Related Manuals for Miele DA5341D
Summary of Contents for Miele DA5341D
- Page 1 Operating and Installation Instructions Ventilation System DA 5341 D en - US, CA To prevent accidents and machine damage, read these instructions before installation or use. M.-Nr. 07 262 380...
-
Page 2: Table Of Contents
Contents IMPORTANT SAFETY INSTRUCTIONS....... . . 3 Functional description ..........7 Guide to the hood . -
Page 3: Important Safety Instructions
Read these Operating Instructions carefully before installing or using the Ventilation System. This appliance is intended for residential use only. Use the appliance only for its intended purpose. The manufacturer cannot be held responsible for damages caused by improper use of the hood. - Page 4 However, under certain conditions it may be possible for an installation in these applications. Please contact the nearest Miele dealer or the Miele Technical Service Department with specific requirements. WARNING - TO REDUCE THE RISK...
- Page 5 , WARNING - TO REDUCE THE RISK OF A COOKTOP GREASE FIRE: Never leave surface units unattended at high settings. Boilovers cause smoking and greasy spillovers may ignite. Heat oils slowly on low or medium settings. Always turn the hood on when cooking at high heat.
- Page 6 IMPORTANT SAFETY INSTRUCTIONS Installation , WARNING To reduce the risk of fire only use metal ductwork. Any fittings, sealant, or materials used to install the ductwork must be made of approved non-flammable materials. Provided a larger distance is not given by the manufacturer of the cooktop, follow the minimum safety distances between a cooktop and the bottom of the hood:...
-
Page 7: Functional Description
Functional description The ventilation hood works by air extraction. The air is drawn in and cleaned by the grease filter and directed outside. The hood comes equipped with a non-return flap in each chimney. This flap automatically closes when the hood is turned off so that no exchange of outside air and room air can occur. -
Page 8: Guide To The Hood
Guide to the hood... -
Page 9: Overhead Lighting
a Cover frame b Chimney c Canopy d Overhead lighting e Control panel The two sides of the hood can be operated independently of one another. f Grease filters g Light button This button turns the light on and off and also dims the light. -
Page 10: Operation
Operation The two sides of the hood can be operated independently of one another. Turning on the fan ^ Press the On/Off button. The hood turns on level 2 and the indicator lights. Selecting the power level ^ Use the "–/+" controls to select the desired power level. - Page 11 If the power level indicators "1" and "4" flash, the automatic switch back is not activated. ^ To activate the automatic switch back press the "+" button. The power level indicators "1" and "4" light continuously. ^ To deactivate press the "–" button. ^ To save the setting press the "Delay Shut Down"...
-
Page 12: Delayed Shut Down
Operation Delayed Shut Down If odors or smoke remain in the kitchen after cooking has been completed, the Delayed Shut Down feature can be selected to allow the hood to continue running for either 5 or 15 minutes. After that period of time the fan turns off automatically. -
Page 13: Turning The Lighting On/Off
Turning the lighting on/off The overhead lighting can be turned on and off independently of the fan. ^ Press the light button briefly to turn on the lighting. The light button indicator illuminates. ^ Press the light button briefly again to turn off the lighting. -
Page 14: Grease Filter Timer
Operation Grease filter timer A timer monitors the hours of fan operation. The indicator for the grease filter will light after 30 hours of operation or the preselected time. The grease filters must then be cleaned. See "Cleaning and care / Grease Filter". After the grease filters have been cleaned and put back in place, the grease filter timer must be reset. - Page 15 Reprogramming the grease filter timer The grease filter timer is preset to 30 hours. This time can be lengthened or shortened to 20, 30, 40 or 50 hours. – A time of 20 hours should be programmed in kitchens with frequent pan or deep frying.
-
Page 16: Cleaning And Care
Cleaning and care Before cleaning or servicing the hood, disconnect it from the power supply by either removing the fuse, unplugging it from the outlet or manually "tripping" the circuit breaker. Cleaning the casing Never use on the hood: - cleaning agents containing soda, acids, chlorides or thinners, - abrasive cleaning agents e.g. -
Page 17: Grease Filters
Grease filters The reusable metal grease filters remove solid particles from the vented kitchen air (grease, dust, etc). The grease filters should be cleaned every 3 - 4 weeks or whenever the grease filter indicator lights. Keep the grease filters clean to prevent a fire hazard. - Page 18 Cleaning and care Cleaning the grease filters ^ By hand: use a scrub brush with a solution of warm water and mild detergent. Do not use the pure detergent, aggressive all purpose cleaners, oven sprays, abrasive cleaning agents or limescale removers. They could destroy the filter.
-
Page 19: Changing The Light Bulbs
Changing the light bulbs Disconnect the exhaust hood from the power supply by either shutting off the main breaker or completely removing the fuse. Note: The appliance has 2 electrical connections, each must be disconnected from the main power supply. When in use halogen bulbs become extremely hot, and can burn your hands. -
Page 20: After Sales Service
Miele’s Service department, Extended Service Contracts offered by other providers for Miele products will not be recognized by Miele. Our goal is to prevent unauthorized (and untrained) service personnel from working on your Miele products, possibly doing further damage to them, you and/or your home. -
Page 21: Installation Instructions
Installation Instructions... -
Page 23: Caring For The Environment
Disposal of packing material The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Please recycle. To prevent suffocation of children, ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of their reach. -
Page 24: Appliance Dimensions
Appliance dimensions Exhaust connection 2 x 6" (2 x 150 mm) diameter 1) Opening for ductwork and power cord... -
Page 25: Installation
Installation Do not install this exhaust hood over cooktops burning solid fuel. Provided a larger distance is not given by the manufacturer of the cooktop, follow the minimum safety distances between a cooktop and the bottom of the hood: 22" (550 mm) above electric cooktops, 30"... -
Page 26: Structural Support
Structural support The ceiling mounting plate will support the weight of the hood. This ceiling plate must be attached to rigid structural framing that is supported in its entirety by the ceiling joists, or to the ceiling joists directly. Do not attach the plate directly to the ceiling with anchors, toggle bolts, etc. -
Page 27: Installation Accessories
Installation instructions ^ See the enclosed installation instruction sheet. ^ Please read the "Important Safety Instructions" and Installation instructions before installing this hood. Installation accessories 8 Screws 8 x 60 mm with 8 Washers for securing the ceiling plate. (S8 wall anchors included in the packaging are not for use in USA) 4 Screws M 4 x 8 mm for adjusting the chimney. -
Page 28: Air Extraction
" per foot (1 cm per meter) to prevent condensation dripping into the appliance. – If the exhaust is ducted through an outside wall, a Miele Telescopic Wall Vent can be used. -
Page 29: Condensate Trap
– If the exhaust is ducted into an inactive flue, the air must be expelled parallel to the flow direction of the flue. Never connect an exhaust hood to an active chimney, dryer vent, flue, or room venting ductwork. Seek professional advice before connecting an exhaust hood vent to an existing, inactive chimney or vent... -
Page 30: Electrical Data
If there is any question concerning the electrical connection of this appliance to your power supply, please consult a licensed electrician or call Miele’s Technical Service Department. See back cover for contact information. WARNING: THIS APPLIANCE MUST BE... - Page 32 Alteration rights reserved / 0908 M.-Nr. 07 262 380 / 00 For the most updated manual see the Miele web site.