Bosch B20CS5 Series Operating, Care And Installation Instructions Manual page 23
Hide thumbs
Also See for B20CS5 Series:
Table of Contents
Advertisement
Available languages
Available languages
Unscrewing
the doors
If the appliance
wilt not fit through
the house door, the appliance
doors
can be unscrewed.
We recommend
that installation
is
carried out by our customer
service.
Unscrewing
the
freezer
compartment
door
[3
Remove lower cover.
[3
Loosen the hose connection:
Loosen the hose clips on
the hose connection.
C3 Disconnect
the electrical
plug and socket
connections
(2).
[3
While holding the door, unscrew
the hinge screws on top (3).
Connecting
the
appliance
to the water
supply
The water may be connected
only by
a competent
fitter according
to the
local regulations
of the appropriate
water supply company.
Connect
the appliance
to a cold
water line.
Minimum
pressure:
20 p.s.i. (1.4 bar)
Maximum
pressure up to
100 p.s.i. (6.9 bar)
The tap for connection
of the water
line should be freely accessible.
C3 Loosen the screws and remove
the motor compartment
cover.
C3
Press the clamping
ring in
the direction of the arrow
and simultaneously
pull the
hose out of the hose
connection.
Remove the upper hinge
cover (1).
C3 Lift the door off the lower hinge
pin.
Remove
and deposit
the door
with care! Do not damage
the
water
line.
Unscrewing
the
refrigerator
compartment
door
C3 Unscrew the refrigerator
compartment
door in the same
way (the refrigerator
compartment
door does not
feature any electrical
plug and socket connections
or
hose connections).
Warning:
Before installing the doors in reverse
sequence,
ensure that the appliance
is level in the installation
location.
[3
Connect
the connecting
line to
the solenoid
valve (1/4").
C3 Connect
the connecting
line to
the tap.
C3 Using the clip, attach the
connecting
line to the rear panel
of the appliance.
[3
Place the connecting
line in
loops or coils so that the
appliance
can be moved away
from the watt.
23
Hide quick links:
Advertisement
Chapters
Table of Contents
