1), ® and all applicable local codes. Bosch Security Systems, Inc. accepts no liability for any damages or losses caused by incorrect or improper installation. Caution! -
Page 25: Make Connections - Power And Control
The camera can be powered by a network compliant to High Power-over-Ethernet (Bosch’s version of High PoE) using a Bosch model of High PoE Midspans (sold separately). With this configuration, only a single (Cat5e/Cat6) cable connection is required to view, to power, and to control the camera. -
Page 26: Ethernet Connections
High PoE (required for models with Use the 95 W midspan sold by Bosch. illuminators) PoE+ (only for models without Use the 60 W midspan sold by Bosch, or a midspan that is compliant to the illuminators) IEEE 802.3at, class 4 standard. Terminal Connector RJ45, Male 2014.05 | 1.0 | F.01U.291.520... -
Page 27: Camera Connections
Note: If the MIC camera will be installed directly to a mounting surface, instead of onto a MIC DCA or a MIC wall mount bracket, Bosch recommends using the optional IP67 Weatherization/ Connector Kit (MICIP67-5pk, sold separately) to protect the connections against moisture and dust particles. -
Page 28: Connect The Camera To The Network
Figure 10.2: MIC7000 IP System Configuration 1 MIC7000 camera 2 IP connection 3 Network switch 4 Networking device (computer, DVR/NVR, etc.) 2014.05 | 1.0 | F.01U.291.520 Operation Manual Bosch Security Systems, Inc. -
Page 29: Cant The Camera
DCA, with the DCA base upright! It is unstable and might fall and cause bodily injury and/or damage to the camera. Bosch strongly recommends canting the camera after attaching it to a DCA and mounting it in the desired location. - Page 30 Figure 11.2: Remove yoke caps with spanner tool 2. Remove the two (2) T27 Torx screws at the bottom of one yoke arm using a T27 Torx wrench (not supplied). 2014.05 | 1.0 | F.01U.291.520 Operation Manual Bosch Security Systems, Inc.
- Page 31 Risk of damage to the device. Do not cant the camera, or let it fall, in the wrong direction! The camera should cant only in the direction indicated in the figure directly below. Bosch Security Systems, Inc. Operation Manual 2014.05 | 1.0 | F.01U.291.520...
- Page 32 4.3 N m (≈ 38 in. lb) Figure 11.5: Tighten yoke arm screws 6. Attach the yoke caps using the Torque wrench with ¼ in. drive with the spanner tool. 2014.05 | 1.0 | F.01U.291.520 Operation Manual Bosch Security Systems, Inc.
- Page 33 MIC IP starlight 7000 HD, MIC IP Cant the Camera | en dynamic 7000 HD 1/4” 1.4 N m (≈ 12 in. lb) Figure 11.6: Attach yoke caps 7. Canting is complete. Bosch Security Systems, Inc. Operation Manual 2014.05 | 1.0 | F.01U.291.520...
-
Page 34: Typical System Configurations
95 W midspan (NPD-9501A) 4 95 W midspan (NPD-9501A) 5 Data only IP cable (Cat5e/Cat6; maximum 100 m (330 ft)) (user-supplied) between midspan and head-end network 2014.05 | 1.0 | F.01U.291.520 Operation Manual Bosch Security Systems, Inc. -
Page 35: Typical Configuration With Mic-Alm-Was-24
4 MIC-ALM-WAS-24 enclosure 9 Alarm input / output interface cables (user-supplied) 5 Interface cable for 24 VAC (user- 10 Monitored switch for Tamper Alarm supplied) for MIC-ALM-WAS-24 (user-supplied) Bosch Security Systems, Inc. Operation Manual 2014.05 | 1.0 | F.01U.291.520... -
Page 36: Typical Ip Configuration With Npd-Psu-Hpoe
NPD-PSU-HPOE 4 NPD-PSU-HPOE enclosure 9 Alarm input / output interface cables (user-supplied) 5 120 / 230 VAC 10 Data-only IP cable (Cat5e/Cat6 or fiber) to head-end network 2014.05 | 1.0 | F.01U.291.520 Operation Manual Bosch Security Systems, Inc. -
Page 37: Configuration
You can find notes on using Microsoft Internet Explorer in the online Help in Internet Explorer. If you choose to use a computer running Microsoft Internet Explorer or any of the Bosch software, the computer must conform to the following minimum requirements: –... -
Page 38: Configuring The Camera
13.2.1 Using the Configuration Manager Configuration Manager is an optional network utility provided on the Bosch Security Systems Web site. Use the Configuration Manager Manual to make any configuration changes. Note: Depending on the PC network security settings, the user may need to add the new IP address to the browser’s trusted sites list for the controls to operate. - Page 39 8. Click Set and Reboot. The camera will reset (go through the homing sequence, which usually takes 30 seconds to complete), and then the LIVE page appears, with updated video and the new IP address. Bosch Security Systems, Inc. Operation Manual 2014.05 | 1.0 | F.01U.291.520...
