Reversing The Door Swing - GE 16 Owner's Manual And Installation Instructions
Top-freezer refrigerators
Hide thumbs
Also See for 16:
- Owner's manual and installation instructions (138 pages) ,
- Owner's manual (88 pages) ,
- Installation manual (54 pages)
Table of Contents
Advertisement
2
REVERSING THE DOOR SWING
REVERSING THE DOOR HANDLES
5
5.4 Transfer Freezer Door Handle
5.4.1 Remove the screw
holding the handle
to the top of the
door and the two
screws holding the
of the door.
5.4.2 Remove the handle.
5.4.3 Remove the screw from the
right top edge of the door
and insert it into the handle
screw hole on the left side.
5.4.4 Transfer the door stop as shown in preceding
section 5.2.
5.4.5 Attach the handle to the
right edge of the door with
screws.
RE-HANGING THE DOORS
6
6.1 Re-hang the fresh food door
6.1.1
hinge pin. Be sure the washer is in place on
the pin.
Hinge
Bracket
Installation Instructions
(CONT.)
Top
TOP
Bottom
BOTTOM
Plastic
Washer
16
(CONT.)
RE-HANGING THE DOORS
6
6.1.2 Insert the pin on the center hinge into the socket in the
top of the door. Place the spacer, then the washer, on
the hinge pin.
NOTE: The center hinge must
mounted on the left side.
6.1.3
into position, slide the hinge under the head of the screw
screws securely.
6.2 Re-hang the freezer door
6.2.1 Lower the freezer door
onto the center hinge
pin. Be sure the
washer and spacer
are in place on the pin.
6.2.2
6.2.3.
across the front. Tighten the top hinge screws. Do not
overtighten these screws–tighten them until they are
just snug, then turn them another one-half turn.
(CONT.)
Hinge Pin
Plastic Washer
and Spacer
Center Hinge Pin
Plastic Washer
and Spacer
Advertisement
Table of Contents
