Table of Contents
Advertisement
MIC412TI and MIC412TF Camera | Installation and Operation Manual
Advanced Settings
The
Advanced Settings
tab offers engineering and special auxiliary control modes
for Pelco and Panasonic protocols (see Help file for details).
The MIC stores various statistics about itself, including temperature and humidity,
and various timers for different parameters, which may be of interest to the end
user, but are mainly implemented as an engineering tool.
Bosch Security Systems
Temperature and Humidity
This will only work if the MIC400 has the appropriate control card with the
temperature and humidity sensor attached. Current,
both in degrees and a percentage respectively. If the MIC reaches 70% humidity
inside the head a small "H" is displayed in the top left corner indicating a Humidity
problem. If this appears, make contact with Bosch Security Systems.
Timers
The timers monitor most of the common functionalities of a MIC: Panning, Tilting,
On Tour, Since Built, Stationary, Wiping and IR Lamp shown in Weeks, Days,
Hours, Minutes and Seconds.
Clear All Statistics
This function will set Max and Min for temperature and humidity to the current
reading, and will clear all of the timers to "0". This feature should only be used
when a MIC is first built or repaired, and therefore is locked out with the Advanced
Controls Password.
MIC Serial Number
This feature is used to set or read the actual MIC Serial Number. This may be
required to reprogram the MIC through the telemetry. The Set function is locked
out with the Advanced Password as this should only be performed at the
manufacturing stage, however read is available to use as required.
Issue 8
AAA
EN | 37
Max
and
Min
are displayed for
Advertisement
Table of Contents
