New Events Screen - GE F650 User Manual
Grid solutions
digital bay controller
Hide thumbs
Also See for F650:
- Instruction manual (801 pages) ,
- User manual (323 pages) ,
- Instruction manual (534 pages)
Table of Contents
Advertisement
CHAPTER 3: INTERFACES, SETTINGS & ACTUAL VALUES
Intro: Meters.
To access the metering values in the moment of the event, the user must press the enter/shuttle key. A new metering
screen is displayed, containing the primary metering values in the snapshot event, such as:
Phasor Ia Primary
Phasor Ib Primary
Phasor Ic Primary
Line Frequency Primary
Phasor Ig Primary
Phasor Isg Primary
I0 Primary
I1 Primary
Once inside the Metering screen, a new legend is shown for each event (Intro or ESC: Prev. U-D (L-R: Scroll); press ESC
or the shuttle key to return to the Event Details screen, and press the up-down key or rotate the shuttle key to access
all the metering values contained in the metering screen of the selected event.
ESC: Prev.
If the user presses the ESC key from the event detail screen, the system returns to the all events screen.
: Scroll.
Pressing the up-down key or rotating the shuttle key left (L) or right (R) moves among all the events contained in the all
events screen, allowing a preview of the details for each of them.
<AT>
When this option is selected, the system marks the event where the cursor is located. A relative time stamp is
performed, in such a way that the selected event, marked with an asterisk (*) between the time and the event name is
set with a relative time of 00:00:00:000 on the top line of the event screen, together with its relative index, and the rest
of events in the screen shows a date/time that relates to the marked event. This operation mode allows a quick
inspection of the relative time passed between several events, which is very useful for analyzing events in the field.
The corresponding legend to this relative event-marking screen is as follows:
Esc: Out At.Enter: Tag event.
Esc: Out At.
The relative event marking is eliminated and the system returns to the general events screen.
Enter: Tag event.
If the user places the cursor on a different event by pressing the up-down key or rotating the shuttle key left or
right, pressing the enter/shuttle key changes the relative mark to that new event.
3.2.7.4 New events screen
This screen shows the new events that have been produced in the relay since the last time the New Events screen was
read. The top of the screen shows a "New Events" legend, and the relative and total number of events contained.
Navigation through the different menus in this New Events screen is similar to the one described in the previous section for
All Events. The main difference is that in the case of new events it is necessary to select the RELOAD submenu to update
the screen with new events that have been produced, while in the All Events screen, this refreshment is automatic.
After the new events have been read, if the user selects again the Reload menu, the system shows a <No new events
available.> message, indicating that there are no more new events available since the last reading.
GEK-113000-AF
I2 Primary
Vab Primary
Vbc Primary
Vca Primary
V1 Primary
V2 Primary
V0 Primary
3 Phase Power Factor
F650 DIGITAL BAY CONTROLLER
3.2 HUMAN-MACHINE INTERFACE (HMI)
3-61
- Quick Links:
- Mounting & Wiring
- Protection
Hide quick links:
Advertisement
Table of Contents
