hit counter script
Download
Share
Print this page
Nokia 700 Service Manual
  1. Manuals
  2. Brands
  3. Nokia Manuals
  4. Cell Phone
  5. 700
  6. Service manual

Nokia 700 Service Manual

Rm-670
Hide thumbs Also See for 700:

Advertisement

Quick Links

Download this manual See also: User Manual
Service Manual for L1 and L2
Nokia 700
RM-670
Key features
New Symbian Belle software platform
3.2" nHD AMOLED screen
Tap and share with NFC technology
Personalizable home screens with different size widgets
Exploded view
Assembly hints
Product controls and interfaces
Disassembly steps
More
Service devices
More
Service concept
More
More
More
More
©2011 Nokia
Disassembly video
Solder components
More
More

Advertisement

loading

Related Manuals for Nokia 700

Summary of Contents for Nokia 700

  • Page 1 Service Manual for L1 and L2 Nokia 700 RM-670 Key features New Symbian Belle software platform 3.2" nHD AMOLED screen Tap and share with NFC technology Personalizable home screens with different size widgets Exploded view Disassembly steps Disassembly video More...

  • Page 2: Exploded View

    Service Manual Level 1 and 2 Exploded view Nokia 700 RM-670 A-COVER ASSEMBLY (I0001 - I0006) A-COVER I0001 EARPIECE GASKET CAPTURE SWITCH I0006 I0004 EARPIECE I0005 BATTERY CONNECTOR SEALING I0019 LIGHT SWAP PACKAGE (I0008, I0009) LIGHT SWAP PWB I0008 NFC MECHANICAL ASSEMBLY...

  • Page 3: Disassembly Steps

    Service Manual Level 1 and 2 Disassembly steps Nokia 700 RM-670 You must use the Nokia Standard Toolkit version 2. You will also need a DC plug, an AV plug and the SS- 88 camera removal tool. Protect the A-COVER with protective film.
  • Page 4 Use the dental tool to peel out one corner of the IHF DETAIL. Be careful not to injure yourself or damage the A-COVER with the sharp end of the dental tool. Remove the IHF DETAIL with the tweezers. Do not use it again. Discard it.
  • Page 5 Open the BATTERY COVER by using the release button. Lift up and remove the BATTERY COVER. Unscrew the six Torx+ size 4 screws in the order shown. Do not use them again. Discard them.
  • Page 6 Press down the A-COVER from the top side with your thumb and slide the SRT-6 to direction shown to release the right side of the A-COVER. This way the hooks holding the A-COVER will not get damaged. Keep pressing down the A-COVER from the top side and open the top side of the A-COVER by sliding the SRT-6 to direction shown.
  • Page 7 Open also the left side of the A-COVER by sliding the SRT-6 towards the bottom end. Carefully pull the A-COVER to direction shown to release the bottom end.
  • Page 8 Lift up the right side of the A-COVER as shown. Note that the A-COVER must not be lifted up completely to avoid damaging the flexes underneath. Use the SS-93 to open the UI connector. Be careful not to damage the connector or any nearby components.
  • Page 9 Open also the DISPLAY connector with the SS-93. Be careful not to damage the connector or any nearby components. The A-COVER can now be separated.
  • Page 10 Lift up the EARPIECE with the dental tool. Remove the EARPIECE with the tweezers. Do not use it again. Discard it. Remove also the EARPIECE GASKET with the dental tool. Do not use it again. Discard it.
  • Page 11 Remove the CAPTURE SWITCH with the tweezers. Use the sharp end of the SS-93 to lift up the side keys from their housing.
  • Page 12 Use the SS-93 to lever out the ENGINE BOARD from the shown place. Use the sharp end of the SS-93 to lever out the opposite side of the ENGINE BOARD.
  • Page 13 Carefully lift up the ENGINE BOARD from the bottom side. Note that the ENGINE BOARD flex is attached to the D-COVER with the TEST PAD ADHESIVE. Be careful not to damage the ENGINE BOARD. The ENGINE BOARD can now be separated.
  • Page 14 Remove the BATTERY CONNECTOR SEALING with the tweezers. Pull the MAIN ANTENNA to direction shown and remove it.
  • Page 15 If the SECONDARY ANTENNA is attached to the ENGINE BOARD with the antenna hook. To release the SECONDARY ANTENNA push down with finger from the center and slightly lift up both sides of the SECONDARY ANTENNA.
  • Page 16 While holding the sides up, twist the SECONDARY ANTENNA counter-clockwise and separate it from the ENGINE BOARD. If the SECONDARY ANTENNA is not attached to the ENGINE BOARD with the antenna hook.
  • Page 17 After separating the ENGINE BOARD from the D-COVER the SECONDARY ANTENNA stays in the D-COVER. Use the sharp end of the SS-93 to lift up the SECONDARY ANTENNA from the shown place. Be careful not to damage the shown D-COVER grounding spring under the SECONDARY ANTENNA.
  • Page 18 Remove the SECONDARY ANTENNA with the tweezers. Remove the USB BOOT with the tweezers.
  • Page 19 Remove the CAMERA with the camera removal tool ss-88. Use the SS-93 to open the NFC MECHANICAL ASSEMBLY connector. Be careful not to damage the connector or any nearby components.
  • Page 20 Remove the NFC MECHANICAL ASSEMBLY with the tweezers. Remove the FLASH REFLECTOR with the tweezers.
  • Page 21 Use the AV plug to lift up and remove the AV JACK. Use the DC plug to lift up and remove the DC JACK.
  • Page 22 Use the SS-93 to peel off the TEST PAD ADHESIVE and remove it with the tweezers. Do not use it again. Discard it. The Nokia 700 disassembly is now complete. -END OF DISASSEMBLY- ©2011 Nokia...

  • Page 23: Assembly Hints

    Service Manual Level 1 and 2 Assembly hints Nokia 700 RM-670 Tighten the six TORX + size 4 screws to the torque of 10 Ncm in the order shown. ©2011 Nokia...

  • Page 24: Service Devices

    SS-88 Camera removal tool Battery BP-5Z Nokia Standard Toolkit (v2) For more information, refer to the Service Bulletin (SB- 011) on Nokia Online. Supplier or manufacturer contacts for tool re-order can be found in “Recommended service equipment” document on Nokia Online. ©2011 Nokia...

  • Page 25: Solder Components

    Service Manual Level 1 and 2 Solder components Nokia 700 RM-670 X2400 S2406 S2407 S2401 X7415 X2401 BOTTOM X6389 X7405 F3390 X6299 F3301 G2200 X7402 ©2011 Nokia...
  • Page 26 Service Manual Level 1 and 2 Product controls and interfaces Nokia 700 RM-670 1 — Nokia AV 3.5 mm connector 2 — Proximity Sensor 3 — Call key 4 — Micro USB 5 — Charger connector 6 — Ambient Light Sensor 7 —...
  • Page 27 Service Manual Level 1 and 2 Service concept Nokia 700 RM-670 Service CA-101 software FLS-5 Care Dummy Battery with power supply via Nokia charger or product specific battery Transceiver ©2011 Nokia...