Related Manuals for Miele DA 6590 D
Summary of Contents for Miele DA 6590 D
- Page 1 Operating and Installation Instructions Ventilation System DA 6590 D en - US To prevent accidents and appliance damage, read these instructions before installation or use. M.-Nr. 09 523 580...
-
Page 2: Table Of Contents
Contents IMPORTANT SAFETY INSTRUCTIONS....... . . 3 Description of functions ..........7 Guide to the ventilation system . -
Page 3: Important Safety Instructions
Use this appliance only in the manner intended by the manufacturer. Read these instructions carefully If you have questions, contact Miele. before installing or using the b) Before servicing or cleaning the Ventilation System. appliance, switch power off at the... - Page 4 IMPORTANT SAFETY INSTRUCTIONS d) Before connecting the appliance to the power supply make sure that the ,WARNING voltage and frequency listed on the data plate correspond with the TO REDUCE THE RISK OF A household electrical supply. COOKTOP GREASE FIRE: This data must correspond to prevent appliance damage.
- Page 5 IMPORTANT SAFETY INSTRUCTIONS ,WARNING Do not allow children to play with or operate the appliance or its controls. TO REDUCE THE RISK OF Supervise its use by the elderly or INJURY TO PERSONS IN THE infirm. EVENT OF A COOKTOP Always turn on the hood when using GREASE FIRE, OBSERVE THE the cooktop to prevent damage from...
- Page 6 IMPORTANT SAFETY INSTRUCTIONS Installation g) Do not install this hood over cooktops that burn solid fuel. ,WARNING h) Provided a larger distance is not TO REDUCE THE RISK OF given by the manufacturer of the FIRE, ELECTRIC SHOCK, OR cooktop, follow the minimum safety distances between a cooktop and the INJURY TO PERSONS, bottom of the hood given in the...
-
Page 7: Description Of Functions
Description of functions Air extraction The air is drawn in via the glass or stainless steel panels and cleaned by the grease filters. Then the air is released outdoors. The hood comes equipped with a non-return flap. This flap automatically closes when the hood is turned off so that no exchange of outside air and room air can occur. -
Page 8: Guide To The Ventilation System
Guide to the ventilation system... - Page 9 Guide to the ventilation system Chimney extension Filter button The grease filter symbol l of the filter Chimney button comes on when the grease Canopy filters need to be cleaned. Control panel The — symbol has no function with this Overhead lighting model.
-
Page 10: Operation
Operation Turning the fan on K Automatically switching back the intensive power level ^ Press the On/Off button K. The intensive level can be programmed The fan turns on to Level 2 to automatically switch back to level 3 and the K symbol and the 2 of the after 10 minutes. -
Page 11: Delayed Shut Down 5 ¢15
Operation Delayed shut down 5 ¢15 Overhead lighting I For both air extraction and recirculation Turning the overhead lighting on it is recommended to run the fan for several minutes after cooking is The overhead lighting can be turned on completed. -
Page 12: Filter Timer
Operation Automatic safety shut-off The factory setting for the grease filter timer is 30 hours. You can adjust the The fan will turn automatically off 10 time to 20, 30, 40 or 50 hours. hours of use. The lighting however will ^ Press the On/Off button K to turn the remain on. - Page 13 Operation Checking the elapsed operating time Even before the maximum operating time has been reached, you can check what percentage of the time has elapsed. ^ Press the On/Off button K to turn the fan on. ^ Press the timer button [— – –...
-
Page 14: Cleaning And Care
Cleaning and care ,WARNING Avoid: TO REDUCE THE RISK OF – cleaning agents containing soda, FIRE, ELECTRIC SHOCK, OR acids or chlorides, INJURY TO PERSONS, – abrasive cleaning agents OBSERVE THE FOLLOWING: e.g. powder or cream cleansers, – abrasive sponges, e.g. pot scourers Before cleaning or servicing the or sponges which have been hood, disconnect it from the power... -
Page 15: Panels And Grease Filters
Cleaning and care Panels and grease filters Special instructions for glass surfaces The glass or stainless steel panels and ^ The glass edge can be cleaned the reusable metal grease filters using a household glass cleaner. remove solid particles from the vented kitchen air (grease, dust, etc.) and prevent soiling of the ventilation hood. - Page 16 Use a wash program with a max. temperature of 150°F (65°C). In a Miele dishwasher use the "Normal" program. Use the recommended amount of dishwasher detergent. Overuse could destroy the filter.
