Table of Contents
Advertisement
4.3 Drainage connection
Connect your appliance to drainage
connection so dirty water is dis-
charged via the wash cycle.
Installing the drainage connection
Consult the installation instructions
1.
supplied for the steps required
here.
Connect the wastewater hose to
2.
the outlet connection of the siphon
using the enclosed parts.
When doing so, check that the
3.
wastewater hose is not kinked,
crushed or twisted.
Also check that there is no cover
4.
in the drainage system preventing
the wastewater from being dis-
charged.
4.4 Drinking water connec-
tion
Connect your appliance to a drinking
water connection.
Installing the drinking water
connection
Note
¡ If you are replacing the appliance,
you must use a new water supply
hose.
Consult the installation instructions
1.
supplied for the steps required
here.
Connect the appliance to the drink-
2.
ing water connection using the en-
closed parts.
Observe the Technical data.
When doing so, check that the
3.
drinking water connection is not
kinked, crushed or twisted.
Installation and connection aus
4.5 Electrical connection
Connect your appliance to the power
supply.
Connecting the appliance to the
electricity supply
Notes
¡ Follow the Safety instructions
→ Page 4.
¡ Please note that the water safety
system is only functional if there is
a power supply.
Insert the non-heating appliance
1.
plug of the power cable into the
appliance.
Insert the mains plug of the appli-
2.
ance into a nearby socket.
The connection data for the appli-
ance can be found on the rating
plate.
Check that the mains plug is inser-
3.
ted properly.
13
Advertisement
Table of Contents
