Related Manuals for Fujitsu AD11
Summary of Contents for Fujitsu AD11
- Page 1 AD11 MAINBOARD MANUAL DOC No.: M00604 Rev. : A0 Date : 11, 2000 Part No. :25-11564-20...
-
Page 2: Handling Precautions
Notice Handling Precautions Warning: 1. Static electricity may cause damage to the integrated circuits on the motherboard. Before handling any motherboard outside of its protective packaging, ensure that there is no static electric charge in your body. 2. There is a danger of explosion if the battery is incorrectly replaced. -
Page 3: Table Of Contents
Table of Contents Table of Contents Chapter 1 Overview Package Checklist ................. 1-2 The AD11 Mainboard ............... 1-3 Main Features ................1-4 ACPI Ready .................. 1-6 Chapter 2 Installation Procedures Quick Reference (from Page 2-2 to 2-6) .......... 2-2 Mainboard Layout ..............2-2 1). - Page 4 AD11 Mainboard Manual Blue Tooth Audio Port Connector: BT_AUDIO ....2-19 CD Audio-In Connectors: CD_IN1, AUX_IN ....2-20 Optional Audio Alert II Module Connector: NOVUS ..2-20 Infrared Connector: IR ............2-21 Front Panel Block Connector: FPNL ......... 2-22 PS/2 Keyboard and Mouse Connector: PS2_KB, PS2_MS 2-23 Universal Serial Bus Connectors: Rear USBs, Front USBs 2-23 Printer Connector: LPT .............
-
Page 5: Chapter 1 Overview
Onboard AC97 sound ensures high quality audio, but with the option of being disabled through the BIOS. AD11 has 5 PCI (32 bit/33 MHz) slots. User can plug many kinds of PCI add-on cards. The mainboard also has one CNR (Communication Networking Riser) slot. - Page 6 AD11 Mainboard Manual In addition, the 1stMainboard AD11 is equipped with 2 dual channeled en- hanced PCI bus master IDE connectors. Standard I/O connections include 2 serial ports, 1 parallel port, 1 PS/2 mouse and keyboard connector, 2 USB connectors, 2 front USB pin-headers, and 1 media connector ( Line-In, Line- Out, Mic-In, 1 Midi/game port).
-
Page 7: The Ad11 Mainboard
Overview The AD11 Mainboard 1 - 3... -
Page 8: Main Features
AD11 Mainboard Manual Main Features n Easy Installation ||BIOS with support for Plug and Play, auto detection of IDE hard drives, ||LS-120|drives, IDE ZIP drives, Windows 95, Windows 98, Windows ME, ||Windows NT, Windows 2000, |and OS/2. n Leading Edge Chipset... - Page 9 Overview n CNR, AGP, and PCI Expansion Slots One CNR audio/modem slot, one AGP Bus expansion slot, and five PCI Bus expansion slots provided the room to install a full range of add-on cards. n Compact Onboard Audio Subsystem Embeded in VIA 686B, an integrated PCI-mastering dual full-duplex di- rect-sound AC97-link-compatible audio subsystem.
-
Page 10: Acpi Ready
AD11 Mainboard Manual ACPI Ready This mainboard fully implements the new ACPI (Advanced Configuration and Power Interface) 1.0B Hardware and BIOS requirement. If you install ACPI aware of operating system, such as Windows 98, you fully utilized the power saving under ACPI. (Windows ME/2000 Professional supports ACPI func- tions.) -
Page 11: Chapter 2 Installation Procedures
Installation Procedures Chapter 2 Installation Procedures The mainboard has several user-adjustable jumpers on the board that allow you to configure your system to suit your requirements. This chapter contains information on the various jumper settings on your mainboard. To set up your computer, you must complete the following steps: n Step 1 - Set system jumpers n Step 2 -... -
Page 12: Quick Reference (From Page 2-2 To 2-6)
AD11 Mainboard Manual Quick Reference (from Page 2-2 to 2-6) Mainboard Layout 2 - 2... -
Page 13: Clear Cmos, Clear Password, Fsb Speed Select
Installation Procedures Clear CMOS, Clear Password, FSB Speed Select, Auto Detect Freq. Ratio (ADR_EN, ADR) Auto Detect CPU Core Voltage (ADV_EN, ADV) 2 - 3... - Page 14 AD11 Mainboard Manual NOTE: Please set the jumper ADV_EN at Disable before you adjust the switch ADV. 2 - 4...
