hit counter script
Bosch MIC IP ultra 7100i User Manual
  1. Manuals
  2. Brands
  3. Bosch Manuals
  4. Security Camera
  5. MIC IP ultra 7100i
  6. User manual

Bosch MIC IP ultra 7100i User Manual

Hide thumbs Also See for MIC IP ultra 7100i:
Table of Contents

Advertisement

Quick Links

MIC IP ultra 7100i │ MIC IP starlight 7100i
en
User Manual

Advertisement

Table of Contents
loading

Related Manuals for Bosch MIC IP ultra 7100i

Summary of Contents for Bosch MIC IP ultra 7100i

  • Page 1 MIC IP ultra 7100i │ MIC IP starlight 7100i User Manual...

  • Page 3: Table Of Contents

    MIC IP ultra 7100i │ MIC IP starlight 7100i Table of contents | en Table of contents Introduction Systems requirements Establishing the connection Configuration with Project Assistant app Password protection in camera System overview Live page Playback Configuration Dashboard General...
  • Page 4 | Table of contents MIC IP ultra 7100i │ MIC IP starlight 7100i Maximum Retention Time Recording Scheduler Recording Status Recording Statistics Image Posting Alarm Alarm Connections Video Content Analysis (VCA) Audio Alarm Alarm E-Mail Alarm Task Editor Alarm Rules...

  • Page 5: Mic Ip Ultra 7100I │ Mic Ip Starlight 7100I Table Of Contents | En

    MIC IP ultra 7100i │ MIC IP starlight 7100i Table of contents | en 11.1 Recommended Use of Your MIC Camera 11.2 Using the Wiper/Washer (Bosch Protocol) 11.3 Using the Wiper/Washer (Pelco Protocol) 11.4 Uploading a User Logo 11.5 Two-line and Three-line Camera Titles 11.6...

  • Page 6: Introduction

    You can also use the Project Assistant app to complete the initial configuration of the camera. In order to use this device with the Project Assistant app by Bosch, you must download the app from the Bosch Download Store, from Google Play, or from the Apple Store.

  • Page 7: Password Protection In Camera

    MIC IP ultra 7100i │ MIC IP starlight 7100i Introduction | en Password protection in camera The device is password-protected. The first time that any user accesses the device, the device will prompt the user to set a password at the service level.

  • Page 8: System Overview

    | System overview MIC IP ultra 7100i │ MIC IP starlight 7100i System overview When a connection is established, the Live page shows. The page shows the live video from the camera. The application bar near the top of the page, below the name of the product or of the product...

  • Page 9: Playback

    MIC IP ultra 7100i │ MIC IP starlight 7100i System overview | en Icon Description Function Start Video Security App Start the app and use It to view live images, to configure and to operate the device from any location.

  • Page 10: General

    A check mark in this check box indicates that at least one certificate is loaded onto the camera. If no certificates are loaded, then “No certificate installed” appears to the right of the text. The Escrypt certificate is a root certificate for Bosch Security Systems that proves that the device meets the following criteria: –...

  • Page 11: Date/Time

    MIC IP ultra 7100i │ MIC IP starlight 7100i General | en The device has three authorization levels: service, user, and live. – service is the highest authorization level. Entering the correct password gives access to all the functions and allows all configuration settings to be changed.

  • Page 12: Display Stamping

    | General MIC IP ultra 7100i │ MIC IP starlight 7100i Daylight saving time The internal clock can switch automatically between normal and daylight saving time (DST). The unit already contains the data for DST switch-overs for many years in advance. If the date, time and zone have been set up correctly, a DST table is automatically created.
  • Page 13 MIC IP ultra 7100i │ MIC IP starlight 7100i General | en Logo To place a logo on the image, select and upload an uncompressed .bmp file with a maximum size of 128x128 pixels and 256 colors to the camera. Its position on the image can then be selected.
  • Page 14 | General MIC IP ultra 7100i │ MIC IP starlight 7100i Specify the exact position (Position (XY)). In the Position (XY) fields, enter the values for the desired position. Title region Select On to set or to edit the position of the title region on the OSD.

