Table of Contents
Related Manuals for Miele DA3906
Summary of Contents for Miele DA3906
- Page 1 Operating and Installation Instructions Ventilation Hood To prevent accidents and damage to the appliance, you must read these instructions before installing the appliance and using it for the first time. en-US M.-Nr. 09 968 400...
-
Page 2: Table Of Contents
Contents IMPORTANT SAFETY INSTRUCTIONS..............3 Caring for the environment ................. 12 Description of functions ..................13 Guide to the appliance..................14 Operation ......................16 Turning on the fan ....................16 Selecting the power level..................16 Turning off the fan ....................17 Turning cooktop lighting On/Off................ -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS This appliance complies with current safety requirements. Improper use of the appliance can lead to personal injury and material damage. Read all instructions before installing or using the appliance for the first time. Only use the appliance for its intended purpose. Keep these operating instructions in a safe place and pass them on to any future user. -
Page 4: Technical Safety
Installation, repair and maintenance work should be performed by a Miele authorized service technician in accordance with national and local safety regulations and the provided installation instructions. Contact Miele’s Technical Service Department for examination, repair or adjustment. - Page 5 Tampering with electrical connections or components and mechanical parts is highly dangerous to the user and can cause operation faults. Defective components should be replaced by Miele original parts only. Only with these parts can the manufacturer guarantee the safety of the appliance. ...
-
Page 6: Proper Use
IMPORTANT SAFETY INSTRUCTIONS Proper use WARNING: TO REDUCE THE RISK OF A COOKTOP GREASE FIRE: – a) Never leave surface units unattended at high settings. Boilovers cause smoking and greasy spillovers may ignite. Heat oils slowly on low or medium settings. –... - Page 7 IMPORTANT SAFETY INSTRUCTIONS WARNING: TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT OF A COOKTOP GREASE FIRE, OBSERVE THE FOLLOWING*: – a) SMOTHER FLAMES with a close fitting lid, cookie sheet, or metal tray then turn off the burner. BE CAREFUL TO PREVENT BURNS.
- Page 8 IMPORTANT SAFETY INSTRUCTIONS Overheated oils and fats can ignite and set the ventilation hood on fire. When cooking with oils or fats, do not leave pots, pans or fryers unattended. Never leave an electric grill unattended when grilling. Fat and debris deposits impair the proper functioning of the ventilation hood.
- Page 9 IMPORTANT SAFETY INSTRUCTIONS Proper installation WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: – a) Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction.
- Page 10 Wear gloves to protect your hands from being cut. When installing the exhaust duct, only use pipes or tubes made of non-flammable material. These can be obtained from your Miele dealer or from Miele Technical Service. Exhaust air should not be vented into a chimney or vent flue which is otherwise in use and should not be channeled into ducting which ventilates rooms with fuel-burning installations.
- Page 11 Never use a steam cleaner to clean the ventilation hood. The steam can reach the electrical components and cause a short circuit. Accessories Use only genuine original Miele parts. If parts or accessories from other manufacturers are used, the warranty will become void.
-
Page 12: Caring For The Environment
Caring for the environment Disposal of the packing Disposal of your old appliance material Do not dispose of this appliance with your household waste. The cardboard box and packing materials protect the appliance during Old appliances may contain materials shipping. They have been designed to that can be recycled. -
Page 13: Description Of Functions
Description of functions The following functions are available on Recirculation mode your ventilation hood, depending on the The recirculation mode requires a model: recirculation kit and OdorFree Charcoal Filter (available as optional accessories, Vented mode see "Technical Data" for more information) The air is drawn in and cleaned by the grease filters and directed outside. -
Page 14: Guide To The Appliance
Guide to the appliance... - Page 15 Guide to the appliance a Telescopic chimney b Chimney c Canopy d Control panel e Grease filter f Spacer frame The spacer frame creates a shadow gap between the chimney and the ceiling. The ventilation hood can be installed with or without the spacer frame. g Recirculation vent (only for recirculation mode) h Cooktop lighting...
