Advertisement
Quick Links
Advertisement
Related Manuals for GE MS-PoE
Summary of Contents for GE MS-PoE
- Page 1 Security MS-PoE Injector User Manual P/N 1069179 • REV 1.0 • ISS 23FEB10 firealarmresources.com...
- Page 2 firealarmresources.com...
- Page 3 Any similarity to names and addresses of actual businesses or persons is entirely coincidental. Trademarks and GE and the GE monogram are trademarks of General Electric patents Company. Other trade names used in this document may be trademarks or registered trademarks of the manufacturers or vendors of the respective products.
- Page 4 Regulatory N4131 information Manufacturer GE Security, Inc. HQ and regulatory responsibility: GE Security, Inc., 8985 Town Center Parkway, Bradenton, FL 34202, USA EU authorized manufacturing representative: GE Security B.V., Kelvinstraat 7, 6003 DH Weert, The Netherlands European Union directives 2002/96/EC (WEEE directive):...
- Page 5 Content Chapter 1 Overview 1 Introduction 2 Chapter 2 Hardware Installation 7 MS-PoE Injector User Manual firealarmresources.com...
- Page 6 firealarmresources.com...
- Page 7 Chapter 1 Overview The GE Security MS-PoE is an IEEE 802.3af Power over Ethernet Injector that provides 48VDC power over Ethernet cables (PoE). Package Contents Your MS-PoE injector carton should contain the following items: • The Power over Ethernet Injector x 1 •...
- Page 8 Chapter 1: Overview Introduction The GE Security MS-PoE IEEE 802.3af Power over Ethernet Injector inserts DC Voltage into Cat.5 cable, allowing the cable between the Injector (MS-PoE) and Splitter (SP-PoE) to transfer data and power simultaneously. The maximum distance between the Injector (MS-PoE) and Splitter (SP-PoE) is 100 meters.
- Page 9 Chapter 1: Overview Product Overview Figure 1 shows the right and left side views of the MS-PoE injector. Figure 1: MS-PoE right and left side panels LED Indicators Color Function Power Yellow Lights to indicate that the MS-PoE has power.
- Page 10 1 x PoE ready / in-use Installation Standalone or wall mount Material Plastic Standard Conformance IEEE 802.3 Ethernet Standard Compliance IEEE 802.3u Fast Ethernet IEEE 802.3af Power over Ethernet Ethernet cable TIA/EIA-568, Category 5/5e cable MS-PoE Injector User Manual firealarmresources.com...
- Page 11 Electrical Specification Input Voltage: DC 48V, 0.38A NOTE: This product is intended to be supplied by a UL Listed Direct Plug-In Power Unit marked "Class 2" or "LPS" and output rated 48 VDC, 3 Amp minimum. MS-PoE Injector User Manual firealarmresources.com...
- Page 12 Chapter 1: Overview MS-PoE Injector User Manual firealarmresources.com...
- Page 13 Before your installation, it is recommended that you check your network environment. If there are any IEEE 802.3af devices that you need to power. The MS-PoE can provide you a way to supply power for this Ethernet device conveniently and easily. The MS-PoE works with an AC-DC adapter (not supplied) with DC 48V input and injects this DC power into the pin of the twisted pair cable (pair 4, 5 and pair 7, 8 for Fast Ethernet).
- Page 14 "Ethernet" port of MS-PoE. Connect the long cable that will be used to connect to the remote device to the port "Ethernet + DC". Connect an AC adapter to "DC 48V" of MS-PoE. The power LED will be steady on. NOTE: This product is intended to be supplied by a UL Listed Direct Plug-In Power Unit marked "Class 2"...
- Page 15 ON to show it is providing power. Note: If the connected device is not fully complying with IEEE 802.3af standard or in-line power device, the LED indicator of MS-PoE will not be steady on. Installing an MS-PoE and a SP-POE, Injector and Splitter Connect a standard network cable from "Ethernet+DC"...
- Page 16 Chapter 2: Hardware Installation Note: According to IEEE 802.3af standard, the MS-PoE will not inject power to the cable if not connecting to IEEE 802.3af devices. Please ensure the output voltage is correct before applying power to remote device. MS-PoE Injector User Manual...