Advertisement
Quick Links
How to fix the protective glass for X401S
PARTS LIST
Description
Location
PROTECTION GLASS X401S
GLS-1
BRK-1
X401S HOLDER GLASS A
BRK-2
X401S HOLDER GLASS B
CUS-1
BRACKET LED TAPE CUSHION
CUSHION
DOUBLE SIDE TAPE
CUS-2
DOUBLE SIDE TAPE CUSHION
CUSHION
DOUBLE SIDE TAPE
DOUBLE SIDE TAPE CUSHION
CUS-3
CUSHION
DOUBLE SIDE TAPE
[CUS-1] BRACKET LED TAPE CUSHION：98 X 8 X 0.65
8
Cushion
DOUBLE SIDE
[CUS-2] DOUBLE SIDE TAPE CUSHION：454.2 X 8 X 0.8
8
Cushion
DOUBLE SIDE
[CUS-3] DOUBLE SIDE TAPE CUSHION：832.6 X 8 X 0.8
8
Cushion
DOUBLE SIDE
Part No
Q'ty
909.4±1.0mm X 521±0.7mm X 4.0±0.3mm
―
1
2
2
―
1
98mm X 8mm X 0.65mm
―
2
454.2mm X 8mm X 0.8mm
―
2
832.6mm X 8mm X 0.8mm
98
Cushion
Parts_list
Spec
454.2
Cushion
832.6
Cushion
Advertisement
Related Manuals for NEC MultiSync X462S PG (Protective Glass
Summary of Contents for NEC MultiSync X462S PG (Protective Glass
- Page 1 How to fix the protective glass for X401S PARTS LIST Description Spec Location Part No Q'ty PROTECTION GLASS X401S 909.4±1.0mm X 521±0.7mm X 4.0±0.3mm GLS-1 ― BRK-1 X401S HOLDER GLASS A BRK-2 X401S HOLDER GLASS B CUS-1 BRACKET LED TAPE CUSHION CUSHION ―...
- Page 2 How to fix the protective glass for X401S 1. Remove BEZEL and BRACKET PWB IR. (Amount of the screws that fix BEZEL is 8 pieces. ) Remove 8 SCREWS. Remove the BEZEL ATTENTION Remove catching of a hook. (4 places ) REMOVE BRACKET PWB IR Page-1...
- Page 3 Paste CUS-2 and CUS-3 (DOUBLE SIDE TAPE CUSHION) and peel off separator. Refer to SPEC of PARTS LIST for the specification of CUS-2 and CUS-3. ATTENTION Don'ｔ paste CUS-2 and CUS-3 on PANEL'S ACTIVE AREA. Paste CUS-2 and CUS-3 832.6mm CUS-3 ATTENTION CUS-2...
- Page 4 3. Assemble GLS-1(PROTECTION GLASS X401S). Before assembling, check if there's no dust or fingerprint and so on. If find it, remove by cleaning cloth. 1.6mm ATTENTION Before assembling PROTECTION GLASS to PANEL, remove dust from PROTECTION GLASS and PANEL-front surface. Assemble GLS-1 Peel off separator of CUS-2 and CUS-3 1.6mm...
- Page 5 4. Assemble BRK-1 and BRK-2 (X401S HOLDER GLASS A/B). Assemble BRK-1 and BRK-2 BRK-1 BRK-2 BRK-2 BRK-1 ATTENTION Insert BRK-1 and BKT-2 between PANEL and BACK COVER. Page-4...
- Page 6 5. Paste CUS-1 (BRACKET LED TAPE CUSHION). Assemble BRACKET PWB IR again. Refer to SPEC of PARTS LIST for the specification of CUS-1. Assemble BRACKET PWB IR again. Paste CUS-1 CUS-1 ATTENTION Insert the positioning of BRACKET PWB IR in the hole of a picture.
- Page 7 6. Rotate and install HOLE CAP. Remove HOLE CAP Push Rotate HOLE CAP Remove Rotate Install HOLE CAP Insert Page-6...
- Page 8 7. Assemble BEZEL again. Push Assemble BEZEL again. ATTENTION Check that the hook is catching firmly. (4 places ) Install 8 SCREWS. FIXING SEQUENCE : 1 → 2 ATTENTION Fix screw in a specified hole. T=4±1kgf.cm ATTENTION Fix screw by the specified torque. Page-7...