Table of Contents
Advertisement
MBE Mounts and Adapters
3.
4.
CAUTION!
Ensure that the mounting fasteners have a minimum pull-out
strength of 300 kg (661.4 lbs) per screw.
NOTICE!
The fasteners and mounting surface must be capable of
supporting a maximum load of 25 kg (55 lbs).
3.2
Mounting the MBE-27/28 with the MBE-17
Wall Adapter
The MBE-17 Wall-Mount Adapter provides increased support for
the MBE-27 and the MBE-28 bracket. The MBE-17 also provides
a mounting location for the EXMB.020B L-bracket, a heavy-duty
bracket used to mount an additional piece of equipment, such
as an illuminator.
The combination of the MBE-27/28 and the MBE-17 can support
a total weight of 45 kg (100 lbs).
Note: The MBE-17 Wall-Mount Adapter has two distinct hole
patterns for attaching various mounting brackets. Use the 94.2
x 40 mm (3.71 x 1.57 in.) hole pattern with the MBE-27/28
bracket. (Use the 86 x 40 mm hole pattern with the old
EXMB.023 or EXMB.028 bracket.)
Refer to Section 6 Dimensional Outlines, page 20, for detailed
dimensional drawings.
Bosch Security Systems, Inc.
Drill the four (4) holes in the installation location.
Using four bolts or studs (not supplied) with nuts,
washers, and lock washers, fasten the MBE-27/28 to its
mounting location and tighten all nuts securely.
Note: The minimum diameter bolt (or stud) required is
6 mm (.25 in.).
Installation Guide
MBE-27/28 Wall Mount Applications | en
9
| 3.0 | 2011.10
Advertisement
Table of Contents
