Summary of Contents for Miele DA 4228 W Puristic Plus
Page 1
Operating and installation instructions Cooker hood To prevent the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time. en-SA M.-Nr. 11 474 650...
Modes of operation ................... 16 Before using for the first time ................17 Selecting Extraction mode .................. 17 Setting up Miele@home ..................17 Connecting via the app .................. 18 Connecting via WPS ..................19 Sign out of WiFi (reset to factory settings) ............. 20 Setting up Con@ctivity ..................
Page 3
Contents Grease filters ....................... 33 The charcoal filter symbol lights up during use......... 35 Replacing the grease filters ................35 Service........................ 36 Contact in case of malfunction ................36 Position of the data plate ..................36 Guarantee......................36 Installation......................37 Before installation....................
Miele cannot be held liable for injury or damage caused by non- compliance with these instructions. Keep these instructions in a safe place and pass them on to any future owner.
Page 5
Warning and Safety instructions The cooker hood can only be used by people with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, if they are supervised whilst using it, or have been shown how to use it in a safe way and recognise and understand the consequences of incorrect operation.
Page 6
Unauthorised installation, maintenance and repairs can cause considerable danger for the user. Installation, maintenance and repairs must only be carried out by your Miele dealer. A damaged appliance can be dangerous. Check it for visible signs of damage. Do not use a damaged appliance.
Page 7
Miele authorised technician. The LED lamps are a built-in component of the lighting. Replacement LED lamps may only be fitted by a Miele authorised technician or by the Miele Customer Service Department. If the electrical connection cable is faulty it must only be replaced by a Miele authorised technician to protect the user from danger.
Page 8
Warning and Safety instructions Using at the same time as another heating appliance that depends on the air from the room Danger of toxic fumes! Great care should be taken when using the cooker hood in the same room or the same area of the house at the same time as another heating appliance that depends on the air from the room.
Page 9
Warning and Safety instructions In order to ensure safe operation and to prevent gases given off by the heating appliance from being drawn back into the room, when the cooker hood and the heater are both operated simultaneously, an underpressure in the room of 0.04 mbar (4 Pa) is the maximum permissible.
Page 10
Warning and Safety instructions Correct use Open flames are a fire hazard. The use of an open flame under the cooker hood is not permitted. To avoid the danger of fire, do not flambé or grill over an open flame. When switched on, the cooker hood could draw flames into the filter.
Page 11
The information provided in “Installation” must be observed when fixing the ventilation hood. Components can have sharp edges which may cause injury. Wear gloves to protect your hands from being cut. Exhaust ducting must be of non-inflammable material. Suitable material is available from your Miele dealer.
Page 12
The steam could reach electrical components and cause a short circuit. Accessories and spare parts Only use genuine original Miele accessories and spare parts with this appliance. Using accessories or spare parts from other manufacturers will invalidate the guarantee, and Miele cannot accept liability.
Use household waste. material-specific collection points for valuable materials and take advantage of return options. Your Miele dealer will take the packaging material away. Please dispose of it at your local community waste collection / recycling centre or contact your Miele dealer for advice.
Page 15
Guide to the cooker hood a Telescopic extension piece b Tower c Canopy d Control elements e Grease filters f Hob lighting g Control for switching the lighting on and off and for dimming the lighting h Control for switching the fan on and off i Controls for setting the fan power level j Control for the run-on function k Control for the operating hours counter...
Modes of operation Depending on the model of the cooker hood, the following options are available: Extraction mode The air is drawn in and cleaned by the grease filters and directed outside.
Miele app. Confirm your choice with the operating hours control . If your Miele hob is connected to a home WiFi network, you can control the All the indicator lights will go out. cooker hood automatically via the Extraction mode has now been set.
Start signing the appliance on in the Connecting via the app app. Follow the signing-on instructions. The Miele app can be used to connect to your network. If requested to activate WiFi on the cooker hood, proceed as follows: ...
Before using for the first time Switch the cooker hood off. Connecting via WPS Your WiFi router must support WPS (WiFi Protected Setup). Press and hold the control. Switch the cooker hood off. Press the lighting control at the same ...
WPS on your The cooker hood will be ready for router quickly enough. Repeat the steps disconnection in the next 2 minutes. above. Tip: If your WiFi router does not support WPS, please connect via the Miele app.
Con@ctivity is the direct communication Touch the control. system between an electric Miele hob and a Miele cooker hood. It enables the cooker hood to operate automatically depending on the operational state of a 2 will light up constantly, 3 will flash on Miele hob with onset controls.
With a direct WiFi connection, it is not Prerequisite: possible to connect the hob and the - WiFi enabled Miele hob cooker hood to a home network. Should this be required at a later date, If you do not have a home network, you...
Operation (Automatic mode) When Con@ctivity is active, the cooker hood always operates in automatic mode (see “Before using for the first time” – “Setting up Con@ctivity”). If you wish to manually operate the cooker hood, see “Operation (Manual mode)” – “Cooking without Examples for power levels 1 to B Con@ctivity”.
