Audio - Bosch MIC IP ultra 7100i User Manual
Hide thumbs
Also See for MIC IP ultra 7100i:
- User manual (96 pages) ,
- Installation manual (72 pages) ,
- Instruction manual (72 pages)
Table of Contents
Advertisement
MIC IP ultra 7100i │ MIC IP starlight 7100i
–
Maximum IR intensity
Select the percentage of maximum intensity of the infrared (IR) light, from 0 to 100.
No white light
Select On to disable the field White light illuminators. The options in the field White light
illuminators are disabled.
Select Off to enable field White light illuminators.
White light illuminators
Select On to turn on the White light illuminators.
Select Off to turn off the White light illuminators.
White light intensity
Select the degree of intensity of the White light.
Note: This field is active only if the White light illuminator is On.
White light timeout
Select On to enable a timeout for the White light feature.
Select Off to disable the timeout.
The timeout turns OFF the White light, after the light has been ON but idle for some time, to
help to retain the life of the LEDs.
White light timeout [min]
Select the number of minutes (from 1 to 30) after which the White light will turn off after
activation.
Wiper
Controls the wiper of the MIC cameras. Options are:
–
–
–
–
Wiper/washer
Click Start to start the wiper/washer. Click Stop to stop the wiper/washer.
5.13
Audio
Audio
You can set the gain of the audio signals to suit your specific requirements. The live video
image is shown in the window to help you check the audio source. Your changes are effective
immediately.
If you connect via Web browser, you must activate the audio transmission on the 'Live'
functions page. For other connections, the transmission depends on the audio settings of the
respective system.
The audio signals are sent in a separate data stream parallel to the video data, and so increase
the network load. The audio data is encoded according to the selected format and requires
additional bandwidth. If you do not want any audio data to be transmitted, select Off.
Input volume
Set the input volume using the slide. Values range from 0 to 119.
Line Out
Set the line output gain using the slider. Values range from 0 to 115.
Bosch Security Systems
20x to 30x
Off: Turns off the wiper.
On: Wiper wipes continuously until deactivated manually, or until it has been on for five
minutes (after which the camera will stop the wiper automatically).
Intermittent: Wipes twice, then stops. Every 15 seconds, this cycle repeats until users
select another option in this field.
One shot: Wipes five times, then turns off.
User Manual
Camera | en
39
2020-11 | 1.4 |
- Quick Links:
- Configuration
Hide quick links:
Advertisement
Table of Contents