-
Page 40: About The Settings Page
If a page does show a Set button, you must click the Set button for a change to take effect. Caution! Save each change with the associated Set button. Clicking the Set button saves the settings only in the current field. Changes in any other fields are ignored. 2014.05 | 1.0 | F.01U.291.520 Operation Manual Bosch Security Systems, Inc. -
Page 41: Configuring Audio (Optional)
Make sure that the display does not go beyond the green zone during modulation. For more information, refer to Audio, page 64. Bosch Security Systems, Inc. Operation Manual 2014.05 | 1.0 | F.01U.291.520... -
Page 42: Configuration Via Ip, Basic Mode
You can give the camera a name to make it easier to identify. The name makes the task of administering multiple units in larger video monitoring systems easier, for example using the Bosch Video Management Systems programs. The device name is used for the remote identification of a unit, in the event of an alarm for example. -
Page 43: Basic Mode: Network
If a DHCP server is employed in the network for the dynamic assignment of IP addresses, you can activate acceptance of IP addresses automatically assigned to the camera. Certain applications (VIDOS, Bosch Video Management Systems, Archive Player, Configuration Manager) use the IP address for the unique assignment of the unit. If you use these... -
Page 44: Basic Mode: Audio
You can set the line output gain using the slider. Values range from 0 to 79. The default value is 0. 14.6 Basic Mode: Recording You can record the images from the camera on various local storage media or on an appropriately configured iSCSI system. 2014.05 | 1.0 | F.01U.291.520 Operation Manual Bosch Security Systems, Inc. -
Page 45: Basic Mode: System Overview
You can select all required text on this page with the mouse and copy it to the clipboard with the [Ctrl]+[C] key combination, for example if you want to send it via e-mail. Bosch Security Systems, Inc. Operation Manual 2014.05 | 1.0 | F.01U.291.520... -
Page 46: Configuration Via Ip, Advanced Mode
BVC or Bosch Video Management Systems Programs. Enter a unique, unambiguous name for the camera in this field. You can use both lines for this. -
Page 47: Date/Time
First check whether the correct time zone is selected. If it is not correct, select the appropriate time zone for the system, and click the Set button. Click the Details button. A new window will open and you will see the empty table. Bosch Security Systems, Inc. Operation Manual 2014.05 | 1.0 | F.01U.291.520... -
Page 48: Display Stamping
If necessary, you can also display milliseconds. This information can be useful for recorded video images; however, it does increase the processor's computing time. Select Off if you do not need to display milliseconds. 2014.05 | 1.0 | F.01U.291.520 Operation Manual Bosch Security Systems, Inc. -
Page 49: Advanced Mode: Web Interface
If necessary, you can replace the manufacturer's logo (top right) and the product name (top left) in the top part of the window with individual graphics. Bosch Security Systems, Inc. Operation Manual 2014.05 | 1.0 | F.01U.291.520... -
Page 50: Live Functions
Video player Select the desired video player from the list in the drop-down box. Options are “Auto detect” (default), Bosch Video SDK, Bosch Autoload Decoder, JPEG JPEG size You can specify the size of the JPEG image on the LIVE page. Options are Small, Medium, Large, 720p, 1080p, and “Best possible”... -
Page 51: Logging
Check this option to save event messages in a text file on your local computer. You can then view, edit and print this file with any text editor or the standard Office software. Bosch Security Systems, Inc. Operation Manual 2014.05 | 1.0 | F.01U.291.520... -
Page 52: Advanced Mode: Camera
A change to the Base frame rate or to the Max. frame rate parameter requires approximately 10-20 seconds to complete. During this time, no changes can be made. The cameo image freezes. 2014.05 | 1.0 | F.01U.291.520 Operation Manual Bosch Security Systems, Inc. -
Page 53: Encoder Profile
SD Balanced For an SD image, the video bit rate and frame quality are adjusted to a median profile for everyday use. Bosch Security Systems, Inc. Operation Manual 2014.05 | 1.0 | F.01U.291.520... - Page 54 This parameter allows you to adjust the image quality of the P-frame and to define the lower limit for the quantization of the P-frames, and thus the maximum achievable quality of the P- frames. In the H.264-protocol, the Quantization Parameter (QP) specifies the degree of 2014.05 | 1.0 | F.01U.291.520 Operation Manual Bosch Security Systems, Inc.
