Table of Contents
Advertisement
2. Remove paper from the paper support and paper exit tray.
3. Dampen a clean, lint-free cloth with water.
NOTICE:
Do not use household cleaners or detergents, as they may damage the finish of the printer.
4. Wipe only the outside of the printer, making sure to remove any ink residue that has accumulated on the paper exit
tray.
NOTICE:
Using a damp cloth to clean the interior may cause damage to your printer. Damage to the printer
caused by not following the correct instructions for cleaning will not be covered under warranty.
5. Make sure the paper support and paper exit tray are dry before beginning a new print job.
Changing the Default Operator Panel Settings
To change the default settings on the operator panel:
1. Turn on the printer.
2. Change the operator panel settings.
3. Use the left and right Arrow buttons
4. Use the left and right Arrow buttons
5. Use the left and right Arrow buttons
6. Use the left and right Arrow buttons
The current settings on the operator panel are saved as the new default settings.
Restoring Factory Default Settings
1. Turn on the printer.
2. From the operator panel, use the left and right Arrow buttons
button
.
3. Use the left and right Arrow buttons
4. Use the left and right Arrow buttons
5. Use the left and right Arrow buttons
6. Select the correct language and country.
to scroll to SETUP, and then press the Select button
to scroll to Defaults, and then press the Select button
to scroll to Set Defaults, and then press the Select button
to scroll to Use Current, and then press the Select button
to scroll to Defaults, and then press the Select button
to scroll to Set Defaults, and then press the Select button
to scroll to Use Factory, and then press the Select button
to scroll to SETUP, and then press the Select
.
.
.
.
.
.
.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
