Table of Contents
Advertisement
Rexroth Frequency Converter EFC x610
Series
13.4.35 Error 54 (PcE-): Remote Control Communication Error
Possible reason
Error if communication to IndraWorks Ds/
ConverterWorks is lost during remote control
13.4.36 Error 55 (PbrE): Parameter Backup / Restore Error
Possible reason
Error occurs during parameter backup/
restore process
13.4.37 Error 56 (PrEF): Parameter Restore Error after Firmware Update
Possible reason
Error occurs if parameter settings cannot be
restored after firmware update
13.4.38 Error 60 (ASF-): Application Firmware Error
Possible reason
The application firmware was not loaded cor-
rectly or trail use is over
13.4.39 Error 61...65 (APE1...APE5): Application Error
Possible reason
Application error
Solution
Check communication status between frequency
●
converter and IndraWorks Ds/ConverterWorks
Contact with service
●
Solution
Parameter backup/restore process is interrupted
●
Restart backup/restore process
Converter firmware version which is back up is in-
●
compatible with the version which is restored
Solution
Parameters recover failed after firmware update from
low version to high version
Reset the error, set customer parameters again after
initialization
Solution
Currently converter firmware is not support this ap-
●
plication firmware
– Reload the application firmware version which
is supported by the converter
– Update the converter firmware to the version
which support this application firmware
The application firmware is not certificated
●
Certificate this application firmware
Solution
Error which can be thrown by the application, descrip-
tion in application manual
R912005854_Edition 09 Bosch Rexroth AG
481/653
Diagnosis
Advertisement
Table of Contents