  • Page 15: T 28181

    MIC IP ultra 7100i │ MIC IP starlight 7100i General | en GB/T 28181 This page allows you to set the parameters for conformance to the GB/T 28181 national standard “Security and protection video monitoring network system for information transport, switch and control”. This standard is specifically for China.

  • Page 16: Web Interface

    | Web Interface MIC IP ultra 7100i │ MIC IP starlight 7100i Web Interface Appearance You can adapt the appearance of the web interface and change the website language to meet your requirements. You can use GIF or JPEG images to replace the company and device logos. The image can be stored on a web server.

  • Page 17: Live' Functions

    MIC IP ultra 7100i │ MIC IP starlight 7100i Web Interface | en – Green: Fields, lines and routes used in a task are displayed in green. They can be edited but not deleted. – Red: Fields, lines and routes currently in alarm mode are displayed in red.
  • Page 18 | Web Interface MIC IP ultra 7100i │ MIC IP starlight 7100i Show alarm inputs Select this checkbox if you want the alarm inputs to appear in the Digital I/O section of the Live page. Show alarm outputs Select this checkbox if you want the alarm outputs to appear in the Digital I/O section of the Live page.

  • Page 19: Camera

    MIC IP ultra 7100i │ MIC IP starlight 7100i Camera | en Camera Installer Menu Application variant – If you are connecting to MIC-ALM-WAS-24, select “[camera name] - IO“ to allow the camera to recognize additional inputs and outputs from this device and to allow control of an external washer unit.

  • Page 20: Positioning

    | Camera MIC IP ultra 7100i │ MIC IP starlight 7100i 5.1.1 Positioning The Positioning feature describes the location of the camera and the perspective in the camera’s field of view. Perspective information is essential to Video Analytics, as it enables the system to compensate for the illusory smallness of distant objects.
  • Page 21 MIC IP ultra 7100i │ MIC IP starlight 7100i Camera | en Notice! The Sketch functionality is only available for configured and assigned pre-positions. For AUTODOME and MIC cameras, configure the pre-positions of the camera and assign the pre-positions to one of the available 16 VCA profiles before calibration with Sketch.
  • Page 22 | Camera MIC IP ultra 7100i │ MIC IP starlight 7100i – Enter the real size of a line or angle. To do this, select the line or angle, then enter the size in the corresponding box. Example: You have placed a line on ground across the lower side of an automobile.

  • Page 23: Scene Mode

    MIC IP ultra 7100i │ MIC IP starlight 7100i Camera | en WGS 84 The WGS 84 coordinate system is a spherical coordinate system description of the world and used in many standards including GPS. Latitude Latitude is the north-south position of the camera in the spherical coordinate system WGS 84.

  • Page 24: Color

    | Camera MIC IP ultra 7100i │ MIC IP starlight 7100i Copy mode to Select the mode from the drop-down menu to which you wish to copy the active mode. Note: To restore the default setting of all scene modes, you must click the SC setting.

  • Page 25: Picture Settings

    MIC IP ultra 7100i │ MIC IP starlight 7100i Camera | en Option in field “White Additional Additional fields for NOTES balance” Input field configuration Manual R-gain G-gain B-gain RGB-weighted white balance In an auto mode, RGB-weighted white balance can be switched On or Off. When On, additional fine tuning of the automatic color reproduction can be made with the R, G and B weight sliders.
  • Page 26 | Camera MIC IP ultra 7100i │ MIC IP starlight 7100i Blue Gain The blue gain adjustment offsets the factory white point alignment (reducing blue introduces more yellow). It is only necessary to change the white point offset for special scene conditions.

  • Page 27: Enhance

    MIC IP ultra 7100i │ MIC IP starlight 7100i Camera | en The range of options is from 1/60 to 1/10000. The default value is 1/120 for all modes except Motion (default 1/500). Backlight compensation The function will ignore small areas of high illumination directly into the camera. The function increases the brightness of the overall screen to make sure that subjects and the larger portion of the scene remain bright.
  • Page 28 | Camera MIC IP ultra 7100i │ MIC IP starlight 7100i Backlight compensation – Select Off to switch off backlight compensation. – Select On to capture details in high-contrast and extremely bright-dark conditions. – Select Intelligent Auto Exposure to capture object detail in scenes with people moving in front of a bright background.

