GE JBP45 Owner's Manual
Ranges, self-cleaning electric
Hide thumbs
Also See for JBP45:
- Owner's manual (44 pages) ,
- Use and care & installation manual (41 pages) ,
- Use and care & installation manual (36 pages)
Related Manuals for GE JBP45
Summary of Contents for GE JBP45
- Page 1 GE Appliances Owner’s Manual JBP19 JBP21 JBP24 JBP25 JBP26 JBP30 JBP45 JBP46 JBP47 ® GE Answer Center 800.626.2000 Part No. 164D3333P035 Pub. No. 49-8781...
- Page 2 Congratulations! You Are Now Part of the GE Family. Welcome to the GE family. We’re proud of our quality products and we are committed to providing dependable service. You’ll see it in this easy-to- use Owner’s Manual and you’ll hear it in the friendly voices of our customer service department.
-
Page 3: Table Of Contents
GE & You, A Service Partnership. Ask any GE appliance owner and they will tell you we stand behind our products with unmatched quality service. However, did you know that most questions result from simple problems that you can easily fix yourself in just a few minutes? This Owner’s Manual can tell you how. -
Page 4: Anti-Tip Device
If you pull the range out from the wall for any reason, make sure the device is properly engaged when you push the range back against the wall. If it is not, there is a possible risk of the range tipping over and causing injury if you or a child stand, sit or lean on an open door. -
Page 5: Safety Precautions
Do not allow anyone to climb, stand or hang on the door, storage drawer or cooktop. They could damage the range and even tip it over, causing severe personal injury. Do not store flammable materials in an oven or near the cooktop. -
Page 6: Important Safety Information
Do not let cooking grease or other flammable materials accumulate in or near the range. Do not use water on grease fires. Never pick up a flaming pan. Turn the controls off. Smother a flaming pan... -
Page 7: Oven
OVEN Stand away from the range when opening the oven door. Hot air or steam which escapes can cause burns to hands, face and/or eyes. -
Page 8: Oven
IMPORTANT SAFETY INFORMATION. READ ALL INSTRUCTIONS BEFORE USING. WARNING! SELF-CLEANING OVEN Do not clean the door gasket. The door gasket is essential for a good seal. Care should be taken not to rub, damage or move the gasket. Clean only parts listed in this Owner’s Manual. -
Page 9: Surface Cooking Units
Always turn the surface units off before removing cookware. Do not immerse or soak the removable surface units. - Page 10 Your continued health and safety are important to us. Please read and follow this Safety Information carefully. We want you to remain a happy and healthy part of our GE family. SAVE THESE INSTRUCTIONS Use little fat for effective shallow or deep fat frying.
-
Page 11: Using The Surface Units
Using the surface units. Be sure you turn the control knob to OFF when you finish cooking. Not over 1 inch Use only flat-bottomed woks. How to Set Push the knob in and turn in either direction to the setting you want. At both OFF and HI the control clicks into position. -
Page 12: Using The Oven
Using the oven controls. Throughout this manual, features and appearance may vary from your model. COOK TIMER TIME ON/OFF ON/OFF START CLOCK TIME ON/OFF Clock and Timer Features AUTOMATIC OVEN AUTOMATIC OVEN Light This lights anytime the oven has been programmed. START TIME ON/OFF Press this pad and the HOUR and MIN. - Page 13 OVEN ON BROIL AUTO LATCH SELF DOOR CLEAN PREHEATED Oven Control Settings OVEN ON Light Glows anytime the oven is heating. The light will flash when the oven automatically turns off to remind you to turn the Oven Temperature knob to OFF . LATCH DOOR Light Glows when the oven is in the self-clean cycle.