- Page 15 Installation Procedures NOTE: Please set the jumper ADR_EN at Disable before you ad- just the switch ADR. 2 - 5...
-
Page 16: Front Panel Block Cable Connection
AD11 Mainboard Manual Front Panel Block Cable Connection CPU Fan Installation This connector is linked to the CPU fan. When the system is in suspend mode, the CPU fan will turn off; when it reverts back to full on mode, the fan will turn back on. -
Page 17: Set System Jumpers/Switches
Installation Procedures 1). Set System Jumpers/Switches Jumpers are used to select the operation modes for your system. Some jump- ers on the board have three metal pins with each pin representing a different function. A “1” is written besides pin 1 on jumpers with three pins. To set a jumper, a black cap containing metal contacts is placed over the jumper pin/s according to the required configuration. -
Page 18: Clear Cmos: Clr_Cmos
AD11 Mainboard Manual Clear CMOS: CLR_CMOS The jumper allows you to enable or to disable the password setting. You may need to adjust it if you forget your password. To clear the password setting: (1).Turn off your computer, (2). Enable this feature by setting it at Enable, (3). -
Page 19: Fsb Speed Select: 100Mhz/133Mhz
Installation Procedures FSB Speed Select: 100MHz/133MHz The jumper allows users to select the front side bus speed. Auto Detect CPU Core Voltage: ADV_EN The 3-pin jumper allows the system to detect the processor core voltage auto- matically when it stays at Enable. WARNING: Voltage and frequency above CPU’s original specifi- cations are not guaranteed to be stable. -
Page 20: Cpu Core Voltage Setting: Adv
AD11 Mainboard Manual CPU Core Voltage Setting: ADV The switch allows you to set the CPU core voltage to approach the best performance according to the table below after you set the jumper ADV at Disable. Auto Detect CPU Clock: ADR_EN The 3-pin jumper allows the system to detect the processor clock automati- cally when it stays at Enable;... -
Page 21: Bus Ratio Setting: Adr
Installation Procedures Bus Ratio Setting: ADR The switch allows you to set the bus ratio to approach the best performance according to the table below after you set the jumper ADR at Disable. NOTE: Please set the jumper ADR_EN at Disable before you ad- just the switch ADR. -
Page 22: Install Memory Modules
AD11 Mainboard Manual 2). Install Memory Modules Locate the memory moduleslots on the mainboard. Install the memory module straight down into the memory module slot using both hands. 3. The clip on both ends of the memory module slot will close up to hold the memory module in place when the memory module reaches the slot’s... - Page 23 Installation Procedures CAUTION: 1. The heat sink and fan you installed must be approved by AMD. 2. The mainboard must be placed on a solid place to avoid shaking |||||while install the heat sink and fan on the board. 3. The heat sink must be contact with the CPU top tightly. 4.