-
Page 55: Encoder Streams
Note: In order to select the option “H.264 MP 720p50/60 Fixed” here, you must set the Max. frame rate field in the Advanced Mode: Camera >Installer Menu to “H.264 MP 720p50/60 Fixed” first. Bosch Security Systems, Inc. Operation Manual 2014.05 | 1.0 | F.01U.291.520... - Page 56 1:1 Live View button. JPEG stream Select the resolution, frame rate, and image quality parameters for the M-JPEG stream. – Resolution: Select the appropriate resolution. 2014.05 | 1.0 | F.01U.291.520 Operation Manual Bosch Security Systems, Inc.
-
Page 57: Privacy Masks
Select one of the pre-programmed user modes, optimized with the best settings for a variety of typical applications, that best defines the environment in which the camera is installed. Bosch Security Systems, Inc. Operation Manual 2014.05 | 1.0 | F.01U.291.520... - Page 58 Maximum Gain Level Controls the maximum value the gain can have during AGC operation. To set the maximum gain level, choose from: – Normal – Medium – High (default) 2014.05 | 1.0 | F.01U.291.520 Operation Manual Bosch Security Systems, Inc.
- Page 59 – Monochrome: Forces the camera to stay in Nigh Mode and transmit monochrome images. – Color: The camera does not switch to Night Mode regardless of ambient light conditions. Bosch Security Systems, Inc. Operation Manual 2014.05 | 1.0 | F.01U.291.520...
-
Page 60: Lens Settings
Reverse: iris controls are reversed. Auto iris level Increases or decreases brightness according to the amount of light. Type a value between 1 and 15. Maximum zoom speed Controls the zoom speed. 2014.05 | 1.0 | F.01U.291.520 Operation Manual Bosch Security Systems, Inc. -
Page 61: Ptz Settings
Sets the left Auto Pan limit of the camera. Use the preview window to move the camera to the left pan limit and click the button. The camera will not move past this limit when in Auto Pan Between Limits mode (AUX 2 ON). Bosch Security Systems, Inc. Operation Manual 2014.05 | 1.0 | F.01U.291.520... -
Page 62: Illumination/Wiper
Select the number of minutes (from 1 to 30) after which the White light will turn off after activation. IR focus correction Optimizes the focus for IR lighting. Options are: On, Off. Wiper 2014.05 | 1.0 | F.01U.291.520 Operation Manual Bosch Security Systems, Inc. -
Page 63: Scenes And Tours
To remove a scene from the tour, select the scene in the list and uncheck the Include in standard tour box. Select a dwell time from the Standard preposition tour drop-down list. To start the preposition tour: Bosch Security Systems, Inc. Operation Manual 2014.05 | 1.0 | F.01U.291.520... -
Page 64: Sectors
You can set the line output gain with the slider (from 0 (zero) to 79, with 0 as the default). Make sure that the display does not go beyond the green zone during modulation. 2014.05 | 1.0 | F.01U.291.520 Operation Manual Bosch Security Systems, Inc. -
Page 65: Pixel Counter
It is also possible to let the VRM Video Recording Manager control all recording with accessing an iSCSI system. This is an external program for configuring recording tasks for video servers. For further information please contact your local customer service at Bosch Security Systems Inc. - Page 66 Click a storage medium in the Managed storage media list to select it. Click the Remove button below the list. The storage medium is deactivated and removed from the list. 2014.05 | 1.0 | F.01U.291.520 Operation Manual Bosch Security Systems, Inc.