  • Page 29: Scene Mode Scheduler

    MIC IP ultra 7100i │ MIC IP starlight 7100i Camera | en 5.2.4 Scene Mode Scheduler The scene mode scheduler is used to determine which scene mode should be used during the day and which scene mode should be used during the night.
  • Page 30 | Camera MIC IP ultra 7100i │ MIC IP starlight 7100i Profile number Default Profile name Description Profile 6 SD Bit Rate For an SD image, the video bit rate and frame Optimized quality are adjusted to ensure that the bit rate is the priority.
  • Page 31 MIC IP ultra 7100i │ MIC IP starlight 7100i Camera | en Note: The value in this field adjusts the resolution for SD streams only. Expert settings If necessary, use the expert settings to adapt the I-frame quality and the P-frame quality to specific requirements.

  • Page 32: Encoder Streams

    | Camera MIC IP ultra 7100i │ MIC IP starlight 7100i Default Click Default to return the profile to the factory default values. Encoder Streams Note: If you access this menu while the camera is recording, the following message appears at the top of the page: Recording is currently active.

  • Page 33: Encoder Statistics

    MIC IP ultra 7100i │ MIC IP starlight 7100i Camera | en Each stream shows its active profile. When you click the name, the Encoder Profile (stream (number), profile (number)) window appears. Refer to the chapter Encoder Profile, page 29 for details.

  • Page 34: Ptz Settings

    | Camera MIC IP ultra 7100i │ MIC IP starlight 7100i – Shutter Speed: switches to default. – Manual: camera must be manually adjusted to compensate for varying light conditions. Auto iris level Increases or decreases brightness according to the amount of light. Type a value between 1 and 15.
  • Page 35 MIC IP ultra 7100i │ MIC IP starlight 7100i Camera | en Maximum pan speed [%] Select the maximum pan speed (in percent). Settings range from 1 to 100. The default is 100. Note: If you would like to pan/tilt manually, or to use recording Tour A / Tour B, while using the “IVA while moving”...

  • Page 36: Pre-Positions And Tours

    | Camera MIC IP ultra 7100i │ MIC IP starlight 7100i Click the View Control link, under the image cameo, to access the directional and zoom controls. Use the View Control dialog box to make the necessary camera movements.

  • Page 37: Pre-Position Settings

    MIC IP ultra 7100i │ MIC IP starlight 7100i Camera | en To add a pre-position into the custom tour, select the pre-position from the general list and click the triangle button to copy it to the custom tour list.

  • Page 38: Sectors

    | Camera MIC IP ultra 7100i │ MIC IP starlight 7100i Night near limit [m] Select the distance (in meters), from 0.1 to 20 m, for the minimum distance of the zoom focus during the night. White light illuminators Select On to turn on the White light illuminators.

  • Page 39: Audio

    MIC IP ultra 7100i │ MIC IP starlight 7100i Camera | en – 20x to 30x Maximum IR intensity Select the percentage of maximum intensity of the infrared (IR) light, from 0 to 100. No white light Select On to disable the field White light illuminators. The options in the field White light illuminators are disabled.

  • Page 40: Pixel Counter

    | Camera MIC IP ultra 7100i │ MIC IP starlight 7100i Recording format Select a format for audio recording. The default value is AAC 48 kbps. You can select AAC 80 kbps, G.711 or L16 depending on the required audio quality or sampling rate.

  • Page 41: Recording

    MIC IP ultra 7100i │ MIC IP starlight 7100i Recording | en Recording Introduction to recording Images can be recorded to an appropriately configured iSCSI system or, for devices with an SD slot, locally to an SD card. SD cards are the ideal solution for shorter storage times and temporary recordings. They can be used for local alarm recording or to improve the overall reliability of video recording.

  • Page 42: Formatting Storage Media

    | Recording MIC IP ultra 7100i │ MIC IP starlight 7100i In the Storage overview section, double-click a storage medium, an iSCSI LUN or one of the other available drives. – The medium is added as a target in the Managed storage media list.

  • Page 43: Maximum Retention Time

    MIC IP ultra 7100i │ MIC IP starlight 7100i Recording | en Caution! Without metadata, it is not possible to include video content analysis in recordings. Select what is to be included in the recordings: – Audio: If audio is not enabled, Off is shown. Click on Off and the page is redirected to the Audio section.