-
Page 14: Using The Oven
Using the oven. To avoid possible burns, place the shelves in the desired position before you turn the oven on. The oven has 4 shelf positions. Before you begin… The shelves have stop-locks, so that when placed correctly on the supports, they will stop before coming completely out, and will not tilt. - Page 15 Preheating and Pan Placement Preheat the oven if the recipe calls for it. To preheat, set the oven at the correct temperature. Preheating is necessary for good results when baking cakes, cookies, pastry and breads. For ovens without a preheat indicator light or tone, preheat 10 minutes. Baking results will be better if baking pans are centered as much as possible.
-
Page 16: Broiling Guide
Broiling guide Quantity and/ Food or Thickness Position Time (min.) Time (min.) Comments Bacon 1/2 lb. (about 8 thin slices) Ground Beef 1 lb. (4 patties) Well Done 1/2 to 3/4 thick Beef Steaks Rare 1 thick Medium (1 to 1 ⁄... -
Page 17: Using The Clock And Timer
Using the clock and timer. CLOCK Make sure the clock is set to the correct time of day. TIMER ON/OFF The timer is a minute timer only. The timer does not control oven operations. The maximum setting on the timer is 11 hours and 59 minutes. COOK TIMER TIME... -
Page 18: Timed Baking And Roasting
Using the timed baking and roasting features. Do not latch the oven door during timed cooking. The latch is used for self-cleaning only. NOTE: Foods that spoil easily, such as milk, eggs, fish, stuffings, poultry and pork, should not be allowed to sit for more than 1 hour before or after cooking. -
Page 19: Oven Thermostat
Adjust the oven thermostat—Do it yourself! You may find that your new oven cooks differently than the one it replaced. Use your new oven for a few weeks to become more familiar with it. If you still think your new oven is too hot or too cold, you can adjust the thermostat yourself. -
Page 20: Using The Self-Cleaning Oven
SELF DOOR CLEAN Before a Clean Cycle The range must be completely cool in order to set the self-clean cycle. We recommend venting with an open window or using a ventilation fan or hood during the first self-clean cycle. Remove all cookware and any aluminum foil from the oven. - Page 21 OVEN ON PREHEATED BROIL AUTO LATCH SELF DOOR CLEAN START TIME ON/OFF After a Clean Cycle You may notice some white ash in the oven. Wipe it up with a damp cloth after the oven cools. If white spots remain, remove them with a soap-filled steel wool pad and rinse thoroughly with a vinegar and water mixture.
-
Page 22: Care And Cleaning
Do not use commercial oven cleaners, cleaning powders, steel wool or harsh abrasives on any painted surface. If your range is removed for cleaning, servicing or any reason, be sure the anti-tip device is re-engaged properly when the range is replaced. - Page 23 Lift the door straight up and off the hinges. The gasket is designed with a gap at the bottom to allow for proper air circulation. Lift-Off Oven Door The oven door is removable for cleaning. Do not lift the door by the handle. To remove the door, open it to the special stop position.
- Page 24 Clean the shelves with an abrasive cleanser or steel wool. Oven Light Replacement CAUTION: Before replacing your oven light bulb, disconnect the electrical power to the range at the main fuse or circuit breaker panel. Be sure to let the light cover and bulb cool completely.
- Page 25 Both the broiler pan and grid can also be cleaned in the dishwasher. Do not store a soiled broiler pan and grid anywhere in the range. How to Remove the Storage Drawer or Kick Panel to Clean Under the Range To remove the storage drawer: Pull the drawer out all the way.
- Page 26 Care and cleaning of the range. Porcelain Enamel Cooktop The porcelain enamel finish is sturdy but breakable if misused. This finish is acid-resistant. However, any acidic foods spilled (such as fruit juices, tomato or vinegar) should not be permitted to remain on the finish.
- Page 27 Do not cover the drip pans with foil. Using foil so close to the receptacle could cause shock, fire or damage to the range. Surface Units To clean the surface units, turn the control to the highest setting for a minute.
