Advertisement
Quick Links
1. Disassembly Procedures:
S1
Open the carton with a proper tool.
Take out all accessories including QSG, Delta-e
paper, user's manual, DP cable, USB cable, power
S2
cable and other packing materials from the
carton.(Note: It depends on whether users returning
the accessories)
Take out the base, Paper-Top and stand from the
S3
carton, then take out the monitor from the pizza
carton.
stand
Take out the monitor from EPE-bag and put the LCD
S4
monitor on a protective cushion.
Delta_E paper
QSG
User's manual
DP cable
power cable
USB cable
base
Use a Philips-head screwdriver to remove four
S5
screws for unlocking mechanisms.
(No.1~4 screw size=M4x8; Torque=10~11kgfxcm)
2
4
Wedge your fingers between the rear cover and the
middle bezel on the corner of the top side of the
monitor to release the rear cover, then use one hand
S6
to press the middle bezel, the other hand to pull up
carefully the rear cover in order of arrow preference
for unlocking mechanisms of rear cover.
1
2
4
Lift the rear cover up carefully. Disconnect the USB
S7
FFC cable from the connector of the interface board,
and then remove the rear cover.
DELL U2419H
Go to contents page
3
1
2
3
1
Advertisement
Related Manuals for Dell Ultrasharp U2419H
Summary of Contents for Dell Ultrasharp U2419H
- Page 1 DELL U2419H Go to contents page 1. Disassembly Procedures: Use a Philips-head screwdriver to remove four screws for unlocking mechanisms. Open the carton with a proper tool. (No.1~4 screw size=M4x8; Torque=10~11kgfxcm) Take out all accessories including QSG, Delta-e Wedge your fingers between the rear cover and the paper, user’s manual, DP cable, USB cable, power...
- Page 2 DELL U2419H Go to contents page Use a Philips-head screwdriver to remove one screw se a Philips-head screwdriver to remove 2pcs for unlocking the USB board unit, then release the screws(left and right) for unlocking the front bezel USB board unit and put it aside.
- Page 3 DELL U2419H Go to contents page Turn over the bracket chassis module. Remove the Mylar from the hooks of the bracket, and then use a Philips-head screwdriver to remove screws for unlocking AC power outlet. (No.1~2 screw size=M3x10, Torque=6 kgfxcm) ±0.5...
- Page 4 DELL U2419HC DELL U2419H Go to contents page Remove electrolyte capacitors (red mark) from printed circuit boards S1 -1 Cut the glue between bulk cap. and PCB with a knife S1 -2 Ensure cutting path within the glue, don’t touch bulk cap. or PCB...
- Page 5 DELL U2419H Go to contents page S1 -4 Take out bulk cap. pin solder with soldering iron and absorber S1 -5 Lift the bulk cap. up and away from the PCB...
- Page 6 DELL U2419HC DELL U2419H Go to contents page . Product material information The following substances, preparations, or components should be disposed of or recovered separately from other WEEE in compliance with Article 4 of EU Council Directive 75/442/EEC. Capacitors / condensers (containing...