  • Page 44: Recording Scheduler

    | Recording MIC IP ultra 7100i │ MIC IP starlight 7100i Make sure that the retention time does not exceed the available recording capacity. Recording Scheduler The recording scheduler allows you to link the created recording profiles with the days and times at which the camera's images are to be recorded in the event of an alarm.

  • Page 45: Recording Status

    MIC IP ultra 7100i │ MIC IP starlight 7100i Recording | en Click the Stop button to deactivate the recording scheduler. Running recordings are interrupted and the configuration can be changed. Recording status The graphic indicates the recording activity of the camera. You will see an animated graphic while recording is taking place.
  • Page 46 | Recording MIC IP ultra 7100i │ MIC IP starlight 7100i The following field may or may not appear, depending on your camera: Target Select the target account for JPEG posting. Notice! You must configure an account in order to have functionality for Image Posting. Click on Configure accounts to do so.

  • Page 47: Alarm

    MIC IP ultra 7100i │ MIC IP starlight 7100i Alarm | en Alarm Alarm Connections You can select how the camera responds to an alarm. In the event of an alarm, the unit can automatically connect to a pre-defined IP address. You can enter up to ten IP addresses to which the camera will connect in sequence in the event of an alarm, until a connection is made.
  • Page 48 | Alarm MIC IP ultra 7100i │ MIC IP starlight 7100i Remote port Depending on the network configuration, select a browser port here. The ports for HTTPS connections will be available only if the On option is selected in the SSL encryption parameter.

  • Page 49: Video Content Analysis (Vca)

    MIC IP ultra 7100i │ MIC IP starlight 7100i Alarm | en Video Content Analysis (VCA) Note: This section of the manual provides an overview of the fields and the options for each field on the page VCA. This section is not a complete tutorial of setting up VCA. For more information, refer to the separate manual Video Content Analysis (VCA), available on the product page for Intelligent Video Analytics.

  • Page 50: Audio Alarm

    | Alarm MIC IP ultra 7100i │ MIC IP starlight 7100i Tamper detection Detect tampering of cameras and video cables by means of various options. Run a series of tests at different times of the day and night to ensure that the video sensor is operating as intended.

  • Page 51: Alarm E-Mail

    MIC IP ultra 7100i │ MIC IP starlight 7100i Alarm | en Do not use any special characters, for example &, in the name. Special characters are not supported by the system's internal management. Signal Ranges You can exclude particular signal ranges in order to avoid false alarms. For this reason the total signal is divided into 13 tonal ranges (mel scale).

  • Page 52: Alarm Task Editor

    | Alarm MIC IP ultra 7100i │ MIC IP starlight 7100i VCA overlays Select the VCA overlays check box, to place the outline of the object that triggered an alarm into the camera image sent as snapshot via e-mail.
  • Page 53 MIC IP ultra 7100i │ MIC IP starlight 7100i Alarm | en – Time range: If you select this option, then two input fields appear to the right. In these fields, enter the time range for the activation of the alarm in hours and minutes. (The default values are 00:00 and 00:00.)

  • Page 54: Network

    | Network MIC IP ultra 7100i │ MIC IP starlight 7100i Network Network Services This page shows an overview of all available network services. Use the checkbox to activate or deactivate a network service. Click on the settings symbol next to the network service to go to the settings page for this network service.
  • Page 55 MIC IP ultra 7100i │ MIC IP starlight 7100i Network | en Notice! Multicast operation is only possible with the UDP protocol. The TCP protocol does not support multicast connections. The MTU value in UDP mode is 1,514 bytes. UDP encryption Enable this option to encrypt the User Datagram Protocol (UDP) connection.

  • Page 56: Advanced

    | Network MIC IP ultra 7100i │ MIC IP starlight 7100i – 10 Mbps HD (half duplex) – 10 Mbps FD (full duplex) – 100 Mbps HD (half duplex) – 100 Mbps FD (full duplex) Network MSS (Byte) You can set the maximum segment size for the IP packet's user data. This gives you the option to adjust the size of the data packets to the network environment and to optimize data transmission.