-
Page 28: Before You Begin
Wiring must conform to National Electric Codes. If the electric service provided does not meet the above specifications, have a licensed electrician install an approved outlet. Because range terminals are not accessible after range is in position, flexible service conduit or cord must be used. -
Page 29: Prepare The Opening
EXCEPTION: Installation of a listed microwave oven or cooking appliance over the cooktop shall conform to the installation instructions packed with that appliance. If cabinet storage is installed, reduce risk by installing a range hood that projects horizontally a min. of 5 beyond the bottom of the cabinets. Make sure the wall covering, countertops and cabinets around the range can withstand heat generated by the range, oven or cooktop up to 200°F. -
Page 30: Electrical Connection
Read these instructions completely and carefully. Flooring Under the Range Your range, like many other household items, is heavy and can settle into soft floor coverings such as cushioned vinyl or carpeting. When moving the range on this type of flooring, it should be installed on a... - Page 31 Power Cord Strain Relief Installation Remove the lower rear range wiring cover to expose the connector block and bracket. Remove the knockout ring (1 connector. To remove the knockout, use a pair of pliers to bend the knockout ring away from the bracket and twist until ring is removed.
- Page 32 Installation of the range. Read these instructions completely and carefully. 3-Wire Power Cord Installation WARNING: The neutral or ground wire of the power cord must be connected to the neutral terminal located in the center of the connector block. The power leads must be connected to the outside (brass colored) terminals.
- Page 33 The power leads must be connected to the outside (brass colored) terminals. The 4th grounding lead must be connected to the frame of the range with the grounding plate and grounding screw. Remove the 3 screws from the connector block.
- Page 34 Installation of the range. Read these instructions completely and carefully. 3-Wire Conduit Installation Remove the 3 screws from the connector block. Insert bare wires between the connector block terminals and movable nuts. Tighten screws securely. Do not remove ground strap connection.
- Page 35 Remove the 3 screws from the connector block. Remove the grounding strap from the connector block middle location and the screw connecting it to the frame of the range. Insert bare wires between the connector block terminals and movable nuts. Tighten screws securely. Attach ground wire to the frame of the range.
-
Page 36: Leveling
Screw must enter wood or metal Leveling the Range The range must be level. Leveling feet are located at each corner of the base of the range. Remove the storage drawer or kick panel (depending on your model) and using channel locks, rotate the leveling feet in and out as required to level the range. -
Page 37: Troubleshooting Tips
• Light bulb is loose or defective. • Switch operating light is broken. • Plug on range is not completely inserted in the electrical outlet. A fuse in your home • may be blown or the circuit breaker tripped. •... -
Page 38: Troubleshooting Tips
See the Using the oven section. See the Broiling guide . Use the broiling pan and grid that came with your range. Make sure it is cool. Use the broiling pan and grid that came with your range. See the Using the oven section. - Page 39 Replace fuse or reset circuit breaker. See the Using the clock • and timer section. • Allow the range to cool to room temperature and reset the controls. • Make sure you turn the control knob all the way to the AUTO SELF CLEAN position.
- Page 40 Before you call for service… Troubleshooting Tips Problem Excessive smoking Oven door will not unlock Oven not clean after a clean cycle LATCH DOOR light flashes Oven door is crooked Possible Causes Excessive soil. Oven too hot. Oven controls not properly set.
- Page 41 OFF . Allow the oven to cool for one hour. Put the oven back into operation. • Disconnect all power to the range for 5 minutes and then reconnect power. If the function error code repeats, call for service. • Some models will...
- Page 42 Notes...
-
Page 43: Warranty
For service, We Will Replace, At No Charge To You: Any part of the range which fails due to a defect in materials or workmanship. During this full one-year warranty, we will also provide, free of charge, all labor and in-home service to replace the defective part. -
Page 44: Service Telephone Numbers
Expert GE repair service is only a phone call away. Special Needs Service TDD 800-TDD-GEAC (800-833-4322) GE offers, free of charge, a brochure to assist in planning a barrier- free kitchen for persons with limited mobility. Service Contracts Purchase a GE service contract while your warranty is still in effect and you’ll receive a substantial discount.