Advertisement
Quick Links
Get Started
Nokia 2.1
TA-1084/TA-1093
1. Insert the SIM and memory
card
1. With the phone facing down, put your fingernail
in the USB connector, bend the back cover open,
and remove it.
2. Slide the SIM card holder to the left and open it
up. Put a nano-SIM card in the SIM slot with the
contact area face down. Close down the holder and
slide it to the right to lock it in place.
3. If you have a dual-SIM phone, slide the SIM card
holder of the SIM2 slot to the right and open it up.
Put your second nano-SIM card in the slot with the
contact area face down. Close down the holder and
slide it to the left to lock it in place.
4. If you have a microSD memory card, slide the
card in the memory card slot.
5. Press the top edge of the back cover against the
top edge of your phone, and then snap the cover
into place, locking all the hooks around the edges of
the cover.
Warning! Do not open the battery cover, it may
harm your device.
Note: Switch the device off and disconnect the
charger and any other device before removing any
covers. Avoid touching electronic components while
changing any covers. Always store and use the
device with any covers attached.
Use only original nano-SIM cards. Use of incompati-
ble SIM cards may damage the card or the device,
and may corrupt data stored on the card.
Use only compatible memory cards approved for
use with this device. Incompatible cards may dam-
age the card and the device and corrupt data stored
on the card.
Camera
Flash
USB connector
EN-US-CA
Important: Do not remove the memory card
when an app is using it. Doing so may damage the
memory card and the device and corrupt data
stored on the card.
Headset connector
Microphone
Power/Lock key
Loudspeaker
Both SIM cards are available at the same time when
the device is not being used, but while one SIM card
is active, for example, making a call, the other may
be unavailable.
2. Charge the battery and switch
the phone on
Plug a compatible charger into a wall outlet, and
connect the cable to your phone. Your phone
supports the USB micro-B cable. You can also
charge your phone from a computer with a USB
cable, but it may take a longer time.
If the battery is completely discharged, it may take
several minutes before the charging indicator is
displayed.
To switch your phone on, press and hold the power
key until the phone vibrates. The phone guides you
through the setup.
For an online user guide and troubleshooting help,
go to www.nokia.com/mobile-support.
Front camera
Proximity sensor
Earpiece/
Loudspeaker
Volume keys
Advertisement
Related Manuals for Nokia 2.1
Summary of Contents for Nokia 2.1
-
Page 1: Get Started
Headset connector Get Started Microphone Camera Front camera Nokia 2.1 Flash Proximity sensor Earpiece/ Loudspeaker Volume keys USB connector Power/Lock key Loudspeaker TA-1084/TA-1093 EN-US-CA 1. Insert the SIM and memory Important: Do not remove the memory card Both SIM cards are available at the same time when the device is not being used, but while one SIM card when an app is using it. -
Page 2: Product And Safety Info
© 2018 HMD Global. All rights reserved. HMD Global Oy is the reasonable protection against harmful interference in a residential exclusive licensee of the Nokia brand for phones & tablets. Nokia is a installation. This equipment generates, uses and can radiate radio registered trademark of Nokia Corporation. - Page 3 Qualcomm and Snapdragon are trademarks of Qualcomm Incorporated, registered in the United States and other countries. The Bluetooth word mark is owned by the Bluetooth SIG, Inc. and any use of such mark by HMD Global is under license.