-
Page 24: Install Expansion Cards
AD11 Mainboard Manual 4). Install Expansion Cards This section describes how to connect an expansion card to one of your system’s expansion slots. Expansion cards are printed circuit boards that, when connected to the mainboard, increase the capabilities of your system. -
Page 25: Connect Devices
Installation Procedures Holding the edge of the peripheral card, carefully align the edge connector with the expansion slot. Push the card firmly into the slot. Push down on one end of the expansion card, then the other. Use this “rocking” motion until the add-on card is firmly seated inside the expansion slot. -
Page 26: Ide Hdd Device Connectors: Primary, Secondary
AD11 Mainboard Manual IDE Device Connectors: PRIMARY, SECONDARY These two connectors are used for your IDE hard disk drives, CD drives, LS- 120|drives, or IDE ZIP drives. The red stripe of the ribbon cable must be the same side with the Pin 1. -
Page 27: Cpu Fan Connector: Cpu_Fan
Installation Procedures CPU Fan Connector: CPU_FAN This connector is linked to the CPU fan to lower the CPU temperature. Please refer to the CPU fan installation manual for more information. System Case Fan Connector: CHS_FAN The 3-pin connector allows you to link with the cooling fan on the system case to lower the system temperature. -
Page 28: Wake-On-Ring Connector: Wor
AD11 Mainboard Manual Wake-On-Ring Connector: WOR The 2-pin connector allows you to link with your modem card which outputs a WOR singal; the system can be turned on from the power-off status by a remote phone call via the modem card. -
Page 29: System Chassis Open Alarm Connector: Chassis
Installation Procedures System Chassis Open Alarm Connector: CHASSIS The 2-pin male connector allows you to enable (or disable) system activation if and when the system’s out casing is being removed. A high level signal to the connector will indicate to the system that the chassis has been opened. Blue Tooth Audio Port Connector: BT_AUDIO The 4-pin connector allows you to link to an optional FIC-produced metal brakcet with Blue Tooth audio port. -
Page 30: Cd Audio-In Connectors: Cd_In1, Aux_In
AD11 Mainboard Manual CD Audio-In Connectors: CD_IN1, AUX_IN The CD_IN1, AUX_IN connectors are used for different types for CD drive audio in port. Optional Audio Alert II Module Connector: NOVUS The connector provides users with the linkages of optional Audio Alert II module. -
Page 31: Infrared Connector: Ir
Installation Procedures Infrared Connector: IR This 5-pin connector is used to link with your IR device to allow data trans- mission to another system that equipped with an IR device. 2 - 21... -
Page 32: Front Panel Block Connector: Fpnl
AD11 Mainboard Manual Front Panel Block Connector: FPNL This block connector includes the connectors for linking with IDE LED, sleep LED, power LED, power button, sleep button, reset button and speaker on the front panel of the system case. Please identify polarities of plug wires for the case speaker and LEDs. -
Page 33: Ps/2 Keyboard And Mouse Connector: Ps2_Kb, Ps2_Ms
Installation Procedures PS/2 Keyboard and Mouse Connector: PS2_KB, PS2_MS These two 6-pin female (PS/2 keyboard is purple color and PS/2 mouse is green color) connectors are used for your PS/2 keyboard and PS/2 mouse. Universal Serial Bus Connectors: Rear USBs, Front USBs These two black connectors integrated on the edge of the board are used for linking with USB peripheral devices. -
Page 34: Printer Connector: Lpt
AD11 Mainboard Manual Printer Connector: LPT This 25-pin D-Sub female burgundy-colored connector is attached to your printer. Serial Port Connectors: COM1, COM2 COM1 (9-pin D-sub male connector with teal color) and COM2 (9-pin D-sub teal male connector with teal color) allow you to connect with your devices that use serial ports, such as a serial mouse or an external modem. -
Page 35: Audio I/O Jacks: Line_Out, Line_In, Mic_In Fnt_Audio
Installation Procedures Audio I/O Jacks: LINE_OUT, LINE_IN, MIC_IN, FNT_AUDIO LINE_OUT (lime) can be connected to headphones or preferably powered speakers. LINE_IN (light blue) allows tape players or other audio sources to be recorded by your computer or played through the LINE_OUT. MIC_IN (pink) allows microphones to be connected for voice input. - Page 36 AD11 Mainboard Manual This Page Left Blank for Note 2 - 26...
