Before you call for service...
Save time and money! Review the charts on the following
Problem
Refrigerator does not
operate
Vibration or rattling (slight
vibration is normal)
Fresh food or freezer
compartment too warm
Motor operates for
long periods or cycles
(Modern refrigerators
with more storage space
and a larger space and
a larger freezer require
more operating time.
They start and stop
often to maintain even
temperatures.)
Frost or ice crystals on
frozen food (frost within
package is normal)
Automatic icemaker does
not work (on some models)
Frequent "buzzing" sound
supply to the refrigerator
has not been connected
Cubes too small
Slow ice cube freezing
18
Possible Causes
Refrigerator in defrost cycle.
Temperature control dial in OFF
position.
Refrigerator is unplugged.
The fuse is blown/circuit breaker is
tripped.
Roller screws or leveling legs need
adjusting.
Temperature control dial not set cold
enough.
Warm weather or frequent door
openings.
Door left open.
Package blocking air duct in freezer
compartment.
plugged in.
Often occurs when large amounts of
food are placed in refrigerator.
Door left open.
Hot weather or frequent door
openings.
Temperature control dial set at the
coldest setting.
Grille and condenser need cleaning.
Door left open.
Too frequent or too long door
openings.
Icemaker is not on.
connected.
Freezer compartment too warm.
Piled up cubes in the storage bin
Icemaker is on but the water
refrigerator to water line may be
clogged.
Door left open.
Temperature control dial not set cold
enough.
What To Do
Move the temperature control dial to a temperature setting.
Push the plug completely into the outlet.
See Rollers and Leveling Legs.
See About the temperature control dial.
Set the temperature control dial one step colder. See About
the temperature control dial.
Check to see if package is holding door open.
compartment.
Wait 24 hours for the refrigerator to completely cool down.
This is normal.
Check to see if package is holding door open.
This is normal.
See About the temperature control dial.
See Care and cleaning.
Check to see if package is holding door open.
Move the feeler arm to the ON
power switch to the ON position
See Installing the water line.
Wait 24 hours for the refrigerator to completely cool down.
Move the feeler arm to the STOP
power switch to the OFF position, Keeping it on will
the
damage the water valve..
Check to see if package is holding door open.
See About the temperature control dial.