6.
Remove the screws that secure the hard drive bracket.
7.
Remove the hard drive bracket from the hard drive.
Installing the Hard Drive
1.
Engage the hard drive bracket to the hard drive.
2.
Install the screws that secure the hard drive bracket.
3.
Install the hard drive into the computer.
4.
Install the screw that secures the hard drive bracket in place.
5.
Install:
a) base panel
b) battery
6.
Follow the procedures in After Working Inside Your Computer.
Removing the WLAN Card
1.
Follow the procedures in Before Working Inside Your Computer.
2.
Remove:
a) battery
b) base cover
3.
Perform the following steps:
a) Disconnect the antennae cables from the WLAN card.
b) Remove the screw that secures the WLAN card to the computer.
c) Remove the WLAN card from its slot on the system board.
28