-
Page 67: Recording Profiles
Here you can select the alarm sensor that is to trigger a recording. Virtual alarm Here you can select the virtual alarm sensors that are to trigger a recording, via RCP+ commands or alarm scripts, for example. Bosch Security Systems, Inc. Operation Manual 2014.05 | 1.0 | F.01U.291.520... -
Page 68: Maximum Retention Time
This allows you to apply a schedule for Sundays to other days with dates that fall on varying weekdays. Click the Holidays tab. Any days that have already been selected will be shown in the table. Click the Add button. A new window will open. 2014.05 | 1.0 | F.01U.291.520 Operation Manual Bosch Security Systems, Inc. -
Page 69: Recording Status
IP address. You can enter up to ten IP addresses to which the camera will connect in sequence in the event of an alarm, until a connection is made. Bosch Security Systems, Inc. Operation Manual 2014.05 | 1.0 | F.01U.291.520... - Page 70 VIDOS or Bosch Video Management System, you can store a general password here. The camera can use this general password to connect to all remote stations protected with the same password.
-
Page 71: Vca
Select a VCA configuration and make the required settings. If necessary, click the Default button to return all settings to their default values. Bosch Security Systems, Inc. Operation Manual 2014.05 | 1.0 | F.01U.291.520... - Page 72 Notice! Additional analysis algorithms with comprehensive functions such as IVMD and IVA are available from Bosch Security Systems Inc. If you select one of these algorithms, you can set the corresponding parameters here directly. You can find information on this in the relevant documents on the product CD supplied.
- Page 73 Left-click the fields to be activated. Activated fields are marked yellow. If necessary, click Select All to select the entire video frame for monitoring. Right-click any fields you wish to deactivate. Click OK to save the configuration. Bosch Security Systems, Inc. Operation Manual 2014.05 | 1.0 | F.01U.291.520...
- Page 74 Activate this function if tampering associated with covering the lens (for instance, by spraying paint on it) should trigger an alarm. The average brightness of the scene provides a basis for recognition. 2014.05 | 1.0 | F.01U.291.520 Operation Manual Bosch Security Systems, Inc.
-
Page 75: Virtual Masks
1. Select the number of the Virtual mask. In the video preview window, a dark grey rectangle appears with the text “Mask x,” where ‘x’ is the number of the mask. Bosch Security Systems, Inc. Operation Manual 2014.05 | 1.0 | F.01U.291.520... -
Page 76: Audio Alarm
Select On if you want the device to generate audio alarms. Name The name makes it easier to identify the alarm in extensive video monitoring systems, for example with the VIDOS and Bosch Video Management System programs. Enter a unique and clear name here. Caution! Do not use any special characters, for example &, in the name. -
Page 77: Alarm Task Editor
As an alternative to the alarm settings on the various alarm pages, you can enter your desired alarm functions in script form here. This will overwrite all settings and entries on the other alarm pages. Bosch Security Systems, Inc. Operation Manual 2014.05 | 1.0 | F.01U.291.520... -
Page 78: Alarm Rules
N.C. (Normally Closed) and provide an optional name for each input. 15.40 Alarm Outputs The camera incorporates three (3) open collector alarm or transistor outputs. Use the following settings to configure the relay for alarm outputs. 2014.05 | 1.0 | F.01U.291.520 Operation Manual Bosch Security Systems, Inc. -
Page 79: Advanced Mode: Network
If a DHCP server is employed in the network for the dynamic assignment of IP addresses, you can activate acceptance of IP addresses automatically assigned to the camera. Certain applications (Bosch Video Management System, Archive Player, Configuration Manager) use the IP address for the unique assignment of the unit. If you use these... - Page 80 HTTP browser port, RCP+ port 1756 and Telnet support. This deactivates all unsecured connections. Connections will then only be possible via the HTTPS port. 2014.05 | 1.0 | F.01U.291.520 Operation Manual Bosch Security Systems, Inc.
