Installing the WLAN Card
1.
Insert the WLAN card into its connector on the system board.
2.
Connect the antenna cables to the respective connectors marked on the WLAN card.
3.
Tighten the screw to secure the WLAN card to the computer.
4.
Install:
a) base cover
b) battery
5.
Follow the procedures in After Working Inside Your Computer.
Removing the Memory Module
1.
Follow the procedures in Before Working Inside Your Computer.
2.
Remove:
a) battery
b) base cover
3.
Pry the retention clips away from the memory module until it pops up.
4.
Lift up the memory module and remove it from the computer.
Installing the Memory Module
1.
Insert the memory into the memory socket.
2.
Press the clips to secure the memory module to the system board.
3.
Install:
a) base cover
b) battery
4.
Follow the procedures in After Working Inside Your Computer.
Removing the Right Base Panel
1.
Follow the procedures in Before Working Inside Your Computer.
2.
Remove:
a) battery
b) access panel
29