Miele DA 5321 W Operating And Installation Instructions
Miele ventilation system operating and installation instructions
Hide thumbs
Also See for DA 5321 W:
- Product dimensions (2 pages) ,
- Operating and installation manual (40 pages) ,
- Operating and installation instructions (36 pages)
Related Manuals for Miele DA 5321 W
Summary of Contents for Miele DA 5321 W
- Page 1 Operating and Installation Instructions Ventilation System DA 5321 W DA 5381 W DA 5391 W en - US, CA To prevent accidents and machine damage, read these instructions before installation or use. M.-Nr. 07 100 651...
-
Page 2: Table Of Contents
Contents IMPORTANT SAFETY INSTRUCTIONS Functional description Guide to the appliance Operation Turning on the fan ..........10 Selecting the power level. -
Page 3: Important Safety Instructions
Read these Operating Instructions carefully before installing or using the Ventilation System. This appliance is intended for residential use only. Use the appliance only for its intended purpose. The manufacturer cannot be held responsible for damages caused by improper use of the hood. - Page 4 However, under certain conditions it may be possible for installation in these applications. Please contact the nearest Miele dealer or the Technical Service Department with specific requirements. Before servicing or cleaning the unit,...
- Page 5 , WARNING - TO REDUCE THE RISK OF A COOKTOP GREASE FIRE: Never leave surface units unattended at high settings. Boilovers cause smoking and greasy spillovers may ignite. Heat oils slowly on low or medium settings. Always turn the hood on when cooking at a high heat.
- Page 6 IMPORTANT SAFETY INSTRUCTIONS Installation , WARNING To reduce the risk of fire only use metal ductwork. Provided a larger distance is not given by the manufacturer of the cooktop, follow the minimum safety distances between a cooktop and the bottom of the hood: –...
-
Page 7: Functional Description
Functional description The ventilation hood works by air extraction. The air is drawn in and cleaned by the grease filter and directed outside. The hood comes equipped with a non-return flap. This flap automatically closes when the hood is turned off so that no exchange of outside air and room air can occur. -
Page 8: Guide To The Appliance
Guide to the appliance... -
Page 9: Grease Filter
a Chimney extension b Chimney c Canopy d Grease filter e Control panel f Overhead lighting g Light button This button turns the light on and off and also dims the light. The lighting can be used independently from the fan. h On/Off button i Fan power selection Four fan speed selection... -
Page 10: Turning On The Fan
Operation Turning on the fan ^ Press the On/Off button. Selecting the power level ^ Use the "– / +" controls to select the desired power level. + = increases the fan speed - = decreases the fan speed Level "1" to "3" (green indicators) are usually sufficient for normal cooking. - Page 11 If the power level indicators flash the automatic switch back is not activated. ^ To activate the automatic switch press the "+" button. The power level indicators light. ^ To deactivate the automatic switch press the "–" button. ^ To save the setting press the Delay Shut down button.
