ENUS_Dynamo_QSG_0_6_DRAFT.fm Page 1 Thursday, July 20, 2017 3:08 PM
Get Started
Nokia X
TA-1035/TA-
EN 1.0
1023
1. Insert the SIM and memory
card
1.With the phone facing down, put your fingernail in
the small recess located on the bottom edge.
2.Bend the cover open and remove it.
3.Slide the nano-SIM card into the SIM slot with the
metal contact area down until it locks into place. If
you have a dual-SIM phone, insert the second SIM
into the SIM2 slot until it locks into place.
4.If you have a microSD memory card, slide the card
into the memory card slot.
5.Press the top edge of the back cover against the
top edge of your phone, and then snap the cover
into place, locking all the hooks around the edges of
the cover.
Warning! Do not open the battery cover, it may
harm your device.
Use only original nano-SIM cards. Use of incompati-
ble SIM cards may damage the card or the device,
and may corrupt data stored on the card.
PartnumberX
Main camera
Microphone
Loudspeaker
Audio connector
Microphone
Charger connector
2. Charge the battery and switch
the phone on
Plug a compatible charger into a wall outlet, and
connect the cable to your phone. Your phone sup-
ports the USB micro-B cable. You can also charge
your phone from a computer with a USB cable, but
it may take a longer time.
If the battery is completely discharged, it may take
several minutes before the charging indicator is dis-
played.
To switch your phone on, press and hold the power
key until the phone vibrates. The phone guides you
through the setup.
Front camera
Proximity sensor
Earpiece
Volume keys
Power/Lock key
3. Learn more about your new
Nokia phone
For a printable user guide, online user guide, and
troubleshooting help, go to www.nokia.com/
phones.