Live Functions - Bosch MIC-7130-PB4 Operation Manual
Hide thumbs
Also See for MIC-7130-PB4:
- Quick installation manual (45 pages) ,
- Operation manual (112 pages)
Table of Contents
Advertisement
48
en | Web Interface
15.2
LIVE Functions
On this page you can adapt the functions on the LIVE page to your requirements. You can
choose from a variety of different options for displaying information and controls.
1.
2.
Transmit audio
You can only select this option if audio transmission is actually switched on (see Audio).The
audio signals are sent in a separate data stream parallel to the video data, and so increase the
network load. The audio data are encoded according to G.711 and require an additional
bandwidth of approx. 80 kbps per connection in each direction.
Lease time (s)
The lease time in seconds determines the time beyond which a different user is authorized to
control the camera after no further control signals are received from the current user. After
this time interval, the camera is automatically enabled.
Show alarm inputs
The alarm inputs are displayed next to the video image as icons along with their assigned
names. If an alarm is active, the corresponding icon changes color.
Note: This field is available only when the field Application variant in Installer Menu, page 50
is set to either of the following values:
–
–
Show alarm outputs
Alarm outputs are shown next to the video image as icons, along with their assigned names. If
the alarm output is active, the corresponding icon changes color.
Note: This field is available only when the field Application variant in Installer Menu, page 50
is set to either of the following values:
–
–
Allow snapshots
Here you can specify whether the icon for saving individual images (snapshots) should be
displayed below the live image. Individual images can only be saved if this icon is visible.
Allow local recording
Here you can specify whether the icon for saving (recording) video sequences on the local
memory should be displayed below the live image. Video sequences can only be saved if this
icon is visible.
I-frames only stream
Here you can specify whether the LIVE page displays a viewing tab for an I-frame only stream.
Show preposition list
Here you can specify whether the section Prepositions of the Live page displays a drop-down
box with the list of scenes set in the section Camera > Prepositions and Tours of the
Configuration page.
2016.07 | 5.0 | F.01U.291.520
Check the box for the items that are to be made available on the LIVE page. The selected
items are indicated by a check mark.
Check whether the required functions are available on the LIVE page.
"[camera name] - IO" (for a camera connected to a MIC Alarm/Washer Interface unit
(MIC-ALM-WAS-24))
"[camera name] – VJC-7000" (for a camera connected to a VIDEOJET connect 7000 unit
(VJC-7000-90))
"[camera name] - IO" (for a camera connected to a MIC Alarm/Washer Interface unit
(MIC-ALM-WAS-24))
"[camera name] – VJC-7000" (for a camera connected to a VIDEOJET connect 7000 unit
(VJC-7000-90))
Operation Manual
MIC IP starlight 7000 HD
Bosch Security Systems
- Quick Links:
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
