Functional Description; Intended Use - Bosch PSR 960 Original Instructions Manual

Hide thumbs Also See for PSR 960:

page of 102

/ 102
Contents
Table of Contents
Bookmarks

Table of Contents

Available languages

14 | English

Switch off the power tool immediately when

the tool insert jams. Be prepared for high re-

action torque that can cause kickback. The

tool insert jams when:

— the power tool is subject to overload or

— it becomes wedged in the workpiece.

Hold power tool by the insulated gripping

surfaces, when performing an operation

where the cutting tool may run into hidden

wiring. Contact with a "live" wire will make

exposed metal parts of the tool "live" and

shock the operator.

Hold the machine with a firm grip. High reac-

tion torque can briefly occur while driving in

and loosening screws.

Secure the workpiece. A workpiece clamped

with clamping devices or in a vice is held more

secure than by hand.

Keep your workplace clean. Blends of mate-

rials are particularly dangerous. Dust from

light alloys can burn or explode.

Always wait until the machine has come to a

complete stop before placing it down. The

tool insert can jam and lead to loss of control

over the power tool.

Avoid unintentional switching on. Ensure the

On/Off switch is in the off position before in-

serting battery pack. Carrying the power tool

with your finger on the On/Off switch or in-

serting the battery pack into power tools that

have the switch on invites accidents.

Do not open the battery. Danger of short-

circuiting.

Protect the battery against heat, e. g.,

also against continuous sun irradiation

and fire. There is danger of explosion.

1 609 929 M91 | (5.3.08)