  • Page 57: Network Management

    MIC IP ultra 7100i │ MIC IP starlight 7100i Network | en Click Configure. TCP metadata input TCP port The device can receive data from an external TCP sender, for example an ATM or POS device, and store it as metadata. Select the port for TCP communication. Select Off to deactivate the TCP metadata function.

  • Page 58: Network Management

    | Network MIC IP ultra 7100i │ MIC IP starlight 7100i Network Management SNMP The camera supports two versions of Simple Network Management Protocol (SNMP) for managing and monitoring network components, and can send SNMP messages (traps) to IP addresses.

  • Page 59: Ipv4 Filter

    MIC IP ultra 7100i │ MIC IP starlight 7100i Network | en Port Enter the port address for the stream here. Streaming Click the checkbox to activate multicast streaming mode. An activated stream is marked with a check. (Streaming is typically not required for standard multicast operation.)

  • Page 60: Service

    Notice! Potential loss of data Bosch recommends that you save all device configurations, including IVA and calibration, on your network before starting a firmware update. Notice! Before starting a firmware update, make sure to select the correct upload file.

  • Page 61: Licenses

    MIC IP ultra 7100i │ MIC IP starlight 7100i Service | en Licenses This window is for the activation of additional functions by entering activation codes. An overview of installed licenses is shown. The installation code of the unit is also displayed here.

  • Page 62: Operation Via The Browser

    | Operation via the browser MIC IP ultra 7100i │ MIC IP starlight 7100i Operation via the browser 10.1 Live page 10.1.1 Connection Stream 1 Select this option to display stream 1 of the camera. Stream 2 Select this option to display stream 2 of the camera.

  • Page 63: Aux Control

    MIC IP ultra 7100i │ MIC IP starlight 7100i Operation via the browser | en Select the appropriate pre-position (1 through 6). Click to store the pre-position. Note: If the pre-position is already stored, a dialog box displays the message, “Overwrite current pre-position?”...

  • Page 64: Recording Status

    | Operation via the browser MIC IP ultra 7100i │ MIC IP starlight 7100i 10.1.6 Recording status The hard drive icon below the live camera image changes during an automatic recording. The icon lights up and displays a moving graphic to indicate a running recording. If no recording is taking place, a static icon is displayed.

  • Page 65: Status Icons

    MIC IP ultra 7100i │ MIC IP starlight 7100i Operation via the browser | en 10.1.10 Status icons Various overlays in the video image provide important status information. The overlays provide the following information: Decoding error The frame might show artifacts due to decoding errors.

  • Page 66: Playback

    | Operation via the browser MIC IP ultra 7100i │ MIC IP starlight 7100i 10.2 Playback Click Playback in the application bar to view, search or export recordings. This link is only visible when a direct iSCSI or memory card is configured for recording (with Video Recording Manager (VRM) recording this option is not active).

  • Page 67: Dashboard

    MIC IP ultra 7100i │ MIC IP starlight 7100i Operation via the browser | en – Click the alarm jump buttons to go from one alarm event to the next or to the previous one. Red bars indicate the points in time where alarms were triggered.

  • Page 68: Using Your Mic Camera

    Note: Tour B is now intended for use with the 'IVA while moving' functions. Preset Tours For scenarios that require the camera to be in continuous motion for most of the day, Bosch recommends that you set the camera in Preset Tour mode, moving between a desired set of presets.

  • Page 69: Using The Wiper/Washer (Bosch Protocol)

    MIC IP ultra 7100i │ MIC IP starlight 7100i Using your MIC Camera | en 11.2 Using the Wiper/Washer (Bosch Protocol) The "predefined position" for the wash/wipe function is preset 62. The installer must define preset 62 (preferably where the washer nozzle is located and can direct washer fluid towards the camera window) before using the wiper/washer function.

  • Page 70: Using The Wiper/Washer (Pelco Protocol)

    | Using your MIC Camera MIC IP ultra 7100i │ MIC IP starlight 7100i 11.3 Using the Wiper/Washer (Pelco Protocol) To activate the washer/wiper in Pelco protocol, follow these steps: 1. From the Configuration page > Illumination/Wiper > Wiper/washer, click Start, and then exit the menu.