-
Page 16: Operation
Operation Turning on the fan Automatically switching back from the intensive level (IS) Press the On/Off button . The intensive level can be programmed The fan turns on at level 2. The to switch back to level 3 automatically symbol and 2 will light up in the fan after 10 minutes. -
Page 17: Turning Off The Fan
Operation Turning off the fan Press the On/Off button to turn the fan off. The symbol will go out. Turning cooktop lighting On/Off The cooktop lighting can be turned on and off separately from the fan. To do so, press the button. The ... -
Page 18: Cleaning And Care
Stainless steel surfaces can also be cleaned using a non-abrasive Before cleaning or servicing the stainless steel cleaner, available from hood, disconnect it from the power Miele. supply, see "IMPORTANT SAFETY INSTRUCTIONS". To prevent the surfaces from quickly becoming dirty again, we... -
Page 19: Grease Filters
Cleaning and care Special instructions for control Grease filters buttons The reusable metal grease filters in the appliance remove the solid particles Do not leave dirt and debris on the contained in kitchen vapors (fat, dust, buttons for any length of time. etc.), thereby preventing the ventilation Otherwise they may become hood from becoming dirty. - Page 20 Use a common household dishwasher detergent. Select a program with a wash temperature between 122°F (50°C) and 149°F (65°C). In a Miele dishwasher use the "Normal" program. Depending on the detergent used, cleaning the filters in a dishwasher may cause the inside filter surfaces to become discolored.
-
Page 21: Odorfree Charcoal Filter
6 months. canopy above the grease filters. OdorFree Charcoal Filters are available Disposing of the OdorFree Charcoal from your Miele dealer or from Miele. Filter See "Technical data" for the type and Used OdorFree Charcoal Filters can reference number. -
Page 22: Changing A Halogen Lamp
Cleaning and care Changing a halogen lamp The halogen lights become very hot during operation. They can cause burns even after being shut off for some time. Allow them to cool down for a few minutes before changing the halogen lamps. -
Page 23: Installation
Installation Before installation Before installing the appliance, read all of the information contained in this chapter and also in the 4 extension piece holders "IMPORTANT SAFETY for aligning and securing the telescopic INSTRUCTIONS" section. chimney Installation parts 4 screws M3/16" x 5/16" (M4 x 8.5 mm) for securing the extension piece holders. -
Page 24: Appliance Dimensions
Installation Appliance dimensions a Mounting area for the exhaust ducting and power cable. In recirculation mode, only the power cord is required. b Possible height range for appliance in vented mode c Possible height range for appliance in recirculation mode d Alternative installation with spacer frame e Air vent positioned at the top for recirculation... -
Page 25: Distance Between Cooktop And Ventilation Hood (S)
Please also observe the information contained in the "IMPORTANT SAFETY INSTRUCTIONS" section. Minimum distance S Cooking appliance Miele Non-Miele appliance appliance Electric/Induction cooktop 24" (610 mm) Electric grill, deep fat fryer (electric) 26"... -
Page 26: Installation Recommendations
Installation Installation recommendations Structural support – We also recommend a distance of at least 25 1/2" (650 mm) above electric cooktops to provide more workspace and easier cooking under the hood. – When selecting an installation height, always take the user height into consideration. - Page 27 Installation " " For vented mode: – Place a section of the exhaust ducting in the ceiling and feed it down through the cross-sectional area as illustrated. Exhaust ducting of approx. 27 9/16" (700 mm) length is dai3435aus required between the ceiling and the hood exhaust socket.
- Page 28 Installation Use a knife to release the four spacers and the two covers from the spacer frame supplied. Drill four holes 3/8" (10 mm), approx. 4 1/2" (115 mm) deep for the plugs supplied. Place the four plugs in the holes and ...
