Lens Settings - Bosch Starlight 7000 HD Operation Manual
Mic ip starlight 7000 hd / mic ip dynamic 7000 hd series
Hide thumbs
Also See for Starlight 7000 HD:
- Installation manual (56 pages) ,
- Manual (10 pages) ,
- Quick manual (7 pages)
Table of Contents
Advertisement
60
en | Configuration via IP, Advanced Mode
–
Night mode threshold
Adjusts the level of light at which the camera automatically switches out of night mode (B/W)
operation. Select a value between 10 and 55 (in increments of 5; default 30). The lower the
value, the earlier the camera will switch to color mode.
Noise Reduction
Turns on the 2D and 3D noise reduction feature.
Noise Reduction Level
Adjusts the noise level to the appropriate level for shooting conditions. Select a value between
1 and 5.
Anti-fog
With the anti-fog mode feature, visibility can be improved significantly when viewing foggy or
other low-contrast scenes.
–
–
–
15.16
Lens Settings
Autofocus
Continuously adjusts the lens automatically to the correct focus for the sharpest picture.
–
–
–
Focus polarity
–
–
Focus speed
Use the slider (from 1 to 8) to control how fast the Auto focus will readjust when the focus
becomes blurred.
Auto iris
Automatically adjusts the lens to allow the correct illumination of the camera sensor. This type
of lens is recommended for use where there are low light or changing light conditions.
–
–
Iris polarity
Capability to reverse the operation of the iris button on the controller.
–
–
Auto iris level
Increases or decreases brightness according to the amount of light. Type a value between 1
and 15.
Maximum zoom speed
Controls the zoom speed.
2014.09 | 1.3 | F.01U.291.520
Auto (default): The camera switches out of Night Mode after the ambient light level
reaches a pre-defined threshold.
On - Anti-fog is always active.
Off - Anti-fog is disabled.
Auto - Anti-fog activates automatically as needed.
One Push (default; commonly called "Spot Focus"): activates the Auto Focus feature after
the camera stops moving. Once focused, Auto Focus is inactive until the camera is moved
again.
Auto Focus: Auto Focus is always active.
Manual: Auto Focus is inactive.
Normal (default): focus controls operate normally.
Reverse: focus controls are reversed.
Constant (default): camera constantly adjusts to varying light conditions (default).
If you select this option, the camera makes the following changes automatically:
–
Gain Control: switches to AGC.
–
Shutter Speed: switches to default.
Manual: camera must be manually adjusted to compensate for varying light conditions.
Normal (default): iris controls operate normally.
Reverse: iris controls are reversed.
Operation Manual
MIC IP starlight 7000 HD, MIC IP
dynamic 7000 HD
Bosch Security Systems
- Quick Links:
- Configuring the Camera
Hide quick links:
Advertisement
Table of Contents
