Table of Contents
Advertisement
12/135
Bosch Rexroth AG | Electric Drives
Important Instructions on Use
2.2
Inappropriate Use
2.3
ESD notes
CAUTION
and Controls
The application of the BTV 20.4A that are not within the specified areas of ap‐
plication or under operating conditions deviating from the operating conditions
and technical data specified in the documentation is considered as "inappro‐
priate".
The BTV 20.4A may not be used if...
●
it is exposed to operating conditions that do not fulfill the ambient condi‐
tions specified For instance, operation under water, in case of extreme
variations of temperature or in extreme maximum temperatures is not al‐
lowed.
●
Bosch Rexroth has not explicitly released the intended applications. It is
imperative that you also note the information given in the general notes
on safety!
Electrostatically charged persons/tools that are discharged via the controller or
printed circuit boards can damage these components. Therefore do observe
the following notes:
Risk of damage to the electronic components and deterioration of their
operating safety by electrostatic charges!
⇒ Bodies coming into contact with components and printed circuit boards must
be discharged by grounding. Otherwise, errors in the control can occur.
Examples for such bodies:
●
when soldering, the soldering iron
●
your own body (grounding by contact with a conductive, grounded object)
●
parts and tools (when deposited on a conductive surface)
Components exposed to this risk may only be stored and dispatched in a con‐
ductive packaging.
Rexroth MTA 200 | Project Planning Manual
- Quick Links:
- System Concept
Hide quick links:
Advertisement
Table of Contents