Operation (Automatic mode) Cooking process Switching off For example, you switch on a cooking Switch off all cooking zones. zone at the highest power level to The cooker hood fan will reduce its heat a pan for frying. You reduce the power level in stages over the next few power level after approx.
Operation (Automatic mode) You can also operate the cooker hood Leaving automatic mode manually for a complete cooking temporarily process. To leave automatic mode temporarily Switch the cooker hood fan on during cooking: before the hob. Manually select a different fan power If the cooker hood fan and the hob have level, or been switched off for at least...
Operation (Manual mode) Cooking without Con@ctivity Selecting the run-on time (Manual mode) It is advisable to run the fan for a few minutes after cooking has finished. This The cooker hood can be operated helps to remove any lingering vapours manually if: and odours from the air.
Operation (Manual mode) Dimming/switching the hob Power management lighting on/off The cooker hood is fitted with a power management system. Power The hob lighting can be switched on management helps to save energy. It and off and dimmed independently of ensures that the fan power level is the fan.
Operation (Manual mode) Activating/deactivating Power Safety switch-off Management If Power management has been Switch off the fan and the lighting. deactivated, the cooker hood will switch itself off automatically after Press the fan run-on control for 12 hours if it has been left on (fan and approx.
Operation (Automatic and Manual modes) Switch off the fan and the lighting. Operating hours counter Press the run-on control and the The cooker hood registers the length of operating hours control at the time it has been operated. same time.
Operation (Automatic and Manual modes) Reading the filter operating hours counter You can check the percentage of time set already used before the filter needs replacing. Switch the fan on with the On/Off control . Press and hold the operating hours control : The grease filter symbol ...
Energy saving tips This cooker hood operates very - Use the Con@ctivity function. The efficiently and economically. The cooker hood will switch on and off following will help you to save even automatically at the optimum power more energy when using it: level for the cooking you are doing, which ensures low energy - Ensure that there is sufficient...
Unsuitable cleaning agents can becoming dirty again, we recommend damage the surfaces and control treating them with a stainless steel care elements. product (available from Miele). Do not use any cleaning agents containing soda, acid, chloride or Important information for appliances solvent.
Cleaning and care Removing a grease filter Grease filters When handling a grease filter, be Fire hazard careful not to drop it. Oversaturated grease filters are a fire This can result in damage to the filter hazard. and the hob below. Clean the grease filters at regular Make sure you hold the filter securely intervals.
Page 34
Cleaning and care When removing the filters for Unsuitable cleaning agents cleaning, also clean off any residues Unsuitable cleaning agents can cause of oil or fat from the now accessible damage to the surface of the filters if housing to prevent the risk of these used regularly.
If you identify any damage, replace the grease filters. Grease filters are available to order via the Miele Customer Service Department (see end of these operating instructions for contact details) or from your Miele dealer.
In the event of any faults which you cannot remedy yourself, please contact your Miele dealer. Contact details for your Miele dealer are given at the end of this document. Please note that telephone calls may be monitored and recorded for training...
*INSTALLATION* Installation Before installation Before installation, it is important to read the information given on the 1 non-return flap following pages as well as the for fitting into the exhaust socket on “Warning and Safety instructions” at the motor unit. Depending on the the beginning of this booklet.
*INSTALLATION* Installation ab The shaded area represents the wall or ceiling area for the vent cut-out and for fitting the connection socket. Connection for air extraction 150 mm Safety distance between hob and cooker hood (S) When planning the installation height of your cooker hood, the minimum safety distance between the top of a cooker or hob and the bottom of the cooker hood is as follows, unless a greater distance is specified by the manufacturer of your cooking appliance.
*INSTALLATION* Installation Installation recommendations Drilling diagram for wall mounting - When deciding on the safety distance between the hob and cooker hood, When drilling, please follow the please note that a distance of directions contained on the 650 mm above electric cookers/hobs accompanying installation sheet.
*INSTALLATION* Installation Connection for air extraction Any constriction of the air throughput will reduce extraction performance If the cooker hood is used at the and increase operating noise. same time as a heating appliance that relies on oxygen from the same Flue room, there is a risk in certain circumstances of toxic fumes...
If the exhaust is ducted through an outside wall, a Miele wall vent or roof vent (available as an optional accessory) is recommended. Both of these have a built-in non-return flap.
For this reason, the silencer must be a specific mains connection cable of positioned as close as possible to the the same type (available from the Miele ducting exit . Customer Service Department). For safety reasons, such replacement may...
Page 44
The function and operation of the protective measures provided in the domestic electrical installation and in this Miele product must also be maintained in isolated operation or in operation that is not synchronised with the mains power supply, or these measures must be replaced by equivalent measures in the installation.
Technical data Fan motor 80 W Hob lighting 3 x 3 W Total connected load 89 W Voltage AC 230 V Fuse rating 5 A Mains connection cable length 1.5 m Weight DA 4228 W 27 kg WiFi module Frequency band 2.400–2.4835 GHz Maximum transmission power < 100 mW...