- Page 29 Installation The spacer frame can be installed between the chimney and the ceiling. This creates a shadow which gives the illusion of a gap between the ceiling and the chimney. This is useful if the Mount the spacer frame onto the ceiling is not level or is uneven.
- Page 30 Installation Hang the installation frame on the Align the installation frame and four screws. The front of the frame is secure it with the screws. marked with a "V." The spacers, which were removed If using the spacer frame, place the from the spacer frame at the start, two covers into the fixing holes.
- Page 31 Installation Holding the installation frame securely, remove the two fixing screws and extend the installation frame to its maximum length. Replace the screws. The directional unit from recirculation kit DUI 32 (optional accessory) is installed for recirculation mode (RM): ...
- Page 32 Installation Secure the exhaust socket to the hose using a hose clip. Secure the hose to the directional unit socket using a hose clip. Check that the hose is held securely. Push the telescopic chimney over the installation frame: –...
- Page 33 Installation Fit the four telescopic chimney Bend back the two retaining tabs. clamps. When the screws are Push the chimney over the telescopic tightened, the clamps spread out and chimney and bend the retaining tabs push the telescopic expansion piece outwards again to prevent the upwards.
- Page 34 Installation A non-return flap is supplied with the hood or is already fitted in the exhaust socket of the motor unit (depending on model). With vented mode (AE) insert the non-return flap in the exhaust socket if your ducting system is not equipped with one.
- Page 35 Installation Connect the power cord. See "Electrical connection." Unscrew both screws from the installation frame again. Place the exhaust ducting onto the The canopy can now be adjusted to the exhaust socket. desired height, observing the permissible height ranges: –...
- Page 36 Installation Hold the chimney securely, bend Raise the canopy to the desired height and secure it with the screws. back the retaining tabs and carefully lower it. The chimney will locate in the cut-out in the canopy.
- Page 37 Installation With recirculation mode (RM) ventilation hoods, insert the OdorFree Charcoal Filter. Remove the grease filters from the hood. Insert the safety screw on the inside. Carefully remove the protective foil from the grease filters. Reinsert the grease filters.
-
Page 38: Exhaust Duct
Exhaust duct – Make sure that all connections are WARNING: Danger of toxic fumes. secure and airtight. Gas cooking appliances release carbon monoxide that can be Remember that any constriction of harmful or fatal if inhaled. the airflow will reduce extraction To reduce the risk of fire and to performance and increase operating properly exhaust air, the exhaust... -
Page 39: Condensate Trap
Exhaust duct Condensate trap In addition to insulating the exhaust duct, we recommend installing a condensate trap to collect and evaporate any condensate which might accumulate. Condensate traps are available for exhaust ducts with a diameter of 5" (125 mm) or 6" (150 mm). ... -
Page 40: Electrical Connection
If there is any question concerning the electrical connection of this appliance to your power supply, please consult a licensed electrician or call Miele’s Technical Service Department. WARNING: THIS APPLIANCE MUST BE GROUNDED... -
Page 41: Service And Warranty
Service and warranty For faults that you cannot resolve on your own, please contact your Miele dealer or Miele Technical Service. The telephone number for the Technical Service Department is listed at the back of these instructions. When contacting Miele, please state the model and serial number of your ventilation hood. -
Page 42: Technical Data
Technical data Fan motor 350 W Cooktop lighting 4 x 20 W Total connected load 430 W Voltage, Frequency 120 V AC, 60 Hz Fuse rating 15 A Weight 81.4 lbs (37 kg) Optional accessories for recirculation mode: Recirculation kit DUI 32 and OdorFree Charcoal Filter DKF 12... - Page 43 Technical Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Headquarters and Miele Centre Princeton, NJ 08540 161 Four Valley Drive 800-843-7231 Phone: Vaughan, ON L4K 4V8 609-419-9898 www.miele.ca 609-419-4298...
- Page 44 DA 390-6 en-US M.-Nr. 09 968 400 / 00...