Related Manuals for Miele VENTILATION SYSTEM DA 230-3
Summary of Contents for Miele VENTILATION SYSTEM DA 230-3
- Page 1 Operating and installation instructions Ventilation System DA 230-3 To prevent accidents and machine damage, read these instructions installation or use. M.-Nr. 05 853 520...
- Page 2 Main power switch ..........10 Turning on the fan .
- Page 3 This appliance is intended for residential use only. Use the appliance only for its intended purpose. The manufacturer cannot be held responsible for damages caused by improper use of the hood. This appliance complies with current safety requirements. Improper use of the appliance can lead to personal injury and material damage.
- Page 4 However, under certain conditions it may be possible for an installation in these applications. Please contact the nearest Miele dealer or the Miele Tech- nical Service Department with specific requirements. Before servicing or cleaning the...
- Page 5 Never leave surface units unat- tended at high settings. Boilovers cause smoking and greasy spillovers may ignite. Heat oils slowly on low or medium settings. Always turn hood "ON" when cook- ing at high heat or when cooking flaming foods. Clean ventilating fans frequently.
- Page 6 When installing the hood, follow the recommended minimum safety distances between a Miele cooktop and the hood: – 22" (55 cm) above electric cooktops, – 26" (65 cm) above gas cooktops, – 26" (65 cm) above an open grill. If local building codes require a greater safety distance, follow their require- ment.
- Page 7 The ventilation hood works by air ex- traction. The air is drawn in and cleaned by the grease filters and di- rected outside. The hood comes equipped with a . This flap automatically closes when the hood is turned off so that no exchange of outside air and room air can occur.
- Page 9 This button turns the light on and off and also dims the light. The lighting can be used independently of the fan. Four fan speed selection. This button activates the Delayed Shut Down feature. The fan can be set to turn off automatically after either 5 or 15 minutes.
- Page 10 Press the main power switch to "I". The fan and the lighting can now be oper- ated. If the appliance is not going to be used for a long period of time (e.g. while va- cationing) turn the appliance off by pressing the main power switch to "0".
- Page 11 ^ Press the On/Off button to turn the fan off. The indicator goes out. The fan will turn off automatically 10 hours after the last button was acti- vated. The lighting however will remain ^ Press the On/Off button to turn the fan back on again.
- Page 12 A timer monitors the hours of fan opera- tion. The indicator for the grease filter will light after 30 hours of operation. The grease filters must then be cleaned. After the grease filters have been cleaned and put in place, the grease fil- ter timer must be reset.
- Page 13 The grease filter timer is preset to 30 hours. This time can be lengthened or shortened to 20, 30, 40 or 50 hours. – A time of 20 hours should be pro- grammed in kitchens with frequent pan or deep frying. –...
- Page 14 Before cleaning or servicing the hood, disconnect it from the power supply by either removing the fuse, unplugging it from the outlet or man- ually "tripping" the circuit breaker. Never use abrasive cleaners, scouring pads, steel wool or caustic (oven) cleaners on the hood. They will damage the surface.
- Page 15 The reusable metal grease filters re- move solid particles from the vented kitchen air (grease, dust, etc). The grease filters should be cleaned every 3-4 weeks or whenever the grease filter timer indicator lights. A dirty filter is a fire hazard. ^ To remove the grease filters press the locking clips in towards the middle of the filter.
- Page 16 Before changing the light bulbs, dis- connect the hood from the power supply by either removing the fuse, unplugging it, or manually "tripping" the circuit breaker. When in use halogen bulbs become extremely hot, and they can burn your hands. Do not attempt to change the bulbs until they have had sufficient time to cool down.
- Page 17 In the event of a fault which you cannot correct yourself please contact: – Your Miele Dealer – The Miele Technical Service Department 1-800-999-1360 techserv@mieleusa.com 1-800-565-6435 service@miele.ca When contacting the Technical Service Department, please quote the model and serial number of your appliance.
-
Page 19: Installation Instructions
Installation instructions... - Page 21 The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Please recycle. Ensure that any plastic wrappings, bags etc. are disposed of safely and kept out of the reach of children. Danger of suffocation! Old appliances may contain materials that can be recycled.
- Page 22 The ceiling mounting plate will sup- port the weight of the hood. This ceiling plate must be attached to rigid structural framing that is sup- ported in its entirety by the ceiling joists, or to the ceiling joists directly. Do not attach the plate directly to the ceiling by using anchors, mollies or toggle bolts.
- Page 23 If there is any question concerning the electrical connection of this appliance to your power supply, please consult a licensed electrician or call Miele’s Tech- nical Service Department. 1-800-999-1360 1-800-565-6435 The hood must be hard wired accord- ingly: Black/Red wire:.
- Page 24 a Mounting bolt holes b Cut out for power cord c Exhaust connection 6" (150 mm) diameter...
- Page 25 Do not install this exhaust hood over cooktops burning solid fuel. When installing the hood, make sure that the following ( ) between the top of a Miele cooking surface and the bottom of the hood is: - 22" (55 cm) above electric cooktops - 26"...
- Page 26 If 6" (150mm) diameter ducting is not possible then 5" (125 mm) ducting can be used in conjunction with a reducing collar available from the Miele Technical Service Department (see "Installation / "Air extraction"). ^ Drill four " (5 mm) holes in the ceil- ing.
- Page 27 ^ Secure the ducting to the mounting plate using a hose clip. ^ Insert the short edge of two spring clips into their slots from below and position so that the tab faces the cen- ter of the mounting plate. ^ Pull the power cord through the mounting plate.
- Page 28 ^ Secure the mounting plate to the ceil- ing using the 8 x 60 lag bolts. Once tight, make sure that the mounting plate can safely support the weight of the hood. ^ Pull the power cord through its cut out on the flange of the chimney.
- Page 29 ^ Bolt the flange firmly to the ceiling us- ing the four M6 nuts. ^ Shorten the power cord as much as possible and attach it to the terminal block inside the chimney (see "Elec- trical data"). Before connecting the appliance read the "Warning and Safety In- structions"...
- Page 30 – If the exhaust is ducted through an outside wall, a Miele Telescopic Wall Vent can be used. to reduce the – If the exhaust is ducted into an inac- tive flue, the air must be expelled parallel to the flow direction of the flue.
- Page 31 Never connect an exhaust hood to an active chimney, dryer vent, vent flue, or room venting ductwork. Seek professional advice before connect- ing an exhaust hood vent to an exist- ing, inactive chimney or vent flue. Ductwork with a diameter of less than 6"...
- Page 32 Alteration rights reserved / 5002 M.-Nr. 05 853 520 / V This paper consists of cellulose which has been bleached without the use of chlorine.