-
Page 37: Chapter 3 Bios Setup
BIOS Setup Chapter 3 BIOS Setup The mainboard comes with the chip that Award BIOS that contains the ROM Setup information of your system. (This chip serves as an interface between the processor and the rest of the mainboard’s components.) This section explains the information contained in the Setup program and tells you how to modify the settings according to your system configuration. -
Page 38: Standard Cmos Setup
AD11 Mainboard Manual Standard CMOS Setup The Standard CMOS Setup screen is displayed above. Each item may have one or more option settings. The system BIOS automatically detects memory size, thus no changes are necessary. Use the arrow keys to highlight the item and then use PgUp or PgDn keys to select the value you want in each item. - Page 39 BIOS Setup Hard Disks This field records the specifications for all non-SCSI hard drives installed in the system. The onboard PCI IDE connectors provide Primary and Sec- ondary channels for connecting up to four IDE hard disks or other IDE devices.
-
Page 40: Advanced Bios Features
AD11 Mainboard Manual Advanced BIOS Features 3 - 4... - Page 41 BIOS Setup Anti-Virus Protection This feature starts the virus scan tool to detect if boot virus in boot sector of the first boot device when booting up. The options are: Enabled, Disabled. CPU Internal Cache When enabled, improves the system performance. Disable this item when testing or trouble-shooting.
- Page 42 AD11 Mainboard Manual Swap Floppy Drive Allows you to switch the order of floppy drives. The options are: Enabled, Disabled. Boot Up Floppy Seek When enabled, this feature enable the test of floppy drives to determine whether they have 40 or 80 tracks.
- Page 43 BIOS Setup HDD S.M.A.R.T. Capability S.M.A.R.T. stands for Self-Monitoring and Analysis Reporting Techno- logy which allows your hard disk drive to report any read/write errors and issues a warning with hard disk monitor utilities. The options are: Disabled, Enabled. Report No FDD For WIN 95 When the field under the Standard CMOS Setup Menu for Drive A and/or Drive B is set at None, users must set this field is set at Yes for it to function properly.
-
Page 44: Advanced Chipset Features
AD11 Mainboard Manual Advanced Chipset Features 3 - 8... - Page 45 BIOS Setup System BIOS Cacheable When enabled, allows the ROM area F000H-FFFFH to be cacheable when cache controller is activated. The options are: Enabled, Disabled. Video BIOS Cacheable As with caching the system BIOS above, enabling the video BIOS cache will cause access to the video BIOS addressed at C0000H-C7FFFH to be cached, if the cache controller is also enabled.
- Page 46 AD11 Mainboard Manual AGP Fast Write When set at Enabled, this feature allows user to set AGP fast write made. The options are: Enabled, Disabled AGP Data Transfer Mode This feature allows you to select the AGP slot data transfer mode. If you AGP card is of 1x or 2x, please set at 1x/2x.
- Page 47 BIOS Setup SDRAM Trc Timing Value The feature allows user to set the Trc timing value (Bank Cycle time - minimum time from activate to activation of same bank). The options are: 3 Cycle, 4 Cycle, ..., 10 Cycle. SDRAM Trp Timing Value The feature allows user to set the Trp timing value (Precharge time - time from precharge command to when back can be activated).
-
Page 48: Integrated Peripherals
AD11 Mainboard Manual Integrated Peripherals 3 - 12... - Page 49 BIOS Setup OnChip IDE Channel0 When enabled, allows you to use the onboard primary PCI IDE. If a hard disk controller card is used, set at Disabled. The options are: Enabled, Disabled. OnChip IDE Channel1 When enabled, allows you to use the onboard secondary PCI IDE. If a hard disk controller card is used, set at Disabled.
- Page 50 AD11 Mainboard Manual Secondary Slave PIO Allows an automatic or a manual configuration of the PCI secondary IDE hard disk (slave) mode. The options are: Auto, Mode 0, Mode 1, Mode 2, Mode 3, Mode 4. Primary Master UDMA Allows you to select the first PCI IDE channel of the first master hard disk mode or to detect it by the BIOS if the hard disk supports UDMA (Ultra DMA, faster than DMA).
