Warranty ....23 Write the model and serial numbers here: Model # ________________ Serial # ________________ They are on the label on the front of the dryer behind the door. 500A277P047 175D1807P424 49-90160 06-03 JR Owner’s Manual DPSB613 DPSB619...
IMPORTANT SAFETY INFORMATION. READ ALL INSTRUCTIONS BEFORE USING. WARNING! For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or death. Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
This dryer must be properly installed and located in accordance with the Installation Instructions before it is used. If you did not receive an Installation Instructions sheet, you can receive one by visiting GEAppliances.com, or by calling 800.GE.CARES (800.432.2737). s Properly ground dryer to conform with all governing codes and ordinances.
Page 4
IMPORTANT SAFETY INFORMATION. READ ALL INSTRUCTIONS BEFORE USING. WARNING! YOUR LAUNDRY AREA s Keep the area underneath and around your appliances free of combustible materials (lint, paper, rags, etc.), gasoline, chemicals, and other flammable vapors and liquids. s Keep the floor around your appliances clean and dry to reduce the possibility of slipping.
WHEN USING YOUR DRYER (cont.) s Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug. s The interior of the machine and the exhaust duct connection inside the dryer should be cleaned at least once a year by a qualified technician.
You can locate your model number on the label on the front of the dryer, behind the door. NOTE: Any time you make a selection that is incompatible with the chosen dry cycle, the dryer will beep twice. Model DPSB613 Model DPSB619...
selections. OUCH cycles use the Sensor Dry Plus feature, which continuously monitors the amount of moisture in the load and stops the OUCH dryer when the clothes are dry. Throughout this manual, features and appearance may vary from your model. PRESS...
About drying cycles. Throughout this manual, features and appearance may vary from your model. DRYEL ™ This feature is designed for use with the DRYEL See product package for directions. For questions or issues related to the use and performance of DRYEL call 1-800-214-8913, or visit the DRYEL Automatic DRYEL DEWRINKLE...
About dryness levels. MORE DRY Use for heavy-duty fabrics. Use for a normal dryness level suitable for most loads. This is the preferred cycle for energy saving. LESS DRY Use for lighter fabrics. DAMP For leaving items partially damp. About timed dry cycles. To use TIMED DRY: 1.
About control features. Throughout this manual, features and appearance may vary from your model. START/PAUSE s Press twice to select the last cycle you used and start the dryer. s If you have selected a new cycle, press once to start the cycle. s If the dryer is running, press once to interrupt the cycle;...
About cycle options. NOTE: Not all features are available on all dryer models. SIGNAL Alerts you that the cycle is complete. The beeper will continue to sound every two minutes for the next 6 minutes, until the clothes are removed. The clothes should (Appearance and be removed when the beeper goes off so wrinkles won’t set in.
About cycle status. These cycle status indicator lights display what part of the cycle the dryer is in and remind you to clean the lint filter. SensorDry Plus This light comes on when a O TIMED DRY This light comes on when AIR DRY, DEWRINKLE, DRYEL is selected.
(on some models) The stainless steel used to make the dryer drum provides the highest reliability available in a GE dryer. If the dryer drum should be scratched or dented during normal use, the drum will not rust or corrode. These...
About reversing the door. Reversing the Door Tools needed: s Standard #2 s Tape-tipped Phillips screwdriver putty knife Open the door and remove the filler plugs opposite the hinges. With the door completely open, remove the bottom screw from each hinge on the dryer face.
They may cause fabric softener stains. Bounce ® Fabric Conditioner Dryer Sheets have been approved for use in all GE Dryers when used in accordance with the manufacturer’s instructions. Care and Cleaning of the Dryer The Exterior: Wipe or dust any spills or washing compounds with a damp cloth.
Venting the dryer. For the best drying performance the dryer needs to be properly vented. The dryer will use more energy and run longer if it is not vented to the below specifications. Carefully follow the details on Exhausting in the Installation Instructions. s Use only rigid metal 4″...
Before you call for service… Troubleshooting Tips Save time and money! Review the charts on the following pages, or visit GEAppliances.com. You may not need to call for service. OPERATION Possible Causes Control pads not Controls accidentally put in responding service mode Dryer doesn’t start Control panel is “asleep”...
Page 18
Before you call for service… OPERATION Possible Causes The DRY dryness level Load consists of a mixture was chosen but load is of heavy and light fabrics still damp Exhaust system is blocked Cannot make a The DRYNESS LEVEL, HEAT selection and the SETTING or OPTION that dryer beeps twice...
Page 19
• Try a fabric softener. • Bounce ® Fabric Conditioner Dryer Sheets have been approved for use in all GE Dryers when used in accordance with the manufacturer’s instructions. • Try a fabric softener. • Adjust setting to LESS DRY or DAMP.
Page 21
You can rest easy, knowing that all your valuable household products are protected against expensive repairs. Place your confidence in GE and call us in the U.S. toll-free at for more information. *All brands covered, up to 20 years old, in the continental U.S.
Year * Please provide your e-mail address to receive, via e-mail, discounts, special offers and other important communications from GE Appliances (GEA). Check here if you do not want to receive communications from GEA’s carefully selected partners. FAILURE TO COMPLETE AND RETURN THIS CARD DOES NOT DIMINISH YOUR WARRANTY RIGHTS.
Page 23
Any part of the dryer which fails due to a defect in materials or workmanship. During this From the date of the full one-year warranty, GE will also provide, free of charge, all labor and related service costs original purchase to replace the defective part.
Caution must be exercised, since improper servicing may cause unsafe operation. Contact Us If you are not satisfied with the service you receive from GE, contact us on our Website with all the details including your phone number, or write to: General Manager, Customer Relations Register Your Appliance Register your new appliance on-line—at your convenience! Timely product registration will allow for...