Table of Contents
Advertisement
Project Planning Manual | Rexroth MTA 200
2
Important Instructions on Use
2.1
Appropriate Use
2.1.1
Introduction
2.1.2
Areas of Use and Application
Bosch Rexroth products represent state-of-the-art developments and manu‐
facturing. They are tested prior to delivery to ensure operational safety and
reliability.
Therefore the products may only be used for the intended purpose. If they are
not used as intended, situations causing personal injury as well as material
damage can occur.
Rexroth disclaims as manufacturer any warranty, liability or dam‐
ages occurring due to inappropriate use of the products. Further‐
more, Rexroth is not paying any compensation; the user is
responsible for any risks resulting from inappropriate use of the
products.
Before using Bosch Rexroth products, the following requirements must be met
to ensure appropriate use of the products:
●
Anyone handling one of the Rexroth products in any way has to read and
understand the respective safety-related guidelines as well as the instruc‐
tions on appropriate use.
●
Hardware products have to remain in their original state, i. e. no modifi‐
cation regarding the design is allowed. Software products must not be
decompiled and their source codes must not be modified.
●
Damaged or faulty products must not be implemented or put into opera‐
tion.
●
It must be ensured that the products are installed as specified in the doc‐
umentation.
For BTV 20.4A Bosch Rexroth defines appropriate use for installation into a
control panel, into the wall or door of a control cabinet or directly into the en‐
closure of a machine tool. It may only be operated under the assembly and
installation conditions, in the position of application and under the ambient con‐
ditions (temperature, degree of protection, humidity, EMC, etc.) specified in this
documentation.
The BTV 20.4A may only be used in the configurations described in this doc‐
umentation. For appropriate use the application of software and firmware
offered by Bosch Rexroth for the MTA 200 control system and the application
of digital Bosch Rexroth servo drives and main spindle drives of the Diax 04
family with corresponding servo or main spindle firmware is required.
Every MTA 200 control system is to be parameterized and programmed cor‐
respondingly before its commissioning by skilled staff.
Typical applications of MTA 200 control system are machine tools for the fol‐
lowing processing technologies:
●
Milling and grinding crankshafts
●
Grinding camshafts
●
Gear wheel processing
Electric Drives
| Bosch Rexroth AG
and Controls
Important Instructions on Use
11/135
- Quick Links:
- System Concept
Hide quick links:
Advertisement
Table of Contents
