hit counter script

Shutoff Valve - GE 16 Owner's Manual & Installation Instructions

General electric owner's manual & installation instructions top-freezer refrigerators 16, 17, 18
Table of Contents

Advertisement

1
INSTALLING THE WATER LINE
9
CONNECT THE TUBING TO THE
REFRIGERATOR
NOTES:
• Before making the connection to the refrigerator,
be sure the refrigerator power cord is not plugged
into the wall outlet.
• We recommend installing a water filter if your
water supply has sand or particles that could clog
the screen of the refrigerator's water valve. Install
it in the water line near the refrigerator. If using
GE SmartConnect
you will need an additional tube (WX08X10002)
to connect the filter. Do not cut plastic tube to
install filter.
Remove the access cover.
Remove the plastic flexible cap from the water
valve (refrigerator connection).
Place the compression nut and ferrule (sleeve)
onto the end of the tubing as shown. On GE
SmartConnect
Refrigerator Tubing kit,
the nuts are already assembled to the tubing.
Insert the end of the tubing into the water valve
connection as far as possible. While holding the
tubing, tighten the fitting.
For plastic tubing from a GE SmartConnect
Refrigerator Tubing kit, insert the molded end
of the tubing into the shutoff valve and tighten
compression nut until it is hand tight, then
tighten one additional turn with a wrench.
Overtightening may cause leaks.
18
Installation Instructions
Refrigerator Tubing kit,
(CONT.)
9
CONNECT THE TUBING TO THE
REFRIGERATOR
Fasten the tubing into the clamp provided to
hold it in a vertical position. You may need to
pry open the clamp.
1/4" Copper
Tubing
Refrigerator
Connection
Reattach the access cover.
10
TURN THE WATER ON AT THE

SHUTOFF VALVE

Tighten any connections that leak.
Reattach the access cover.
(CONT.)
Tubing Clamp
1/4" Compression
Nut
Ferrule
(sleeve)
SmartConnect
Tubing

Advertisement

Table of Contents
loading

This manual is also suitable for:

1718

Table of Contents

Save PDF