Introduction; General Guidelines - GE LOGIQ 7 Basic User Manual

Hide thumbs Also See for LOGIQ 7:

Table of Contents

Introduction

Urology Exam Preparation

Measurements and calculations derived from ultrasound images

are intended to supplement other clinical procedures available

to the attending physician. The accuracy of measurements is not

only determined by the system accuracy, but also by use of

proper medical protocols by the user. When appropriate, be sure

to note any protocols associated with a particular measurement

or calculation. Formulas and databases used within the system

software that are associated with specific investigators are so

noted. Be sure to refer to the original article describing the

investigator's recommended clinical procedures.

New Patient information must be entered before beginning an

exam. See 'Beginning an Exam' for more information.

Any measurement can be repeated by selecting that

measurement again from the Touch Panel Menu.

The system retains as many as eight measurements, but the

worksheet retains only the last six measurements of each type.

The three report page measurements can be averaged and the

average used in other calculations.

LOGIQ 7 Basic User Manual

Direction 2392206-100 Rev. 1