-
Page 12: Delayed Shut Down
Operation Delayed Shut Down If odors or smoke remain in the kitchen after cooking has been completed, the Delayed Shut Down feature can be selected to allow the hood to continue running for either 5 or 15 minutes. ^ Press the Delayed Shut Down button while the fan is still running. -
Page 13: Turning The Lighting On/Off
Turning the lighting on/off The overhead lighting can be turned on and off independently from the fan. ^ Press the light button briefly to turn on the lighting. The light button indicator illuminates. ^ Press the light button briefly again to turn off the lighting. -
Page 14: Filter Timers
Operation Filter timers A timer monitors the hours of fan operation. The indicator for the grease filter will light after 30 hours of operation. The grease filters must then be cleaned. After the grease filters have been cleaned and put in place, the grease filter timer must be reset. -
Page 15: Reprogramming The Timers
Reprogramming the timers The grease filter timer is preset to 30 hours. This time can be lengthened or shortened to 20, 30, 40, or 50 hours. – A time of 20 hours should be programmed in kitchens with frequent pan or deep frying. –... -
Page 16: Cleaning And Care
Cleaning and Care Before cleaning or servicing the hood, disconnect it from the power supply by either removing the fuse, unplugging it from the outlet, or manually "tripping" the circuit breaker. Cleaning the casing Warning: Never use abrasive cleaners, scouring pads, steel wool or caustic (oven) cleaners on the hood. -
Page 17: Grease Filters
Grease filters The reusable metal grease filters remove solid particles from the vented kitchen air (grease, dust, etc). The grease filters should be cleaned every 3 - 4 weeks or when the grease filter indicator lights. A dirty filter is a fire hazard. ^ To remove the grease filters pull the locking clips, 1, forward. -
Page 18: Changing The Light Bulb
Cleaning and Care Changing the light bulb Before changing the light bulbs, disconnect the hood from the power supply by either removing the fuse, unplugging it, or manually "tripping" the circuit breaker. When in use halogen bulbs become extremely hot, use caution. Do not attempt to change the bulbs until they have had sufficient time to cool. -
Page 19: After Sales Service
Miele’s Service department, Extended Service Contracts offered by other providers for Miele products will not be recognized by Miele. Our goal is to prevent unauthorized (and untrained) service personnel from working on your Miele products, possibly doing further damage to them, you and/or your home. -
Page 21: Installation Instructions
Installation Instructions... -
Page 23: Caring For The Environment
Disposal of packing material The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Please recycle. To prevent suffocation of children, ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of their reach. -
Page 24: Installation Accessories
Installation accessories... -
Page 25: Installation
3 protective shields to prevent scratches to the chimney during installation. 2 hose clips for securing the ducting. 1 reducing collar for use with 5" (125 mm) exhaust ducting. Telescopic retaining plate secures the chimney extension Caution: During the installation process, please be careful of sharp edges. -
Page 26: Appliance Dimensions
Appliance dimensions 1) and 2) Installation area Wall/ceiling area respectively for vent hole and outlet installation. Vent hole 5 " (150 mm) with reducing collar 5" (125 mm). -
Page 27: Appliance Dimensions
Do not install this exhaust hood over cooktops burning solid fuel. Provided a larger distance is not given by the manufacturer of the cooktop, follow the minimum safety distances between a cooktop and the bottom of the hood: - 22" (550 mm) above electric cooktops, - 30"... -
Page 28: Installation Instructions
Installation Installation instructions ^ See the enclosed installation instruction sheet. ^ Please read the "Important Safety Instructions" and Installation instructions before installing this hood. Protective film The casing is covered with a protective film to prevent scratching during transport. ^ Peel off the film before installing the casing parts. -
Page 29: Plywood Backing
The majority of the weight of the installed ventilation system will be supported by the lower retaining plate. It must be firmly attached to the stud framing behind the drywall. If studs are not available in the required locations, a plywood backing (min. -
Page 30: Air Extraction
" per foot (1 cm per meter) to prevent condensation dripping into the appliance. – If the exhaust is ducted through an outside wall, a Miele Telescopic Wall Vent can be used. -
Page 31: Condensate Trap
– If the exhaust is ducted into an inactive flue, the air must be expelled parallel to the flow direction of the flue. Never connect an exhaust hood to an active chimney, dryer vent, flue, or room venting ductwork. Seek professional advice before connecting an exhaust hood vent to an existing, inactive chimney or vent... -
Page 32: Electrical Connection
If there is any question concerning the electrical connection of this appliance to your power supply, please consult a licensed electrician or call Miele’s Technical Service Department. See back cover for contact information. WARNING:... - Page 33 Important (Canada only) To increase security before the machine is installed, it is recommended to install a protective switch (30 mA). Important (Canada only) The hood must be hard wired accordingly: Black/Red wire:..connect to L1 (live) White wire: .
- Page 36 Alteration rights reserved / 4607 M.-Nr. 07 100 651 / 02 For most the updated manual see the Miele web site.