2 k Ω resistance maximum). The active level is user-configurable. Do not coil excess wire inside the enclosure. Seal the wire entrance with the plug Mirror with expanded view showing the angle provided. adjustment markings. Bosch Security Systems | 1/05 | 4998122424F...
Page 4
Setup Without S/U and WT Remote Control Panel Inputs.) 2 - Sensitivity (Refer to Section 5.5 Setup for Remote Control Alarm Memory and LED Operation Using S/U and WT Inputs.) 3 - Set/Unset polarity (Refer to Section 5.4.) Bosch Security Systems | 1/05 | 4998122424F...
Set walk through the outer edge of the coverage area daily and observe the LED operation (if used). This also assures an alarm output prior to arming. Bosch Security Systems | 1/05 | 4998122424F...
Figure 10: Curtain Mirror Coverage (optional OMLR93) 21 m 1.9 m 1.9 m 21 m 1 - Top view 2 - Side view, mirror adjusted to -2° 3 - Front polished surface view, mirror segment for pattern reference Bosch Security Systems | 1/05 | 4998122424F...
Air Humidity (EN60721): <95% rH, non-condensing Housing Protection IP41/IK02 (EN60529, EN50102): B338 Ceiling Mount Bracket Options OMLR93-3 Curtain Mirror Misaligning these brackets can reduce the detector’s range and increase the dead zone area. Bosch Security Systems | 1/05 | 4998122424F...