-
Page 81: Dyndns
To transfer the IP address of the camera, click the Register button. Bosch Security Systems, Inc. Operation Manual 2014.05 | 1.0 | F.01U.291.520... -
Page 82: Advanced
SNMP messages (traps) to IP addresses. The unit supports SNMP MIB II in the unified code. If you wish to send SNMP traps, enter the IP addresses of one or two required target devices here. 2014.05 | 1.0 | F.01U.291.520 Operation Manual Bosch Security Systems, Inc. -
Page 83: Multicast
A special IP address (class D address) must be configured for multicast operation in a multicast-enabled network. The network must support group IP addresses and the Internet Group Management Protocol (IGMP V2). The address range is from 225.0.0.0 to 239.255.255.255. Bosch Security Systems, Inc. Operation Manual 2014.05 | 1.0 | F.01U.291.520... -
Page 84: Image Posting
Select the size of the images that you want to save: – Small – Medium – Large – 720p – 1080p File name You can select how file names will be created for the individual images that are transmitted. 2014.05 | 1.0 | F.01U.291.520 Operation Manual Bosch Security Systems, Inc. -
Page 85: Accounts
Use this setting to configure a filter that allows or blocks network traffic that matches a specified address or protocol. IP Address 1 / 2 Enter the IPv4 address that you want to allow or block Bosch Security Systems, Inc. Operation Manual 2014.05 | 1.0 | F.01U.291.520... -
Page 86: Encryption
Enter the full path of the file to upload or click Browse to navigate to the required firmware file (*.fw). Make certain that the file to be loaded comes from the same unit type as the unit you want to configure. 2014.05 | 1.0 | F.01U.291.520 Operation Manual Bosch Security Systems, Inc. -
Page 87: Licenses
Click the REFRESH button to reload log data. – Low voltage - a drop in incoming power below the level where the camera becomes non- functional – High temperature - the internal temperature exceeds specifications Bosch Security Systems, Inc. Operation Manual 2014.05 | 1.0 | F.01U.291.520... -
Page 88: System Overview
Some devices ship with labels that identify the unique MAC address of each network device. The number on these labels matches the number in the MAC address field of the System Overview for each device. Bosch recommends that you keep the MAC address labels in a safe place for future reference. -
Page 89: Operation
If you do not connect, the unit may have reached its maximum number of connections. Depending on the unit and network configuration, each camera can have up to 50 Web browser connections or up to 100 connections via the Bosch Video Management System (BVMS). -
Page 90: View Control
Sets the pre-set scene for the directions corresponding button 1, 2, 3, 4, 5 and 6 Zoom out¹ Moves the camera to pre-set scene numbers 1, 2, 3, 4, 5 and 6 Zoom in¹ 2014.05 | 1.0 | F.01U.291.520 Operation Manual Bosch Security Systems, Inc. -
Page 91: Aux Control
Some legacy systems may not support presets above 99. In this case, you can set the camera to use only presets 1-99. Enter 151 on the keypad, and then click AUX on. Bosch Security Systems, Inc. Operation Manual 2014.05 | 1.0 | F.01U.291.520... - Page 92 Click the number of the scene you want to view using the on-screen keypad. Click the Show scene button. Notice! For more information about the camera settings and controls, click the Help on this page? link to open the online help. 2014.05 | 1.0 | F.01U.291.520 Operation Manual Bosch Security Systems, Inc.
-
Page 93: Special Functions
You can switch connected units using the relays in the camera (for example, lights or door openers). To activate this, click the icon for the relay next to the video image. The icon will be red when the relay is activated. Bosch Security Systems, Inc. Operation Manual 2014.05 | 1.0 | F.01U.291.520... -
Page 94: System Log/Event Log
JPEG format on your computer's hard drive. The icon for recording single images is only visible if the unit is configured to enable this process. Click the icon. The storage location depends on the configuration of the camera. 2014.05 | 1.0 | F.01U.291.520 Operation Manual Bosch Security Systems, Inc. -
Page 95: Recording
Red bars indicate the points in time where alarms were triggered. Drag the green arrow to navigate to these points quickly. Control playback by means of the buttons below the video image. The buttons have the following functions: Bosch Security Systems, Inc. Operation Manual 2014.05 | 1.0 | F.01U.291.520... - Page 96 Jump to the following bookmark Bookmarks are only valid while in the Recordings page; they are not saved with the sequences. All bookmarks are deleted when leaving the page. 2014.05 | 1.0 | F.01U.291.520 Operation Manual Bosch Security Systems, Inc.
