Bosch UniversalRotak 470 Instructions Manual page 13
Hide thumbs
Also See for UniversalRotak 470:
- Original instructions manual (231 pages) ,
- Original instructions manual (191 pages) ,
- Original instructions manual (268 pages)
Table of Contents
Advertisement
Available languages
Available languages
the machine to and from the area to
be mowed.
Do not tilt the machine when starting
u
or switching on the motor.
Switch on the motor according to the
u
instructions with feet well away from
rotating parts.
Do not put hands or feet near or un-
u
der rotating parts.
Always stand clear of the discharge
u
zone when operating the machine.
Never pick up or carry the machine
u
while the motor is running.
When storing, make sure that all 4
u
wheels of the garden tool stand on
the ground/floor.
Only lift the garden tool with the car-
u
rying handle. Use the carrying handle
with care.
Do not modify the machine. Unau-
u
thorized modifications can impair
the safety of your machine, lead to
increased noise and vibrations, and
poor performance.
Regularly inspect the supply cable
u
and any extension cables. Do not
connect damaged cables to the sup-
ply or touch a damaged cable before
it is disconnected from the supply. A
damaged cable can lead to contact
with live parts. Beware electric
shock hazard.
Leaf Collect
The leaf collect blade has been de-
signed to allow you to pick up autumn
leaves from your lawn. In order for this
Bosch Power Tools
functionality to work within optimal
parameters, please note the following:
– Only collect leaves with the ma-
chine set at maximum cutting
height.
– Collect leaves from your lawn only.
– Before collecting leaves inspect
the area where the machine is to
be used and keep people, pets,
glass structures and cars away
from use.
Remove the plug from the socket:
– Whenever you leave the machine.
– Before clearing a blockage.
– Before checking, cleaning or work-
ing on the machine.
– After striking a foreign object. In-
spect the machine for damage and
change the blade as necessary.
– If the machine starts to vibrate ab-
normally (check immediately).
Connecting to the mains
The voltage of the power source
u
must correspond with the data on
the type plate of the product.
We recommend that this product is
u
only connected into a socket which
is protected by a circuit-breaker that
would be actuated by a 30 mA resid-
ual current.
Only use or replace power supply
u
cables for this unit which correspond
to the types indicated by the manu-
facturer. See the operating instruc-
tions for the order no. and types.
English | 13
1 609 92A 5W7 | (15.07.2020)
- Quick Links:
- English
Hide quick links:
Advertisement
Table of Contents