-
Page 17: Resetting The Grease Filter Timer
Cleaning and care Resetting the grease filter timer Reset the timer each time you clean the grease filters. ^ With the fan running, press and hold the timer button [— for about 3 seconds, until only the 1 is flashing. The grease filter symbol [ goes out. -
Page 18: Changing The Light Bulbs
Cleaning and care Changing the light bulbs ,WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: Before changing the light bulbs, disconnect the hood from the power supply, see "Important Safety Instructions". When in use halogen bulbs become extremely hot, and can burn your hands. -
Page 19: After Sales Service
Miele’s Service department, Extended Service Contracts offered by other providers for Miele products will not be recognized by Miele. Our goal is to prevent unauthorized (and untrained) service personnel from working on your Miele products, possibly doing further damage to them, you and/or your home. -
Page 21: Installation Instructions
Installation Instructions Read these instructions and the "Important Safety Instructions" before installing this ventilation system. The installation steps are described in the enclosed "Installation Diagram". Leave these instructions with the appliance for the consumer/user. Information is subject to change. Please refer to our website to obtain the most current product specification, technical &... -
Page 23: Caring For The Environment
Caring for the environment Disposal of packing material Disposal of an old appliance The cardboard box and packing Old appliances may contain materials materials protect the appliance during that can be recycled. Please contact shipping. They have been designed to your local recycling center about the be biodegradable and recyclable. -
Page 24: Appliance Dimensions
Appliance dimensions 1) Opening for exhaust duct and power cord Exhaust connection C 6" (150 mm) The exhaust connection in the ceiling plate is not secured in the center. This makes installation possible if the connection in the ceiling is not centered above the cooktop. - Page 25 Do not install this exhaust hood over cooktops burning solid fuel. Provided a larger distance is not given by the manufacturer of the cooktop, follow the minimum safety distances between a cooktop and the bottom of the hood: Miele Cooktops Non-Miele Cooktops Electric Cooktops 24"...
-
Page 26: Structural Support
Structural support The ceiling mounting plate will CAUTION support the weight of the hood. This When cutting or drilling into the wall ceiling plate must be attached to or ceiling, do not damage electrical rigid structural framing that is wiring and other hidden utilities. supported in its entirety by the ceiling joists, or to the ceiling joists directly. -
Page 27: Installation
Installation Before installation read the information in the "Appliance Dimensions" and " Important Safety 4 levelling plates for correcting an Instruction" chapters. uneven ceiling. Under certain conditions, there is a danger of poisonous fumes by when the ventilation system and a furnace drawing interior air run at the same time. -
Page 28: Air Extraction
Air extraction Exhaust ducting and connections WARNING Use smooth or flexible pipework made from approved non-flammable Danger of toxic fumes. materials for exhaust ducting. Gas cooking appliances release To achieve the most efficient air extraction and quietest noise levels, carbon monoxide that can be consider the following: harmful or fatal if inhaled. -
Page 29: Condensate Trap
Air extraction Condensate trap optional accessory – If the exhaust is ducted into an inactive flue, the air must be expelled parallel to the flow direction of the flue. Never connect an exhaust hood to an active chimney, dryer vent, flue, or room venting ductwork. -
Page 30: Electrical Connection
If there is any question concerning the electrical connection of this appliance to your power supply, please consult a licensed electrician or call Miele’s Technical Service Department. See back cover for contact information. WARNING: THIS APPLIANCE MUST BE... -
Page 31: Technical Data
Fuse rating ....15 A Weight DA 6590 D ... . 73 lbs (33 kg) - Page 32 Alteration rights reserved / 5012 M.-Nr. 09 523 580 / 01 INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.