Table of Contents
Advertisement
36
en | Installing a Recessed Mount
4.
5.
6.
F.01U.172.910 | 4.0 | 2011.09
Align holes of mounting plate (supplied with dome) with
mounting bracket and attach with screws. Ensure that
both the crescent shape of the mounting plate and the
crescent shape of the mounting bracket are aligned.
Figure 6.2 Attach Mounting Plate to Mounting Bracket
1
Mounting Bracket
2
Mounting Plate
3
Clamping Plate
4
Crescent Shape
5
Clamp Drive Screw
Loosen the two clamp drive screws (item 5, above) so that
the clamping plates move freely.
Insert mount through the hole in the ceiling. Slide clamps
out and down so that the ceiling/drywall is captured in
between the clamps and the bracket flange. The ceiling/
drywall must have a maximum thickness of 41.7 mm
(1.64 in.) and an minimum thickness of 12.7 mm (0.50 in.).
Installation Manual
AutoDome Junior HD
Bosch Security Systems, Inc.
Advertisement
Table of Contents