  • Page 71: Uploading A User Logo

    MIC IP ultra 7100i │ MIC IP starlight 7100i Using your MIC Camera | en 11.4 Uploading a User Logo Customers have the option to upload custom logos that display on the web browser of the device. All user logo images must comply with the following requirements: –...
  • Page 72 | Using your MIC Camera MIC IP ultra 7100i │ MIC IP starlight 7100i – Display three (3) lines of text at the top of the video. Use the command AUX ON-76- ENTER. About Fonts for Camera Titles –...

  • Page 73: Azimuth, Elevation, And Compass Directions

    Azimuth Zero point. Notice! Bosch recommends that only the installer calibrate the Azimuth Zero point. A recalibration to the Azimuth Zero point may cause inaccurate compass headings. Set the Azimuth Zero point: Determine the North compass heading, then move the camera to that position.

  • Page 74: Troubleshooting

    | Troubleshooting MIC IP ultra 7100i │ MIC IP starlight 7100i Troubleshooting Table of Troubleshooting Issues The table below identifies issues that could occur with the camera, and how to resolve them. Problem Questions to Ask/Actions to Resolve the Problem No camera control.
  • Page 75 MIC IP ultra 7100i │ MIC IP starlight 7100i Troubleshooting | en The image on the screen is distorted. Is the power frequency set properly in sync? If the power frequency is not set correctly, the line lock synchronization mode cannot be used. Set the synchronization mode to INT.
  • Page 76 – Troubleshooting – Repair & Exchange – Product Security Bosch Building Technologies Academy Visit the Bosch Building Technologies Academy website and have access to training courses, video tutorials and documents: www.boschsecurity.com/xc/en/support/training/ 2020-11 | 1.4 | Bosch Security Systems User Manual...

  • Page 77: Status Codes

    MIC IP ultra 7100i │ MIC IP starlight 7100i Status Codes | en Status Codes For certain conditions, MIC cameras will display status codes on the video image. The table below identifies the status codes, their descriptions, and the recommended action to resolve the condition.
  • Page 78 | Status Codes MIC IP ultra 7100i │ MIC IP starlight 7100i Status Description Recommended action Code (to be completed by a qualified Service Technician) 2. Review the diagnostic log of the camera (accessible from the Service menu) for errors related to the operation of the internal heaters.
  • Page 79 MIC IP ultra 7100i │ MIC IP starlight 7100i Status Codes | en Status Description Recommended action Code (to be completed by a qualified Service Technician) Wiper operation has been halted 1. Remove any obvious materials that are because of an obstruction.
  • Page 80 | Status Codes MIC IP ultra 7100i │ MIC IP starlight 7100i Status Description Recommended action Code (to be completed by a qualified Service Technician) Motor operation has been halted 1. Remove any obvious materials that are due to an obstruction.
  • Page 81 MIC IP ultra 7100i │ MIC IP starlight 7100i Status Codes | en Illuminator error: IR Reboot the camera by powering the camera off and then on, or by clicking the button Reboot in the camera’s web browser (Configuration > Camera > Installer Menu >Reboot device).

  • Page 82: Aux Commands

    | AUX Commands MIC IP ultra 7100i │ MIC IP starlight 7100i AUX Commands Function Command Description On/Off Auto Pan without limits (Continuous) On/Off Auto Pan between limits On/Off Run Custom Pre-Position Tour On/Off Run Pre-Position Tour On/Off AutoPivot Enable...
  • Page 83 MIC IP ultra 7100i │ MIC IP starlight 7100i AUX Commands | en Function Command Description On/Off Wiper On/Off (Intermittent) On/Off Wiper On/Off (One shot) On/Off Wash/Wipe On/Off On/Off Left Hard Pan Limit On/Off Right Hard Pan Limit On/Off Clear Hard Pan Limits...
  • Page 84 | AUX Commands MIC IP ultra 7100i │ MIC IP starlight 7100i 2020-11 | 1.4 | Bosch Security Systems User Manual...
  • Page 86 Bosch Security Systems B.V. Torenallee 49 5617 BA Eindhoven Netherlands www.boschsecurity.com © Bosch Security Systems B.V., 2020 202011032346...

This manual is also suitable for:

Mic ip starlight 7100iMic inteox 7100iMic ip fusion 9000i

Table of Contents