- Page 51 BIOS Setup USB Keyboard Support This feature will appear only if the above item Onchip USB is set at En- abled. Set this feature to Enabled to use a USB keyboard with your system. The options are: Disabled (Default), Enabled. USB Mouse Support This feature will appear only if the above item Onchip USB is set at En- abled.
- Page 52 AD11 Mainboard Manual Onboard Serial Port 2 If the serial port 2 uses the onboard I/O controller, you can modify your serial port parameters. If an I/O card needs to be installed, COM3 and COM4 may be needed. The options are: 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, 3F8/IRQ4, Disabled.
- Page 53 BIOS Setup SB I/O Base Address This feature allows you to select the SB I/O base address, if the onboard Legacy audio chosen. The options are: 220H, 240H, 260H, 280H. SB IRQ Select This feature allows you to select the SB IRQ, if the onboard Legacy audio chosen.
-
Page 54: Power Management Setup
AD11 Mainboard Manual Power Management Setup 3 - 18... - Page 55 BIOS Setup ACPI function This item allows you to disable the ACPI function. The options are: Enabled, Disabled. ACPI Suspend Type This item allows you to select ACPI suspend types. The options are: S1(POS), S3 (STR). Power Management This item allows you to adjust the power management features.Select User Define for configuring your own power management features.
- Page 56 AD11 Mainboard Manual HDD Down In Suspend The items allows user to set the HDD power down as the system enters suspend mode. The options are: Enabled, Disabled. Soft-Off by PBTN The selection Delay 4 Sec. will allow the system shut down after 4 seconds after the power button is pressed.
- Page 57 BIOS Setup RTC Resume Enabled allows you to set the time the system will be turned on from the system power-off status. The options are: Enabled, Disabled. Date (of Month) This feature allows you to set the day of the alarm starts when the RTC Alarm Resume From Soft Off is set to be Enabled.
-
Page 58: Pnp/Pci Configurations
AD11 Mainboard Manual When set at On, any VGA activity will awake the system. The options are: OFF, ON. LPT & COM When LPT/COM is selected, any access of LPT and COM ports will awake the system. Likewise, either LPT or COM is chosen, the system will be awaken by any activity of LPT or COM port. - Page 59 BIOS Setup PNP OS Installed If your operating system is a Plug-and-Play one, such as Windows NT, Windows 95, select Yes. The options are: No, Yes. Reset Configuration Data Enabling it to reset the system Extended System Configuration Data (ESCD) when you exit Setup if you have installed a new add-on card and the system reconfiguration has caused such a serious conflict that the operat- ing system can not boot.
-
Page 60: Pc Health Status
AD11 Mainboard Manual PC Health Status It allows you and technicians to monitor data provided by the BIOS on this mainboard. Some of them are not user-configurable. CPU Warning Temperature This feature allows you to set the temperature to slow down the CPU clock frequency. -
Page 61: Frequency/Voltage Control
BIOS Setup Frequency/Voltage Control CPU Host/PCI Clock This feature allows you to set the CPU/PCI clock frequency. The default setting, Default, will detect your CPU/PCI clock frequency automatically. If you set a unappropriate option which leads to a booting problem, keep pressing the Insert key until the display appears will solve it. -
Page 62: Load Fail-Safe Defaults
AD11 Mainboard Manual Load Fail-Safe Defaults This submenu is selected to diagnose the problem after the computer boots, if the computer will not boot. These settings do not give optimal performance. Load Optimized Defaults This submenu is selected for default settings which provide the best system performance. -
Page 63: Supervisor/User Password
BIOS Setup Supervisor/User Password To enable the Supervisor/User passwords, select the item from the Standard CMOS Setup. You will be prompted to create your own password. Type your password up to eight characters and press Enter. You will be asked to confirm the password. -
Page 64: Save And Exit Setup
AD11 Mainboard Manual Save and Exit Setup After you have made changes under Setup, press Esc to return to the main menu. Move cursor to Save and Exit Setup or press F10 and then press Y to change the CMOS Setup. If you did not change anything, press Esc again or move cursor to Exit Without Saving and press Y to retain the Setup settings.