Shutoff Valve; Installing The Refrigerator - GE 16 Owner's Manual And Installation Instructions
Top-freezer refrigerators
Hide thumbs
Also See for 16:
- Owner's manual and installation instructions (138 pages) ,
- Owner's manual (88 pages) ,
- Installation manual (54 pages)
Table of Contents
Advertisement
INSTALLING THE WATER LINE
1
CONNECT THE TUBING TO THE
7
REFRIGERATOR
NOTES:
sure the refrigerator power cord is not plugged into
the wall outlet.
supply has sand or particles that could clog the screen
line near the refrigerator. If using GE SmartConnect
Remove the access cover.
cap from the water valve
nut until it is hand tight, then tighten one additional
turn with a wrench. Overtightening may cause leaks.
vertical position. You may need to pry open the clamp.
1/4"
Copper
Refrigerator Connection
Reattach the access cover.
Installation Instructions
™
™
™
Clamp
1/4" Compression
Nut
Ferrule
SmartConnect
™
12
(CONT.)
TURN THE WATER
8
ON AT THE
SHUTOFF VALVE
Tighten any connections
that leak.
INSTALLING THE REFRIGERATOR
9
Plug in the refrigerator.
or against the wall. Push the
START THE ICEMAKER
10
On power switch models, set the icemaker power
switch to the 0N position. On feeler arm models,
move the feeler arm to the ON
Power
switch
Feeler arm model
NOTE: In lower water pressure conditions, the water
valve may turn on up to 3 times to deliver enough
water to the icemaker.
OFF
ON
Power switch model
Feeler Arm in the
STOP
Feeler Arm in
the ON
Advertisement
Table of Contents
