Page 1
WHED20 Model How to install, operate and maintain your Undersink Drinking Water System Do not return unit to store If you have questions or concerns when installing, operating or maintaining your Undersink Drinking Water Filter System call our toll free number:...
NOTE: Be sure to allow a minimum space of 1-1/2" under the system Fig. 1 for removing the filter cartridges, in order to change the cartridges. Questions? Visit www.whirlpool.com or call toll free 1-866-986-3223...
Water Filter inlet thread sealing tape on threads cold water shutoff cold water pipe 3/8" compression fitting insert ferrule cold water pipe 3/8" tubing to Water Filter inlet cold water shutoff Fig. 2 Questions? Visit www.whirlpool.com or call toll free 1-866-986-3223...
3. Install battery in base. See “Battery Change” section for instructions. faucet 1/4 turn to connect faucet to base faucet base screw rubber washer toggle bolt hole in sink or countertop Fig. 3 Questions? Visit www.whirlpool.com or call toll free 1-866-986-3223...
3/4" engagement Incorrect partial engagement Fig. 4 Disconnect Tubing: 1. Push the collet inward and hold with a finger while pulling the tubing out. collet (depress to remove tubing) tubing Fig. 5 Questions? Visit www.whirlpool.com or call toll free 1-866-986-3223...
Whirlpool Undersink Drinking Water Filter system model WHED20 with replacement element pack WHEEDF conforms to NSF/ANSI 42 and 53 for the specific performance claims as verified and substan- tiated by test data.
This warranty applies to consumer-owned installations only. R Registered trademark/TM Trademark of Whirlpool, USA. Manufactured under license by Ecodyne Water Systems, Woodbury, Minnesota E 2005 Whirlpool Corporation. All rights reserved. Questions? Visit www.whirlpool.com or call toll free 1-866-986-3223...