-
Page 97: Using Intelligent Tracking
The camera automatically disables the display of compass headings. Once Intelligent Tracking is set to Off, the camera resumes display of the compass heading. Refer to PTZ Settings, page 61 for details of the Compass feature. Bosch Security Systems, Inc. Operation Manual 2014.05 | 1.0 | F.01U.291.520... - Page 98 Note: If you do not see these controls on the LIVE page, ensure that the Show ‘Tracking’ option is enabled on the LIVE Functions page. Refer to LIVE Functions, page 50. – Off: Disables Intelligent Tracking. 2014.05 | 1.0 | F.01U.291.520 Operation Manual Bosch Security Systems, Inc.
- Page 99 The camera will restart tracking if a target starts moving in the same area where the initial target stopped moving or if the camera detects an object moving along the last known trajectory. Bosch Security Systems, Inc. Operation Manual 2014.05 | 1.0 | F.01U.291.520...
-
Page 100: Recommended Use Of Your Mic Camera
The tour should also include at least 10° of tilt movement. Preset Tours For scenarios that require the camera to be in continuous motion for most of the day, Bosch recommends that you set the camera in Preset Tour mode, moving between a desired set of presets. -
Page 101: Troubleshooting
Video is rolling, noisy, or distorted. – Check the integrity of all connectors and splices of the Ethernet cable. If O.K., then: – Contact Bosch Technical Support. Camera moves when attempting to – Check that the camera’s IP address is properly set. move other cameras. - Page 102 – Check that the maximum Ethernet cable distance has not been exceeded. If O.K., then: – Restore all camera settings. Background is too bright to see Turn on backlight compensation. subject. 2014.05 | 1.0 | F.01U.291.520 Operation Manual Bosch Security Systems, Inc.
-
Page 103: Maintenance
No User-serviceable Parts Except for the external wiper blade, the device contains no user-serviceable parts. Contact your local Bosch service center for device maintenance and repair. In the event of failure, the device should be removed from site for repair. -
Page 104: Decommissioning
(in accordance with the European Waste Electrical and Electronic Equipment Directive). To dispose of old electrical or electronic devices, you should use the return and collection systems put in place in the country concerned. 2014.05 | 1.0 | F.01U.291.520 Operation Manual Bosch Security Systems, Inc. -
Page 105: Technical Data
Technical data | en dynamic 7000 HD Technical data For product specifications, see the datasheet for your camera, available on the appropriate product pages of the Online Product Catalog at www.boschsecurity.com. Bosch Security Systems, Inc. Operation Manual 2014.05 | 1.0 | F.01U.291.520... -
Page 106: Keyboard Commands By Number
Displays all menu default settings. On/Off Playback A, continuous Activates /deactivates continuous Playback A. On/Off Playback A, single Activates /deactivates single Playback A. On/Off Playback B, continuous Activates /deactivates continuous Playback B. 2014.05 | 1.0 | F.01U.291.520 Operation Manual Bosch Security Systems, Inc. - Page 107 On–Enables all alarm rules. Deactivation Off–Disables all alarm rules. Re-initialize Camera Performs camera/lens re-initialization functions. Camera Height Enters the Camera Height menu. On/Off Digital Zoom Lock Turns digital zoom on and off. Bosch Security Systems, Inc. Operation Manual 2014.05 | 1.0 | F.01U.291.520...
- Page 108 Factory P/T Home Position Recalibrates home position; can be used as an Alarm Output. On/Off Record A Activates/deactivates recording A. On/Off Record B Activates/deactivates recording B. Wiper alarm Manual on/off 2014.05 | 1.0 | F.01U.291.520 Operation Manual Bosch Security Systems, Inc.
- Page 109 Enters the Standard Tour Scene menu Shot Edit Tour 2 (Custom) Enters the Custom Tour Scene menu Set/Shot 901-999 Adds/Removes a Preposition Set ###–Adds preset Shot from Tour 1 Shot ###–Removes preset Bosch Security Systems, Inc. Operation Manual 2014.05 | 1.0 | F.01U.291.520...
- Page 112 Bosch Security Systems, Inc. 850 Greenfield Road Lancaster, PA, 17601 www.boschsecurity.com © Bosch Security Systems, Inc., 2014...