Wds With Ap Mode - D-Link DAP-2695 User Manual
Wireless ac dual band access point ac1750
Hide thumbs
Also See for DAP-2695:
- User manual (90 pages) ,
- Quick installation manual (88 pages) ,
- Quick install manual (41 pages)
Table of Contents
Advertisement
D-Link DAP-2695 User Manual
WDS with AP Mode
Wireless Band:
Select either 2.4GHz or 5GHz from the drop-down
menu.
Mode:
WDS with AP mode is selected from the drop-down
menu.
Network Name (SSID):
Service Set Identifier (SSID) is the name designated
for a specific wireless local area network (WLAN).
The SSID's factory default setting is dlink. The SSID
can be easily changed to connect to an existing
wireless network or to establish a new wireless
network.
SSID Visibility:
Enable or Disable SSID visibility. Enabling this
feature broadcasts the SSID across the network,
thus making it visible to all network users.
Auto Channel Selection:
Enabling this feature automatically selects
the channel that will provide the best wireless
performance. This feature is not supported in WDS
with AP mode. The channel selection process only
occurs when the AP is booting up.
Channel:
All devices on the network must share the same
channel. To change the channel, use the drop-down
menu to make the desired selection. (Note: The
wireless adapters will automatically scan and match
the wireless settings.)
Channel Width:
Allows you to select the channel width you would
like to operate in. Select 20 MHz if you are not using
any 802.11n wireless clients. Auto 20/40 MHz allows
you to connect to both 802.11n and 802.11b/g or
802.11a wireless devices on your network.
14
- Quick Links:
- Connections
- Web User Interface
- Access Point Mode
Hide quick links:
Advertisement
Table of Contents
