Table of Contents
Advertisement
30
en | Maintenance
3.2.4
Power Supply
The chassis includes a redundant, hot-swappable power supply. The power supply is auto-
switching capable. This enables it to automatically sense and operate at a 100 V to 240 V input
voltage.
Power Supply Failure
If one power supply unit fails, the system will not shut down but you should replace the unit.
Replacing the unit can be done without powering down the system. Replacement units can be
ordered directly from Bosch RMA desk.
Replacing the Power Supply
1.
2.
3.
4.
- | V1 | 2011.10
If your chassis includes a redundant power supply (at least two power modules), you can
leave the system running and remove only one power supply. If your system has only one
power supply, you must power-down the system and unplug the power cord before
replacing the power supply.
Push the release tab (on the back of the power supply) as illustrated.
Pull the power supply out using the handle provided.
Replace the failed power module with the same model.
Hardware Installation Manual
Bosch Recording Station Appliance
Bosch Security Systems
Advertisement
Table of Contents
